Date: Sun, 4 Jun 2006 15:42:18 -0400 From: "Lisandro Grullon" <lisandro.grullon@gmail.com> To: "Areca Support" <support@areca.com.tw> Cc: freebsd-bugs@freebsd.org, freebsd-questions@freebsd.org Subject: Re: Ask a Question Message-ID: <9a4a258a0606041242q1e597a3apf3bea4355f9bedee@mail.gmail.com> In-Reply-To: <008401c6831f$816b1020$6800a8c0@arecakevin> References: <WEB18cDjoYAPNXRPmca00000011@203-69-42-38.hihosting.hinet.net> <001d01c67faf$7cfdccd0$6800a8c0@arecakevin> <9a4a258a0605260700m27202fc0q223978f3361d5383@mail.gmail.com> <9a4a258a0605260714l2709c3e1v15670677043176b3@mail.gmail.com> <008401c6831f$816b1020$6800a8c0@arecakevin>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Kevin, After going through all my options with the areca 1120, the solution was easy and at the same time hard for someone new to FreeBSD. The card works 100% with freeBSD 6.1, the only thing I needed to do was upgrade to the latest firmware from the website. Specifically the one that you guys are beta testing dated "5/26/2006 2:15:00 PM" you might want to tell all your comstomers using this card with FreeBSD to upgrade to the latest firmware if they are having issues. Thank you again for e-mailing back and forward, again this is not a FreeBSD bug, it appears to be a firmware bug that is fixed in your latest "Beta" firmware. Your FreeBSd user, Lisandro Grullon On 5/29/06, Areca Support <support@areca.com.tw> wrote: > > Dear Sir, > > as we known, our controller driver had been buildin from FreeBSD 5.4, and > 6.0 also. so we didn't make new installation disk for FreeBSD after that. > > and regarding the firmware changes, normally we will added these changes > into the firmware released note. > for the Beta version, because we are testing it still, so we didn't upload > changes to avoid confusion. > i will forward your comment to our engineers, thanks for your suggestion. > > and regarding the AMD64 FreeBSD 6.1 installation. after kernel loaded, and > system shows no hard disk for installation. > could you please switch to console, and do a dmesg to check the driver > status ? > does our driver module loaded ? any error message on the driver ? > > we had tested FreeBSD 6.1 i386 edition before, it had buildin our > controller driver, no additional driver disk needed. but we didn't verifyed > AMD64 edition, i will ask our testing to verify it. > > > Best Regards, > > > Kevin Wang > > Areca Technology Tech-support Division > Tel : 886-2-87974060 Ext. 223 > Fax : 886-2-87975970 > Http://www.areca.com.tw <http://www.areca.com.tw> > Ftp://ftp.areca.com.tw <ftp://ftp.areca.com.tw> > > ----- Original Message ----- > *From:* Lisandro Grullon <lisandro.grullon@gmail.com> > *To:* Areca Support <support@areca.com.tw> > *Sent:* Friday, May 26, 2006 10:14 PM > *Subject:* Re: Ask a Question > > I am about to flahs the firmware of this board, maybe that would fix the > problem;however, I would recoemend that your evelopment team post, what > these two firmware version are all about. What I mean is what changes happen > in each of the two version that you guys are currently beta testing. Bellow > is the link. > > ftp://ftp.areca.com.tw/RaidCards/BIOS_Firmware/ARC1120/Beta > > > > On 5/26/06, Lisandro Grullon <lisandro.grullon@gmail.com> wrote: > > > > Your website doesn't mention anything about supporting FreeBSD 6.0, > > what's the status on those drivers. The freeBSd community would really like > > to see some drivers supporting the current Release of FreeBSD. A lot of my > > collegues are just waiting for the driver release before they make their > > purchase, can you elaborate on this. Lisandro > > > > On 5/24/06, Areca Support < support@areca.com.tw> wrote: > > > > > Dear Sir, > > > > > > This is Kevin Wang from Areca Technology, Tech-Support Team. > > > regarding your problem, it looks like a FreeBSD bug, here is a > > > discussion i > > > found in google : > > > http://www.linuxquestions.org/questions/showthread.php?t=429394 > > > > > > > > > Best Regards, > > > > > > > > > Kevin Wang > > > > > > Areca Technology Tech-support Division > > > Tel : 886-2-87974060 Ext. 223 > > > Fax : 886-2-87975970 > > > Http://www.areca.com.tw > > > Ftp://ftp.areca.com.tw > > > > > > ----- Original Message ----- > > > From: "Lisandro Grullon" < lisandro.grullon@gmail.com> > > > To: <support@areca.com.tw> > > > Sent: Wednesday, May 24, 2006 11:14 PM > > > Subject: Ask a Question > > > > > > > > > > Your name : Lisandro Grullon > > > > YourEmail : lisandro.grullon@gmail.com > > > > Category : PCI SATA ll RAID controller > > > > Model name : Areca 1120 > > > > Firmware Version : V1.39 > > > > Disk Vendor : Seagate > > > > Disk model : ST3300822AS > > > > Disk Firmware Version : > > > > HBA Vendor : > > > > HBA Model Name : > > > > Motherboard Vendor : Tyan > > > > Motherboard Model name : S2885 > > > > Motherboard BIOS Version : Latest > > > > Your Question : I am having a problem configuring the controller in > > > > FreeBSD 6.1. It all works out ok, the OS detects the card and I use > > > the > > > > drivers you supply in the website. The only problem is that when I > > > try > > > > creating the partition using the fdisk/label from sysinstall I am > > > getting > > > > a "disk geometry" error. Aparently the geometry is not correct, if > > > there a > > > > way that I could check the geometry of the volume/drive that are > > > attach to > > > > the controller, please let me know. > > > > > > > > Your Cumstomer, > > > > Lisandro Grullon > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Lisandro Grullon > > New York City College of Technology > > Division of Continuing Education > > Director of Network Operations > > Lisandro Office: 1718-552-1178 > > Lisandro E-mail: lgrullon@citytech.cuny.edu > > "The only reason for time is so that everything doesn't happen at > > once.". <Albert Einstein> > > > > > > -- > Lisandro Grullon > New York City College of Technology > Division of Continuing Education > Director of Network Operations > Lisandro Office: 1718-552-1178 > Lisandro E-mail: lgrullon@citytech.cuny.edu > "The only reason for time is so that everything doesn't happen at once.". > <Albert Einstein> > -- Lisandro Grullon New York City College of Technology Division of Continuing Education Director of Network Operations Lisandro Office: 1718-552-1178 Lisandro E-mail: lgrullon@citytech.cuny.edu "The only reason for time is so that everything doesn't happen at once.". <Albert Einstein>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9a4a258a0606041242q1e597a3apf3bea4355f9bedee>