Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 2 Nov 2004 16:21:46 +0200
From:      Dan Cojocar <dan.cojocar@gmail.com>
To:        Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw>
Cc:        freebsd-current@freebsd.org
Subject:   Re: -CURRENT booting locks up during EHCI detection
Message-ID:  <b37cb09704110206215b0be5cc@mail.gmail.com>
In-Reply-To: <0410282203035.15747@www.mmlab.cse.yzu.edu.tw>
References:  <0410282203035.15747@www.mmlab.cse.yzu.edu.tw>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 28 Oct 2004 22:04:03 +0800 (CST), Tai-hwa Liang
<avatar@mmlab.cse.yzu.edu.tw> wrote:
> Motherboard: MSI 865PE Neo2
> -CURRENT cvsup'ed about 3 days ago, SCHED_4BSD, no PREEMPTION.
> 
>    Sometime it froze during boot(see following dmesg for the freeze point),
> right after ehci0 was deteceted: No panic, hard lock up, manually escape
> to debugger doesn't work since the keyboard doesn't respond anymore.
> 
>    Following are the verbose booting message while successful booting.
> Search for "freeze" to locate the freeze point.
> 
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-CURRENT #0: Mon Oct 25 17:26:21 CST 2004
>      root@bsd.ethome.com.tw:/usr/src/sys/i386/compile/bsd
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc07e6000.
> Preloaded splash_image_data "/boot/chuck1.bmp" at 0xc07e626c.
> Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc07e62bc.
> Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07e6368.
> Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc07e6414.
> Preloaded elf module "/boot/kernel/sound.ko" at 0xc07e64c0.
> Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc07e656c.
> Preloaded elf module "/boot/kernel/usb.ko" at 0xc07e6618.
> Preloaded elf module "/boot/kernel/ums.ko" at 0xc07e66c0.
> Preloaded elf module "/boot/kernel/umass.ko" at 0xc07e6768.
> Preloaded elf module "/boot/kernel/agp.ko" at 0xc07e6814.
> Table 'FACP' at 0x1fff0030
> Table 'APIC' at 0x1fff00c0
> MADT: Found table at 0x1fff00c0
> MP Configuration Table version 1.4 found at 0xc00f60d0
> APIC: Using the MADT enumerator.
> MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
> SMP: Added CPU 0 (AP)
> MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
> SMP: Added CPU 1 (AP)
> ACPI APIC Table: <AMIINT INTEL865>
> Calibrating clock(s) ... i8254 clock: 1193207 Hz
> Timecounter "i8254" frequency 1193207 Hz quality 0
> Calibrating TSC clock ... TSC clock: 2434149468 Hz
> CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2434.15-MHz 686-class CPU)
>    Origin = "GenuineIntel"  Id = 0xf25  Stepping = 5
>    Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>    Hyperthreading: 2 logical CPUs
> real memory  = 536805376 (511 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000829000 - 0x000000001f6b3fff, 518565888 bytes (126603 pages)
> avail memory = 519737344 (495 MB)
> APIC ID: physical 0, logical 0:0
> APIC ID: physical 1, logical 0:1
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>   cpu0 (BSP): APIC ID:  0
>   cpu1 (AP): APIC ID:  1
> bios32: Found BIOS32 Service Directory header at 0xc00fdb50
> bios32: Entry = 0xfdb60 (c00fdb60)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xdb81
> pnpbios: Found PnP BIOS data at 0xc00f7540
> pnpbios: Entry = f0000:632f  Rev = 1.0
> Other BIOS signatures found:
> APIC: CPU 0 has ACPI ID 1
> APIC: CPU 1 has ACPI ID 2
> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
> ioapic0: Routing external 8259A's -> intpin 0
> ioapic0: intpin 0 -> ExtINT (edge, high)
> ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
> ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
> ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
> ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
> ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
> ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
> ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
> ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
> ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
> ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
> ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
> ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
> ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
> ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
> ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
> ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
> ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
> ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
> ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
> ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
> ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
> ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
> ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
> MADT: intr override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> ioapic0: intpin 2 trigger: edge
> ioapic0: intpin 2 polarity: high
> MADT: intr override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> ioapic0: intpin 9 polarity: high
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> cpu0 BSP:
>       ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
>    lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> random: <entropy source, Software, Yarrow>
> io: <I/O>
> mem: <memory>
> Pentium Pro MTRR support enabled
> null: <null device, zero device>
> acpi0: <AMIINT INTEL865> on motherboard
> acpi0: [MPSAFE]
> pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000090
> pci_open(1a):   mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=25708086)
> pcibios: BIOS version 2.10
> Found $PIR table, 14 entries at 0xc00f7b70
> PCI-Only Interrupts: none
> Location  Bus Device Pin  Link  IRQs
> embedded    0    1    A   0x60  3 4 6 7 10 11 12 14 15
> embedded    0    1    B   0x61  3 4 6 7 10 11 12 14 15
> embedded    0    2    A   0x60  3 4 6 7 10 11 12 14 15
> embedded    0    3    B   0x62  3 4 6 7 10 11 12 14 15
> embedded    0   29    A   0x60  3 4 6 7 10 11 12 14 15
> embedded    0   29    B   0x63  3 4 6 7 10 11 12 14 15
> embedded    0   29    C   0x62  3 4 6 7 10 11 12 14 15
> embedded    0   29    D   0x6b  3 4 5 6 7 12 14 15
> embedded    0   31    A   0x62  3 4 6 7 10 11 12 14 15
> embedded    0   31    B   0x61  3 4 6 7 10 11 12 14 15
> slot 1      2    0    A   0x60  3 4 6 7 10 11 12 14 15
> slot 1      2    0    B   0x61  3 4 6 7 10 11 12 14 15
> slot 1      2    0    C   0x62  3 4 6 7 10 11 12 14 15
> slot 1      2    0    D   0x63  3 4 6 7 10 11 12 14 15
> slot 2      2    1    A   0x61  3 4 6 7 10 11 12 14 15
> slot 2      2    1    B   0x62  3 4 6 7 10 11 12 14 15
> slot 2      2    1    C   0x63  3 4 6 7 10 11 12 14 15
> slot 2      2    1    D   0x60  3 4 6 7 10 11 12 14 15
> slot 3      2    2    A   0x62  3 4 6 7 10 11 12 14 15
> slot 3      2    2    B   0x63  3 4 6 7 10 11 12 14 15
> slot 3      2    2    C   0x60  3 4 6 7 10 11 12 14 15
> slot 3      2    2    D   0x61  3 4 6 7 10 11 12 14 15
> slot 4      2    3    A   0x63  3 4 6 7 10 11 12 14 15
> slot 4      2    3    B   0x60  3 4 6 7 10 11 12 14 15
> slot 4      2    3    C   0x61  3 4 6 7 10 11 12 14 15
> slot 4      2    3    D   0x62  3 4 6 7 10 11 12 14 15
> slot 5      2    5    A   0x61  3 4 6 7 10 11 12 14 15
> slot 5      2    5    B   0x62  3 4 6 7 10 11 12 14 15
> slot 5      2    5    C   0x63  3 4 6 7 10 11 12 14 15
> slot 5      2    5    D   0x60  3 4 6 7 10 11 12 14 15
> slot 6      2    4    A   0x60  3 4 6 7 10 11 12 14 15
> slot 6      2    4    B   0x61  3 4 6 7 10 11 12 14 15
> slot 6      2    4    C   0x62  3 4 6 7 10 11 12 14 15
> slot 6      2    4    D   0x63  3 4 6 7 10 11 12 14 15
> embedded    2    9    A   0x68  3 4 6 7 10 11 12 14 15
> embedded    2    9    B   0x69  3 4 6 7 10 11 12 14 15
> embedded    2    9    C   0x6a  3 4 6 7 10 11 12 14 15
> embedded    2    9    D   0x6b  3 4 5 6 7 12 14 15
> embedded    2   10    A   0x69  3 4 6 7 10 11 12 14 15
> embedded    2    8    A   0x68  3 4 6 7 10 11 12 14 15
> AcpiOsDerivePciId: bus 0 dev 31 func 0
> AcpiOsDerivePciId: bus 0 dev 31 func 0
> acpi0: Power Button (fixed)
> AcpiOsDerivePciId: bus 0 dev 0 func 0
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> ACPI timer looks GOOD min = 3, max = 4, width = 1
