Date: Fri, 5 Jul 2002 09:05:36 +0200 (CEST) From: Martin Heinen <martin@sumuk.de> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/40213: 4-STABLE kernel crashes with SMP and ahc enabled Message-ID: <200207050705.g6575a6b022460@Abel.sumuk.de>
next in thread | raw e-mail | index | archive | help
>Number: 40213 >Category: i386 >Synopsis: 4-STABLE kernel crashes with SMP and ahc enabled >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jul 05 00:10:01 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Martin Heinen >Release: FreeBSD 4.6-STABLE i386 >Organization: >Environment: System: FreeBSD Abel.sumuk.de 4.6-STABLE FreeBSD 4.6-STABLE #0: Wed Jul 3 10:12:07 CEST 2002 toor@Abel.sumuk.de:/usr/obj/usr/src/sys/ABEL i386 Board: Asus P2B-DS ACPI BIOS Rev. 1012B SCSI Controller: AIC 7890 BIOS 2.2 >Description: During boot the system hangs when probing for SCSI devices. It continues to probe for SCSI devices for at least half an hour. The system boots without problems when SMP support is disabled in the kernel configuration. >How-To-Repeat: Kernel configuration (derived from GENERIC, others fail as well): # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.43 2002/05/23 17:04:01 obrien Exp $ machine i386 cpu I586_CPU cpu I686_CPU ident GENERIC maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device dpt # DPT Smartcache - See LINT for options! device iir # Intel Integrated RAID device mly # Mylex AcceleRAID/eXtremeRAID device ciss # Compaq SmartRAID 5* series # RAID controllers device aac # Adaptec FSA RAID, Dell PERC2/PERC3 device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device amr # AMI MegaRAID device mlx # Mylex DAC960 family device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') device bge # Broadcom BCM570x (``Tigon III'') # ISA Ethernet NICs. # 'device ed' requires 'device miibus' device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? port 0x300 # Xircom Ethernet device xe # PRISM I IEEE 802.11b wireless NIC. device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet verbose boot output: Console: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS drive D: is disk2 BIOS drive E: is disk3 BIOS 639kB/261108kB available memory FreeBSD/i386 bootstrap loader, Revision 0.8 (toor@Abel.sumuk.de, Wed Jul 3 10:03:51 CEST 2002) |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Loading /boot/defaults/loader.conf \|/-\|/-\|/-\|/-\|/-\Warning: unable to open file /boot/loader.conf.local |/-\|/-Warning: unable to open file /boot/nextboot.conf \|/-\|/-\|/-\|/-\|/-\|/-\|/-\/kernel text=0x2d0ab5 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|data=0x47720+0x416f4 /-\|/-\|/-\|/-\|/-\syms=[0x4+0x3ed10|/-\|/-\|/-\|/-+0x4+0x451a1\|/-\|/-\|/-\|/-\|] userconfig_script.../-\|/-\|/-\|/ok Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [kernel] in 7 seconds... Booting [kernel] in 6 seconds... Booting [kernel]... -\|/-\|SMAP type=01 base=00000000 00000000 len=00000000 0009fc00 SMAP type=02 base=00000000 0009fc00 len=00000000 00000400 SMAP type=02 base=00000000 000f0000 len=00000000 00010000 SMAP type=01 base=00000000 00100000 len=00000000 0fefd000 SMAP type=03 base=00000000 0fffd000 len=00000000 00002000 SMAP type=04 base=00000000 0ffff000 len=00000000 00001000 SMAP type=02 base=00000000 fec00000 len=00000000 00001000 SMAP type=02 base=00000000 fee00000 len=00000000 00001000 SMAP type=02 base=00000000 ffff0000 len=00000000 00010000 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-STABLE #0: Thu Jul 4 23:58:31 CEST 2002 toor@Goliath.earth.sol:/usr/obj/usr/src/sys/GENSMP Calibrating clock(s) ... TSC clock: 350773841 Hz, i8254 clock: 1193108 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 268423168 (262132K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0050a000 - 0x0fff4fff, 263106560 bytes (64235 pages) config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di cs0 config> di bt0 config> di adv0 config> q fb: new array size 4 avail memory = 256208896 (250204K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 IOAPIC #0 intpin 16 -> irq 11 IOAPIC #0 intpin 17 -> irq 10 IOAPIC #0 intpin 18 -> irq 9 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 bios32: Found BIOS32 Service Directory header at 0xc00f9ed0 bios32: Entry = 0xf0530 (c00f0530) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x730 pnpbios: Found PnP BIOS data at 0xc00fd320 pnpbios: Entry = f0000:d350 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f8150 Preloaded elf kernel "kernel" at 0xc04e0000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc04e009c. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) Using $PIR table, 7 entries at 0xc00f0d20 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e4000000, size 26 found-> vendor=0x8086, dev=0x7191, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000d800, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=255 map[20]: type 1, range 32, base 0000d400, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000e800, size 4 found-> vendor=0x9005, dev=0x001f, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 0000d000, size 8 map[14]: type 1, range 64, base e1000000, size 12 found-> vendor=0x10ec, dev=0x8139, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 0000b800, size 8 map[14]: type 1, range 32, base e0800000, size 8 found-> vendor=0x10ec, dev=0x8029, revid=0x00 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 0000b400, size 5 found-> vendor=0x9004, dev=0x5078, revid=0x03 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000b000, size 8 map[14]: type 1, range 32, base e0000000, size 12 found-> vendor=0x1409, dev=0x7168, revid=0x01 class=07-00-02, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000a800, size 5 map[14]: type 1, range 32, base 0000a400, size 4 pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x102b, dev=0x0521, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base e3000000, size 24 map[14]: type 1, range 32, base e2000000, size 14 map[18]: type 1, range 32, base e1800000, size 23 pci1: <PCI bus> on pcib1 pci1: <Matrox MGA G200 AGP graphics accelerator> (vendor=0x102b, dev=0x0521) at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 50 50 ata0-slave: ATAPI 50 50 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 50 50 ata0-slave: ATA 50 50 ata0: devices=00 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808 ata1: mask=01 ostat0=50 ostat2=ff ata1-master: ATAPI 14 eb ata1: mask=01 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f at device 4.2 on pci0 pci_cfgintr_search: linked (63) to configured irq 9 at 0:10:0 pci_cfgintr: 0:4 INTD routed to irq 9 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Timecounter "PIIX" frequency 3579545 Hz chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xe1000000-0xe1000fff irq 9 at device 6.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 422 instructions downloaded using shared irq9. aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xe0800000-0xe08000ff irq 9 at device 9.0 on pci0 rl0: Ethernet address: 00:48:54:57:06:39 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl0 attached ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xb400-0xb41f irq 9 at device 10.0 on pci0 bpf: ed0 attached ed0: address 00:00:e8:68:8f:29, type NE2000 (16 bit) ahc1: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xb000-0xb0ff mem 0xe0000000-0xe0000fff irq 10 at device 11.0 on pci0 ahc1: No SEEPROM available. ahc1: Host Adapter Bios disabled. Using default SCSI device parameters ahc1: Downloading Sequencer Program... 