From owner-freebsd-questions Tue Jun 9 09:54:49 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA10769 for freebsd-questions-outgoing; Tue, 9 Jun 1998 09:54:49 -0700 (PDT) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from laf.cioe.com (laf.cioe.com [204.120.165.33]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA10690 for ; Tue, 9 Jun 1998 09:54:32 -0700 (PDT) (envelope-from steve@laf.cioe.com) Received: (from steve@localhost) by laf.cioe.com (8.8.8/8.8.5) id LAA00872 for freebsd-questions@freebsd.org; Tue, 9 Jun 1998 11:54:21 -0500 (EST) Date: Tue, 9 Jun 1998 11:54:21 -0500 (EST) From: Steve Ames Message-Id: <199806091654.LAA00872@laf.cioe.com> To: freebsd-questions@FreeBSD.ORG Subject: Pioneer cd-rom changer? Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I just plugged a pionner cd-rom changer into an adaptec 2940 controller under FreeBSD 2.2.6-STABLE. Upon reboot the device is probed and the following shows up: ahc0 rev 0 int a irq 11 on pci0:9:0 ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle (ahc0:2:0): "EXABYTE EXB-82058VQANXR1 0790" type 1 removable SCSI 2 st0(ahc0:2:0): Sequential-Access density code 0x0, drive empty (ahc0:3:0): "PIONEER CD-ROM DRM-602X 2902" type 5 removable SCSI 2 cd0(ahc0:3:0): CD-ROM can't get the size (ahc0:3:1): "PIONEER CD-ROM DRM-602X 2902" type 5 removable SCSI 2 cd1(ahc0:3:1): CD-ROM can't get the size [ REPEATED for 'cd2' - 'cd5' ] In my mind this means I should just be able to mount /dev/cd0a to a mount point and life is good... other than that 'can't get the size' error. However whenever I try this I get a 'MEDIUM NOT PRESENT' error. There are CDs in every slot. Any ideas what went wrong here? My kernel supports CD9660 format and has device cd0 enabled. Hrm... -Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message