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> ACPI timer looks GOOD min = 3, max = 3, width = 0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> unknown: not probed (disabled)
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu1: Failed to attach throttling P_CNT
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> ACPI PCI link initial configuration:
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
>         map[10]: type 3, range 32, base f8000000, size 26, enabled
> found-> vendor=0x8086, dev=0x2570, revid=0x02
>         bus=0, slot=0, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2571, revid=0x02
>         bus=0, slot=1, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
>         lattimer=0x20 (960 ns), mingnt=0x0d (3250 ns), maxlat=0x00 (0 ns)
>         map[20]: type 4, range 32, base 0000e000, size  5, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x24d2, revid=0x02
>         bus=0, slot=29, func=0
>         class=0c-03-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=16
>         map[20]: type 4, range 32, base 0000e400, size  5, enabled
> pcib0: matched entry for 0.29.INTB
> pcib0: slot 29 INTB hardwired to IRQ 19
> found-> vendor=0x8086, dev=0x24d4, revid=0x02
>         bus=0, slot=29, func=1
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=19
>         map[20]: type 4, range 32, base 0000e800, size  5, enabled
> pcib0: matched entry for 0.29.INTC
> pcib0: slot 29 INTC hardwired to IRQ 18
> found-> vendor=0x8086, dev=0x24d7, revid=0x02
>         bus=0, slot=29, func=2
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=c, irq=18
>         map[20]: type 4, range 32, base 0000ec00, size  5, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 16
> found-> vendor=0x8086, dev=0x24de, revid=0x02
>         bus=0, slot=29, func=3
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=16
>         map[10]: type 1, range 32, base febffc00, size 10, enabled
> pcib0: matched entry for 0.29.INTD
> pcib0: slot 29 INTD hardwired to IRQ 23
> found-> vendor=0x8086, dev=0x24dd, revid=0x02
>         bus=0, slot=29, func=7
>         class=0c-03-20, hdrtype=0x00, mfdev=0
>         cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=d, irq=23
>         powerspec 2  supports D0 D3  current D0
> found-> vendor=0x8086, dev=0x244e, revid=0xc2
>         bus=0, slot=30, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x24d0, revid=0x02
>         bus=0, slot=31, func=0
>         class=06-01-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         map[20]: type 4, range 32, base 0000fc00, size  4, enabled
> found-> vendor=0x8086, dev=0x24db, revid=0x02
>         bus=0, slot=31, func=1
>         class=01-01-8a, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
>         map[20]: type 4, range 32, base 00000c00, size  5, enabled
> pcib0: matched entry for 0.31.INTB
> pcib0: slot 31 INTB hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x24d3, revid=0x02
>         bus=0, slot=31, func=3
>         class=0c-05-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=17
>         map[10]: type 4, range 32, base 0000dc00, size  8, enabled
>         map[14]: type 4, range 32, base 0000d800, size  6, enabled
>         map[18]: type 1, range 32, base febffa00, size  9, enabled
>         map[1c]: type 1, range 32, base febff900, size  8, enabled
> pcib0: matched entry for 0.31.INTB
> pcib0: slot 31 INTB hardwired to IRQ 17
> found-> vendor=0x8086, dev=0x24d5, revid=0x02
>         bus=0, slot=31, func=5
>         class=04-01-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=17
>         powerspec 2  supports D0 D3  current D0
> agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
> agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
> agp0: allocating GATT for aperture of size 64M
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0xf000-0xfff
> pcib1:   memory decode     0xfc900000-0xfe9fffff
> pcib1:   prefetched decode 0xf3f00000-0xf7efffff
> pci1: <PCI bus> on pcib1
> pci1: physical bus=1
>         map[10]: type 1, range 32, base fd000000, size 24, enabled
> pcib1: device (null) requested decoded memory range 0xfd000000-0xfdffffff
>         map[14]: type 3, range 32, base f4000000, size 25, enabled
> pcib1: device (null) requested decoded memory range 0xf4000000-0xf5ffffff