447 instructions downloaded aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs pci0: <unknown card> (vendor=0x1409, dev=0x7168) at 12.0 irq 11 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number ed-: ed0 exists, using next available unit number Trying Read_Port at 203 CTL0001: start dependant CTL0001: adding irq mask 0x20 CTL0001: adding dma mask 0x2 CTL0001: adding dma mask 0x20 CTL0001: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0001: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0001: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0001: start dependant CTL0001: adding irq mask 0x6a0 CTL0001: adding dma mask 0xa CTL0001: adding dma mask 0xa0 CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0001: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0001: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0001: start dependant CTL0001: adding irq mask 0x6a0 CTL0001: adding dma mask 0xa CTL0001: adding dma mask 0xa0 CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0001: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0001: start dependant CTL0001: adding irq mask 0x6a0 CTL0001: adding dma mask 0xa CTL0001: adding dma mask 0xa0 CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0001: start dependant CTL0001: adding irq mask 0x6a0 CTL0001: adding dma mask 0xa CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0001: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0001: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0001: start dependant CTL0001: adding irq mask 0x6a0 CTL0001: adding dma mask 0xa CTL0001: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0001: end dependant CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0: not probed (disabled) bt0: not probed (disabled) aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 90 03 3c psm: status 90 03 3c psm: status 90 03 3c psm: data 08 00 00 psm: status 00 00 3c psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed1 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Failing probe. unknown: <Audio> failed to probe at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 adv1: Invalid baseport of 0x200 specified. Nearest valid baseport is 0x210. Failing probe. unknown: <Game> failed to probe at port 0x200-0x20f on isa0 SMP: enabled INTs: 1, 3, 4, 6, 7, 9, 10, 12, 14, 15, apic_imen: 0x00ff2925 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:022afe3f 0..554=555 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 bpf: ppp0 attached new masks: bio 6800c240, tty 6300109a, net 6700129a bpf: sl0 attached bpf: faith0 attached bpf: lo0 attached ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff acd0: <CD-532E-A/1.0A> CDROM drive at ata1 as master acd0: read 5512KB/s (3271KB/s), 128KB buffer, PIO4 acd0: Reads: CD-DA stream acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. ahc0: Timedout SCB already complete. Interrupts may not be functioning. (probe1:ahc0:0:1:0): SCB 0x8 - timed out ahc0: Dumping Card State while idle, at SEQADDR 0x18 ACCUM = 0x8, SINDEX = 0x48, DINDEX = 0xe4, ARG_2 = 0x2 HCNT = 0x0 SCBPTR = 0x0 SCSISEQ = 0x5a, SBLKCTL = 0xa DFCNTRL = 0x0, DFSTATUS = 0x89 LASTPHASE = 0x1, SCSISIGI = 0x18, SXFRCTL0 = 0x80 SSTAT0 = 0x10, SSTAT1 = 0x0 STACK == 0x17, 0x17b, 0x0, 0x0 SCB count = 20 Kernel NEXTQSCB = 14 Card NEXTQSCB = 7 QINFIFO entries: 7 6 5 4 3 2 1 0 19 18 17 16 15 Waiting Queue entries: 0:8 Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 0(c 0x0, s 0x17, l 0, t 0x8) 1(c 0x0, s 0xe7, l 0, t 0xff) 2(c 0x0, s 0xe7, l 0, t 0xff) 3(c 0x0, s 0xe7, l 0, t 0xff) 4(c 0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0xe7, l 0, t 0xff) 6(c 0x0, s 0xe7, l 0, t 0xff) 7(c 0x0, s 0xe7, l 0, t 0xff) 8(c 0x0, s 0xe7, l 0, t 0xff) 9(c 0x0, s 0xe7, l 0, t 0xff) 10(c 0x0, s 0xe7, l 0, t 0xff) 11(c 0x0, s 0xe7, l 0, t 0xff) 12(c 0x0, s 0xe7, l 0, t 0xff) 13(c 0x0, s 0xe7, l 0, t 0xff) 14(c 0x0, s 0xe7, l 0, t 0xff) 15(c 0x0, s 0xe7, l 0, t 0xff) 16(c 0x0, s 0xe7, l 0, t 0xff) 17(c 0x0, s 0xe7, l 0, t 0xff) 18(c 0x0, s 0xe7, l 0, t 0xff) 19(c 0x0, s 0xe7, l 0, t 0xff) 20(c 0x0, s 0xe7, l 0, t 0xff) 21(c 0x0, s 0xe7, l 0, t 0xff) 22(c 0x0, s 0xe7, l 0, t 0xff) 23(c 0x0, s 0xe7, l 0, t 0xff) 24(c 0x0, s 0xe7, l 0, t 0xff) 25(c 0x0, s 0xe7, l 0, t 0xff) 26(c 0x0, s 0xe7, l 0, t 0xff) 27(c 0x0, s 0xe7, l 0, t 0xff) 28(c 0x0, s 0xe7, l 0, t 0xff) 29(c 0x0, s 0xe7, l 0, t 0xff) 30(c 0x0, s 0xe7, l 0, t 0xff) 31(c 0x0, s 0xe7, l ! 