Date: Mon, 19 Dec 2005 12:24:25 -0600 From: bruce@zuhause.mn.org To: freebsd-multimedia@freebsd.org Subject: Problem recognizing two PVR 250s in Freebsd 6.0 Message-ID: <17318.64217.648153.15652@celery.zuhause.org>
next in thread | raw e-mail | index | archive | help
I upgraded this machine from FreeBSD 4.11 to FreeBSD 6.0 yesterday, and
for a little while it was recognizing both tuner cards, but when I was
putzing around with getting the sound to work, it stopped recognizing
one of the cards. Does anyone have any ideas on what I should do
next to troubleshoot this?
Here are the pertinent lines from the last reboot
(with the sound not initialized):
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Sun Dec 18 19:34:03 CST 2005
toor@soyo.zuhause.org:/usr/obj/usr/src/sys/soyo
ACPI APIC Table: <KT600 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2800+ (2083.11-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1041768448 (993 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <KT600 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xa000-0xa0ff mem 0xef000000-0xef0000ff irq 20 at device 8.0 on pci0
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pci0: <multimedia, video> at device 9.0 (no driver attached)
atapci0: <ITE IT8212F UDMA133 controller> port 0xa400-0xa407,0xa800-0xa803,0xac00-0xac07,0xb000-0xb003,0xb400-0xb40f irq 18 at device 10.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
cxm0: <Conexant iTVC16 MPEG Coder> mem 0xe8000000-0xebffffff irq 19 at device 11.0 on pci0
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
cxm0: LG Innotek TAPC-H701F tuner
cxm0: SAA7115 rev 1 video decoder
cxm0: MSP4448G-B3 audio decoder
cxm0: IR Remote
cxm0: [GIANT-LOCKED]
cxm0: encoder firmware version 0x2040024
atapci1: <VIA 6420 SATA150 controller> port 0xb800-0xb807,0xbc00-0xbc03,0xc000-0xc007,0xc400-0xc403,0xc800-0xc80f,0xcc00-0xccff irq 20 at device 15.0 on pci0
atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 15.1 on pci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhci3: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xef001000-0xef0010ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xef002000-0xef0020ff irq 23 at device 18.0 on pci0
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:2c:a1:05:a5
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
And from the pciconf -v -l:
none0@pci0:9:0: class=0x040000 card=0x40090070 chip=0x00144444 rev=0x01 hdr=0x00
vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)'
class = multimedia
subclass = video
cxm0@pci0:11:0: class=0x040000 card=0x40090070 chip=0x00164444 rev=0x01 hdr=0x00
vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)'
device = 'iTVC16/CX23416 MPEG Codec'
class = multimedia
subclass = video
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?17318.64217.648153.15652>