> pcib0: matched entry for 0.1.INTA
> pcib0: slot 1 INTA hardwired to IRQ 16
> pcib1: slot 0 INTA is routed to irq 16
> found-> vendor=0x10de, dev=0x002d, revid=0x15
>         bus=1, slot=0, func=0
>         class=03-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
>         lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
>         intpin=a, irq=16
>         powerspec 1  supports D0 D3  current D0
> pci1: <display, VGA> at device 0.0 (no driver attached)
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ukbd0: CHESEN USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1
> kbd: new array size 4
> kbd1 at ukbd0
> kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq 19 at device 29.1 on pci0
> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ums0: IBM Corporation product 0x310b, rev 2.00/1.10, addr 3, iclass 3/1
> ums0: 3 buttons and Z dir.
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0
> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0
> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
> uhci3: [GIANT-LOCKED]
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
> 
>                 [ ... freeze here sometimes ... ]
> 
> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebffc00
> ehci0: [GIANT-LOCKED]
> ehci_pci_attach: companion usb0
> ehci_pci_attach: companion usb1
> ehci_pci_attach: companion usb2
> ehci_pci_attach: companion usb3
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pcib2:   secondary bus     2
> pcib2:   subordinate bus   2
> pcib2:   I/O decode        0xc000-0xcfff
> pcib2:   memory decode     0xfea00000-0xfeafffff
> pcib2:   prefetched decode 0xfff00000-0xfffff
> pcib2:   Subtractively decoded bridge.
> ACPI PCI link initial configuration:
> pci2: <ACPI PCI bus> on pcib2
> pci2: physical bus=2
>         map[10]: type 4, range 32, base 0000cc00, size  7, enabled
> pcib2: device (null) requested decoded I/O range 0xcc00-0xcc7f
> pcib2: matched entry for 2.2.INTA
> pcib2: slot 2 INTA hardwired to IRQ 18
> found-> vendor=0x1022, dev=0x2020, revid=0x10
>         bus=2, slot=2, func=0
>         class=01-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords)
>         lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x28 (10000 ns)
>         intpin=a, irq=18
>         map[10]: type 4, range 32, base 0000c800, size  6, enabled
> pcib2: device (null) requested decoded I/O range 0xc800-0xc83f
> pcib2: matched entry for 2.5.INTA
> pcib2: slot 5 INTA hardwired to IRQ 17
> found-> vendor=0x1191, dev=0x8040, revid=0x01
>         bus=2, slot=5, func=0
>         class=01-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>         lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=17
>         powerspec 1  supports D0 D3  current D0
>         map[10]: type 1, range 32, base feaef000, size 12, enabled
> pcib2: device (null) requested decoded memory range 0xfeaef000-0xfeaeffff
>         map[14]: type 4, range 32, base 0000c400, size  6, enabled
> pcib2: device (null) requested decoded I/O range 0xc400-0xc43f
> pcib2: matched entry for 2.8.INTA
> pcib2: slot 8 INTA hardwired to IRQ 20
> found-> vendor=0x8086, dev=0x1050, revid=0x02
>         bus=2, slot=8, func=0
>         class=02-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
>         lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
>         intpin=a, irq=20
>         powerspec 2  supports D0 D1 D2 D3  current D0
> pci2: <mass storage, SCSI> at device 2.0 (no driver attached)
> pci2: <mass storage, SCSI> at device 5.0 (no driver attached)
> fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xc400-0xc43f mem 0xfeaef000-0xfeaeffff irq 20 at device 8.0 on pci2
> fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaef000
> fxp0: using memory space register mapping
> fxp0: PCI IDs: 8086 1050 1462 728c 0002
> fxp0: Dynamic Standby mode is enabled
> miibus0: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: bpf attached
> fxp0: Ethernet address: 00:0c:76:4c:36:02
> fxp0: [MPSAFE]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
> ata0: channel #0 on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=50
> ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