0, t 0xff) Pending list: 15(c 0x0, s 0xf7, l 0), 16(c 0x0, s 0xe7, l 0), 17(c 0x0, s 0xd7, l 0), 18(c 0x0, s 0xc7, l 0), 19(c 0x0, s 0xb7, l 0), 0(c 0x0, s 0xa7, l 0), 1(c 0x0, s 0x97, l 0), 2(c 0x0, s 0x87, l 0), 3(c 0x0, s 0x67, l 0), 4(c 0x0, s 0x57, l 0), 5(c 0x0, s 0x47, l 0), 6(c 0x0, s 0x37, l 0), 7(c 0x8, s 0x27, l 0), 8(c 0x0, s 0x17, l 0) Kernel Free SCB list: 9 13 12 11 10 Untagged Q(1): 8 Untagged Q(2): 7 Untagged Q(3): 6 Untagged Q(4): 5 Untagged Q(5): 4 Untagged Q(6): 3 Untagged Q(8): 2 Untagged Q(9): 1 Untagged Q(10): 0 Untagged Q(11): 19 Untagged Q(12): 18 Untagged Q(13): 17 Untagged Q(14): 16 Untagged Q(15): 15 sg[0] - Addr 0xf7cae84 : Length 36 (probe1:ahc0:0:1:0): SCB 8: Immediate reset. Flags = 0x6020 (probe1:ahc0:0:1:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 14 SCBs aborted ahc0: Timedout SCB already complete. Interrupts may not be functioning. (probe4:ahc0:0:4:0): SCB 0xf - timed out ahc0: Dumping Card State while idle, at SEQADDR 0x18 ACCUM = 0xf, SINDEX = 0x48, DINDEX = 0xe4, ARG_2 = 0x3 HCNT = 0x0 SCBPTR = 0x0 SCSISEQ = 0x5a, SBLKCTL = 0xa DFCNTRL = 0x0, DFSTATUS = 0x89 LASTPHASE = 0x1, SCSISIGI = 0xb6, SXFRCTL0 = 0x80 SSTAT0 = 0x40, SSTAT1 = 0x13 STACK == 0x17, 0x17b, 0x165, 0x0 SCB count = 20 Kernel NEXTQSCB = 8 Card NEXTQSCB = 16 QINFIFO entries: 16 17 18 19 0 1 2 3 4 5 6 7 Waiting Queue entries: 0:15 Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 0(c 0x0, s 0x47, l 0, t 0xf) 1(c 0x0, s 0xe7, l 0, t 0xff) 2(c 0x0, s 0xe7, l 0, t 0xff) 3(c 0x0, s 0xe7, l 0, t 0xff) 4(c 0x0, s 0x0, l 0, t 0xff) 5(c 0x0, s 0xe7, l 0, t 0xff) 6(c 0x0, s 0xe7, l 0, t 0xff) 7(c 0x0, s 0xe7, l 0, t 0xff) 8(c 0x0, s 0xe7, l 0, t 0xff) 9(c 0x0, s 0xe7, l 0, t 0xff) 10(c 0x0, s 0xe7, l 0, t 0xff) 11(c 0x0, s 0xe7, l 0, t 0xff) 12(c 0x0, s 0xe7, l 0, t 0xff) 13(c 0x0, s 0xe7, l 0, t 0xff) 14(c 0x0, s 0xe7, l 0, t 0xff) 15(c 0x0, s 0xe7, l 0, t 0xff) 16(c 0x0, s 0xe7, l 0, t 0xff) 17(c 0x0, s 0xe7, l 0, t 0xff) 18(c 0x0, s 0xe7, l 0, t 0xff) 19(c 0x0, s 0xe7, l 0, t 0xff) 20(c 0x0, s 0xe7, l 0, t 0xff) 21(c 0x0, s 0xe7, l 0, t 0xff) 22(c 0x0, s 0xe7, l 0, t 0xff) 23(c 0x0, s 0xe7, l 0, t 0xff) 24(c 0x0, s 0xe7, l 0, t 0xff) 25(c 0x0, s 0xe7, l 0, t 0xff) 26(c 0x0, s 0xe7, l 0, t 0xff) 27(c 0x0, s 0xe7, l 0, t 0xff) 28(c 0x0, s 0xe7, l 0, t 0xff) 29(c 0x0, s 0xe7, l 0, t 0xff) 30(c 0x0, s 0xe7, l 0, t 0xff) 31(c 0x0, s 0xe7, l ! 0, t 0xff) Pending list: 7(c 0x8, s 0x27, l 0), 6(c 0x0, s 0x17, l 0), 5(c 0x0, s 0xf7, l 0), 4(c 0x0, s 0xe7, l 0), 3(c 0x0, s 0xd7, l 0), 2(c 0x0, s 0xc7, l 0), 1(c 0x0, s 0xb7, l 0), 0(c 0x0, s 0xa7, l 0), 19(c 0x0, s 0x97, l 0), 18(c 0x0, s 0x87, l 0), 17(c 0x0, s 0x67, l 0), 16(c 0x0, s 0x57, l 0), 15(c 0x0, s 0x47, l 0) Kernel Free SCB list: 14 9 13 12 11 10 Untagged Q(1): 6 Untagged Q(2): 7 Untagged Q(4): 15 Untagged Q(5): 16 Untagged Q(6): 17 Untagged Q(8): 18 Untagged Q(9): 19 Untagged Q(10): 0 Untagged Q(11): 1 Untagged Q(12): 2 Untagged Q(13): 3 Untagged Q(14): 4 Untagged Q(15): 5 sg[0] - Addr 0xf7ca884 : Length 36 (probe4:ahc0:0:4:0): SCB 15: Immediate reset. Flags = 0x6020 (probe4:ahc0:0:4:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 13 SCBs aborted >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207050705.g6575a6b022460>