From owner-freebsd-questions Fri Nov 22 09:30:48 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id JAA05032 for questions-outgoing; Fri, 22 Nov 1996 09:30:48 -0800 (PST) Received: from mail.hughes.net (mail.hughes.net [205.139.34.24]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id JAA05020 for ; Fri, 22 Nov 1996 09:30:41 -0800 (PST) Received: from trailblazer.com ([205.139.43.19]) by mail.hughes.net (post.office MTA v1.9.3 ID# 0-13727) with SMTP id AAA14849; Fri, 22 Nov 1996 09:30:36 -0800 Received: by trailblazer.com (940816.SGI.8.6.9/930416.SGI) id JAA13067; Fri, 22 Nov 1996 09:32:02 -0800 From: "Jon Morgan" Message-Id: <9611220932.ZM13065@terminus.trailblazer.com> Date: Fri, 22 Nov 1996 09:32:01 -0800 In-Reply-To: Nadav Eiron "Re: atapi cdrom" (Nov 22, 1:55pm) References: X-Mailer: Z-Mail (3.2.0 26oct94 MediaMail) To: freebsd-questions@freebsd.org Subject: Re: atapi cdrom Cc: Nadav Eiron Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Nov 22, 1:55pm, Nadav Eiron wrote: > Subject: Re: atapi cdrom > > > On Thu, 21 Nov 1996, Jon Morgan wrote: > > > I installed 2.1.6-RELEASE from my ide cdrom and now it's no longer functioning. > > It's recognized during probing during bootup, but when I try to mount > > a cdrom, I get "device not configured". I also tried the install floppy > > with the same results. Any sugestions? > > > First, if you installed from a CD, then it's probably 2.1.5 (AFAIK, 2.1.6 > is not on CDs yet). What you need to do is rebuilde your kernel with the > following two lines in the configuration file: > > options ATAPI > device wcd0 > > You'll also need to do > cd /dev > ./MAKEDEV wcd0 > > as root. Look in the Handbook about how to rebuild the kernel. > > Nadav >-- End of excerpt from Nadav Eiron I created the CD myself from the 2.1.6 distribution at ftp.freebsd.org. all these options are in the kernel. The kernel recognizes the cdrom drive during boot. But it says "device not configured" when I try to mount.