Date: Thu, 04 Dec 2008 02:35:06 +0100 From: Hilko Meyer <Hilko.Meyer@gmx.de> To: Hilko Meyer <Hilko.Meyer@gmx.de> Cc: adnan@hochpass.uni-hannover.de, Ulf Lilleengen <lulf@stud.ntnu.no>, freebsd-geom@freebsd.org Subject: Re: System freeze with gvinum Message-ID: <dhcej412gmsj4ele6750i7c1l1l4vl8u60@mail.gmx.net> In-Reply-To: <des5j4pqfbceh1hg4ad26arivjdmcqvr7m@mail.gmx.net> References: <fmg3j4lkbngkmcm41lvbrjvuj2o4iagcvb@4ax.com> <20081130153558.GA2120@nobby.lan> <des5j4pqfbceh1hg4ad26arivjdmcqvr7m@mail.gmx.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hilko Meyer schrieb: >Ulf Lilleengen schrieb: >>On Sat, Nov 29, 2008 at 11:47:59PM +0100, Hilko Meyer wrote: >>> Involved hardware: >>> atapci0: <nVidia nForce MCP65 UDMA133 controller> >>> ad4: 476940MB <Seagate ST3500320NS SN05> at ata2-master UDMA33 >>> ad5: 476940MB <Seagate ST3500320NS SN05> at ata2-slave UDMA33 >>> ad6: 476940MB <Seagate ST3500320NS SN05> at ata3-master UDMA33 >>>=20 >>> BTW: That are SATA-disks. Why they are reported as UDMA33? >>Seems weird. Maybe there are some bios settings turning of AHCI-mode? > >Ah, I think I know were to look for that. I'll try tomorrow. Done, now it looks like that: | atapci1: <nVidia AHCI controller> port = 0xf80-0xf87,0xf00-0xf03,0xe80-0xe87,0xe00-0xe03,0xb800-0xb80f mem = 0xfcffc000-0xfcffdfff irq 20 at device 10.0 on pci0 | atapci1: AHCI Version 01.10 controller with 4 ports detected | ad4: 476940MB <Seagate ST3500320NS SN05> at ata2-master SATA300 | ad6: 476940MB <Seagate ST3500320NS SN05> at ata3-master SATA300 | ad8: 476940MB <Seagate ST3500320NS SN05> at ata4-master SATA300 Just for the record: Board is a K9N Neo V3 with nforce 560 chipset. Changing this BIOS-setting does the trick: Integrated Periphals -> On-Chip ATA Devices: RAID mode [AHCI] "RAID mode" is a verry clever name for that setting... thanks, Hilko
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?dhcej412gmsj4ele6750i7c1l1l4vl8u60>