Date: Thu, 11 Apr 2002 02:31:47 +0900 (JST) From: Norikatsu Shigemura <n-shigemura@ensure-tech.co.jp> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/36970: kernel cannot root device, ar0s1a on boot Message-ID: <200204101731.g3AHVlUg030574@nd250009.gab.xdsl.ne.jp>
next in thread | raw e-mail | index | archive | help
>Number: 36970 >Category: kern >Synopsis: kernel cannot root device, ar0s1a on boot >Confidential: no >Severity: critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Apr 10 10:40:00 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Norikatsu Shigemura >Release: FreeBSD 4.5-STABLE i386 >Organization: Ensure Technology Ltd. (http://www.ensure-tech.co.jp) >Environment: System: FreeBSD XXXX.XXXX.co.jp 4.5-STABLE FreeBSD 4.5-STABLE #0: Thu Apr 10 19:33:51 JST 2002 nork@XXXX.XXXX.co.jp:/usr/obj/usr/src/sys/ENSURE i386 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Thu Apr 10 19:33:51 JST 2002 nork@XXXX.XXXX.co.jp:/usr/src/sys/compile/ENSURE Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (996.55-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536805376 (524224K bytes) avail memory = 517623808 (505492K bytes) Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 10 entries at 0xc00f7700 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci2: <PCI bus> on pcib1 pci2: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 12 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 12 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0 pcib2: <DEC 21152 PCI-PCI bridge> at device 9.0 on pci0 pci1: <PCI bus> on pcib2 dc0: <Intel 21143 10/100BaseTX> port 0x6000-0x607f mem 0xdd5ff000-0xdd5ff3ff irq 11 at device 4.0 on pci1 dc0: Ethernet address: 00:80:c8:c9:ec:39 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: <Intel 21143 10/100BaseTX> port 0x6400-0x647f mem 0xdd5ff400-0xdd5ff7ff irq 9 at device 5.0 on pci1 dc1: Ethernet address: 00:80:c8:c9:ec:3a miibus1: <MII bus> on dc1 ukphy1: <Generic IEEE 802.3u media interface> on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc2: <Intel 21143 10/100BaseTX> port 0x6800-0x687f mem 0xdd5ff800-0xdd5ffbff irq 12 at device 6.0 on pci1 dc2: Ethernet address: 00:80:c8:c9:ec:3b miibus2: <MII bus> on dc2 ukphy2: <Generic IEEE 802.3u media interface> on miibus2 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc3: <Intel 21143 10/100BaseTX> port 0x6c00-0x6c7f mem 0xdd5ffc00-0xdd5fffff irq 10 at device 7.0 on pci1 dc3: Ethernet address: 00:80:c8:c9:ec:3c miibus3: <MII bus> on dc3 ukphy3: <Generic IEEE 802.3u media interface> on miibus3 ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f mem 0xdfc00000-0xdfcfffff,0xdffbe000-0xdffbefff irq 9 at device 14.0 on pci0 fxp0: Ethernet address 00:20:ed:18:20:1e inphy0: <i82555 10/100 media interface> on miibus4 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc800-0xc83f mem 0xdfe00000-0xdfefffff,0xdffbf000-0xdffbffff irq 12 at device 15.0 on pci0 fxp1: Ethernet address 00:20:ed:18:20:1f inphy1: <i82555 10/100 media interface> on miibus5 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci1: <Promise ATA100 controller> port 0xcc00-0xcc3f,0xd000-0xd003,0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc07 mem 0xdffe0000-0xdfffffff irq 10 at device 16.0 on pci0 ata2: at 0xdc00 on atapci1 ata3: at 0xd400 on atapci1 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ar0: 76345MB <ATA RAID1 array> [9732/255/63] subdisks: ad4: 76345MB <MAXTOR 6L080J4> [155114/16/63] at ata2-master UDMA100 ad6: 76345MB <MAXTOR 6L080J4> [155114/16/63] at ata3-master UDMA100 acd0: CDROM <SR243T> at ata1-master using PIO4 Mounting root from ufs:ad0s1a Root mount failed: 6 Mounting root from ufs:ad0a Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:/dev/da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot> ufs:/dev/ar0s1a / Mounting root from ufs:/dev/ar0s1a / - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - >Description: /kernel of FreeBSD 4-STABLE(cvsuped from cvsup.jp.freebsd.on on Apr 10 16:00:00+0900) cannot root device, ufs:ar0s1a. /kernel intended to find ad0s1a and ad0a. >How-To-Repeat: I don't know. I think this problem is in others, but I have no others environment. >Fix: I don't know. >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200204101731.g3AHVlUg030574>