Date: Tue, 05 Dec 2006 12:14:40 +0000 From: "Marwan Sultan" <dead_line@hotmail.com> To: lane@joeandlane.com, freebsd-questions@freebsd.org Subject: Re: Duo core enable/support help. Message-ID: <BAY104-F380F837FAD01A8CF3468BE9ADE0@phx.gbl> In-Reply-To: <200612041858.45873.lane@joeandlane.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Lane! I'm a frequent reader to /usr/src/UPDATING But whenever I need to update or upgrade only, since years! Also I knew very well whats KERNCONF! i just wanted to know and make sure of the duo core options, and i searched the NOTES file, didnot find anything about it. Thank you for your "short" problematic answer :) by the way, After recompiling the kernel and From my dmesg -------------------- ACPI APIC Table: <INTEL D11020M > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 SMP: AP CPU #1 Launched! --------------------- But I still have few dmesg errors, these are the lines, acpi0: <INTEL D11020M> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21 acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_perf1: <ACPI CPU Frequency Control> on cpu1 acpi_perf1: failed in PERF_STATUS attach device_attach: acpi_perf1 attach returned 6 acpi_perf1: <ACPI CPU Frequency Control> on cpu1 acpi_perf1: failed in PERF_STATUS attach device_attach: acpi_perf1 attach returned 6 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_button0: <Power Button> on acpi0 and usb2: waiting for BIOS to give up control usb2: timed out waiting for BIOS usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <ATI SB400 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 Any easy problematic ideas? :) Thank you ---Marwan >First read /usr/src/UPDATING. > >Really. > >No, really. I mean read it :) > >And, since no one expects you to really, really read it, I'll give you some >shortcuts. > >First, look for the word KERNCONF in /usr/src/UPDATING > >Read all of the language around every occurence of that word (KERNCONF). > >Then, when you are ready, do this: > >make buildkernel KERNCONF=SMP >make installkernel KERNCONF=SMP > >Then reboot. > >Note here that I'm giving you the shortest possible route, which may be >problematic for you. You really must become familiar with >/usr/src/UPDATING. > >Anyway, after the reboot, you should type: > >cat /var/log/messages | grep -i launch > >if you see the terms "CPU1 Launched!" then you've got yourself an SMP >kernel. > >Good Luck! > >lane _________________________________________________________________ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY104-F380F837FAD01A8CF3468BE9ADE0>