> ata0: [MPSAFE]
> ata1: channel #1 on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
> ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
> ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
> ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
> ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
> ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
> ata1: [MPSAFE]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH5 (82801EB)> port 0xd800-0xd83f,0xdc00-0xdcff mem 0xfebff900-0xfebff9ff,0xfebffa00-0xfebffbff irq 17 at device 31.5 on pci0
> pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xfebffa00
> pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xfebff900
> pcm0: [GIANT-LOCKED]
> pcm0: <C-Media Electronics CMI9739 AC97 Codec (id = 0x434d4961)>
> pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
> pcm0: Primary codec extended features double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4
> pcm0: sndbuf_setmap 1f1af000, 4000; 0xd94f3000 -> 1f1af000
> pcm0: sndbuf_setmap 1f1a4000, 4000; 0xd94f7000 -> 1f1a4000
> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0065
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0065
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3-00, 3 buttons
> psm0: config:00000000, flags:00000008, packet size:4
> psm0: syncmask:08, syncbits:00
> sio0: irq maps: 0xc821 0xc831 0xc821 0xc821
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio1: irq maps: 0xc821 0xc831 0xc821 0xc821
> sio1: <16550A-compatible COM port> port 0x3e8-0x3ef irq 4 on acpi0
> sio1: type 16550A
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> ppc0: using extended I/O port range
> PC873xx probe at 0x2e got unknown ID 0x0
> ppc0: ECP SPP ECP+EPP SPP
> ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> ppc: ppc0 already exists; skipping it
> sio: sio0 already exists; skipping it
> sio: sio1 already exists; skipping it
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROMs> at iomem 0xe0000-0xe0fff,0xc0000-0xcffff on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic1: not probed (disabled)
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0: vga0, vga, type:VGA (5), flags:0x7007f
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> Device configuration finished.
> Timecounter "TSC" frequency 2434149468 Hz quality -100
> Timecounters tick every 10.000 msec
> lo0: bpf attached
> cpu0: set speed to 100.0%
> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
> ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
> ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
> ata0-master: setting PIO4 on Intel ICH5 chip
> ata0-master: setting UDMA100 on Intel ICH5 chip
> ata0-slave: setting PIO4 on Intel ICH5 chip
> ata0-slave: setting UDMA100 on Intel ICH5 chip
> ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-master
> ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, UDMA100
> GEOM: new disk ad0
> [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/1/63 s:63 l:46492047
> [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:46492110 l:13544370
> [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> GEOM: Configure ad0s1, start 32256 length 23803928064 end 23803960319
> GEOM: Configure ad0s2, start 23803960320 length 6934717440 end 30738677759
> ad1: <HDS722516VLAT80/V34OA6EA> ATA-6 disk at ata0-slave
> ad1: 157066MB (321672960 sectors), 319120 C, 16 H, 63 S, 512 B
> ad1: 16 secs/int, 1 depth queue, UDMA100
> ata1-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
> ata1-master: setting PIO4 on Intel ICH5 chip
> ata1-master: setting UDMA66 on Intel ICH5 chip
> acd0: <Pioneer DVD-ROM ATAPIModel DVD-106S 0122/E1.22> DVDROM drive at ata1 as master
> acd0: read 6894KB/s (6894KB/s), 256KB buffer, UDMA66
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
> acd0: Writes:
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> pcm0: measured ac97 link rate at 47996 Hz, will use 48000 Hz
> GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
> GEOM: Configure ad0s2b, start 134217728 length 1073741824 end 1207959551
> GEOM: Configure ad0s2c, start 0 length 6934717440 end 6934717439
