Date: Tue, 26 Sep 2000 20:41:06 -0600 From: "Bert Hiddink" <hiddink@galileo.or.cr> To: Greg Lehey <grog@lemis.com> Cc: questions@FreeBSD.ORG, Taku YAMAMOTO <taku@cent.saitama-u.ac.jp> Subject: Re: ESS Maestro-1/2/2E driver for FreeBSD 4.1 release Message-ID: <20000927024015.414AA37B423@hub.freebsd.org> In-Reply-To: <20000927110658.A7058@sydney.worldwide.lemis.com> References: <20000926022349.91C4C37B422@hub.freebsd.org>; from hiddink@galileo.or.cr on Mon, Sep 25, 2000 at 08:31:32PM -0600
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Grey, Thanks for your message. Concerning: El 27 Sep 00, a las 11:06, Greg Lehey escrib=F3: >> On Monday, 25 September 2000 at 20:31:32 -0600, Bert Hiddink wrote: >> > Hello, >> > >> > In order to get some sound of my Toshiba 2595 CDS, I tried to configu= re ESS Maestro-1/2/2E driver >> > for FreeBSD 4.1 release. >> > >> > I saw from: >> > http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/newpcm/readm= e.html >> > ... so I did: >> > >> > - Downloaded http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro= /newpcm/20000906.tar.gz >> > and did a =B4untar=B4, =B4make=B4 and =B4make install=B4 >> > - Added to /boot/loader.conf: maestro_load=3D"YES" >> > - Added =B4device pcm=B4 to my ..conf/CUSTOM >> > - Added =B4options DEVFS=B4 to my ..conf/CUSTOM >> > - Rebuild the CUSTOM kernel: seemed to work out OK (YES!!!) >> > - When I do =B4dmesg | grep pcm=B4 >> > I see: >> > pcm0: <ESS Technology Maestro-2> port...on pci0 >> >> This isn't enough. I'm currently chasing a similar problem on a >> machine where sound used to work, and now doesn't. I would get a >> similar message with this method, but what I see in dmesg is in fact: >> >> pcm0: <CS4236> at port 0x52c-0x533 irq 10 drq 1 flags 0xa100 on isa0 >> device_probe_and_attach: pcm0 attach returned 6 >> >> See that second line? Error 6 is "device not configured" (look in >> /usr/include/sys/errno.h for the error numbers). The second line does not appear in my case, only the first line (very simi= lar). >> > - Finally, I do in /dev =B4./MAKEDEV snd0=B4 >> > >> > ...all the above seems OK but when I call xcdplayer in X-windows, I >> > get "Device not configured=A8... and I am still without music! >> > >> > Did I overlook something? Did someone get this driver work with >> > FreeBSD? >> >> Others have reported success. At this point, I do not have a clear understanding of what MAKEDEV should = do. I suppose it should create or activate in one way or the other the device snd0 (in my case). However, when I take a close look at /dev/ after I ran './MAKEDEV snd0', I= conclude that there is no file or device called 'snd0'. I hope this info helps to make you see wh= ere I need some more help! Thanks again! Regards, -brt Bert Hiddink, FUNDACION GALILEO Correo electronico: hiddink@galileo.or.cr Sitio: http://www.galileo.or.cr Tel. (506) 280 8683, telefax. (506) 280 8847 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000927024015.414AA37B423>