> GEOM: Configure ad0s2d, start 1207959552 length 1652555776 end 2860515327
> GEOM: Configure ad0s2e, start 2860515328 length 33554432 end 2894069759
> GEOM: Configure ad0s2f, start 2894069760 length 4040647680 end 6934717439
> GEOM: new disk ad1
> [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:220941882
> [1] f:00 typ:15 s(CHS):1023/0/1 e(CHS):1023/254/63 s:220941945 l:82654425
> [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> GEOM: Configure ad1s1, start 32256 length 113122243584 end 113122275839
> GEOM: Configure ad1s2, start 113122275840 length 42319065600 end 155441341439
> MBREXT Slice 5 on ad1s2:
> [0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:82654362
> [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> GEOM: Configure ad1s5, start 32256 length 42319033344 end 42319065599
> ukbd0: at uhub0 port 1 (addr 2) disconnected
> (null): at uhub1 port 1 (addr 2) disconnected
> ukbd0: detached
> (probe3:ata1:0:1:0): error 22
> (probe3:ata1:0:1:0): Unretryable Error
> (probe3:ata1:0:1:0): error 22
> (probe3:ata1:0:1:0): Unretryable Error
> (probe2:ata1:0:0:0): error 22
> (probe2:ata1:0:0:0): Unretryable Error
> (probe2:ata1:0:0:0): error 6
> (probe2:ata1:0:0:0): Unretryable Error
> (probe2:ata1:0:0:0): error 22
> (probe2:ata1:0:0:0): Unretryable Error
> (probe0:ata0:0:0:0): error 22
> (probe0:ata0:0:0:0): Unretryable Error
> (probe1:ata0:0:1:0): error 22
> (probe1:ata0:0:1:0): Unretryable Error
> (probe0:ata0:0:0:0): error 22
> (probe0:ata0:0:0:0): Unretryable Error
> (probe1:ata0:0:1:0): error 22
> (probe1:ata0:0:1:0): Unretryable Error
> pass0 at ata1 bus 0 target 0 lun 0
> pass0: <PIONEER DVD-ROM DVD-106 1.22> Removable CD-ROM SCSI-0 device
> pass0: 66.000MB/s transfers
> GEOM: new disk cd0
> SMP: AP CPU #1 Launched!
> cpu1 AP:
>       ID: 0x01000000   VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
>    lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
> ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
> ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
> ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
> ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
> ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
> ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
> ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
> ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
> ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
> ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
> ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
> ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
> ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
> ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
> ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
> (cd0:ata1:0:0:0): error 6
> (cd0:ata1:0:0:0): Unretryable Error
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <PIONEER DVD-ROM DVD-106 1.22> Removable CD-ROM SCSI-0 device
> cd0: 66.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> (cd0:ata1:0:0:0): error 6
> (cd0:ata1:0:0:0): Unretryable Error
> (cd0:ata1:0:0:0): error 6
> (cd0:ata1:0:0:0): Unretryable Error
> (cd0:ata1:0:0:0): error 6
> (cd0:ata1:0:0:0): Unretryable Error
> Mounting root from ufs:/dev/ad0s2a
> start_init: trying /sbin/init
> ums0: at uhub1 port 2 (addr 3) disconnected
> ums0: detached
> ukbd0: CHESEN USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1
> kbd1 at ukbd0
> kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
> (null): at uhub0 port 2 (addr 3) disconnected
> Linux ELF exec handler installed
> procfs registered
> linprocfs registered
> ums0: IBM Corporation product 0x310b, rev 2.00/1.10, addr 3, iclass 3/1
> ums0: 3 buttons and Z dir.
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
> 
       Hello,

   I'm getting something similar with GA-7N400E, nForce2 400 chipset.
In 5.3-RC1, i didn't have this problem only after updating to
-current, i disabled loading the usb module and the system is booting
fine, but as soon as i load usb i get this freeze.
   Thanks,
                                                 Dan



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b37cb09704110206215b0be5cc>