Date: Fri, 10 Feb 2006 10:48:55 +0000 (GMT) From: Josef Karthauser <joe@tao.org.uk> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/93125: ath0 times out periodically Message-ID: <20060210104855.93C296134@mailhost.tao.org.uk> Resent-Message-ID: <200602101050.k1AAo3Ur073012@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 93125 >Category: kern >Synopsis: ath0 times out periodically >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Feb 10 10:50:03 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Josef Karthauser >Release: FreeBSD 6.1-PRERELEASE i386 >Organization: >Environment: System: FreeBSD transwarp.tao.org.uk 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #61: Tue Feb 7 09:01:29 GMT 2006 joe@transwarp.tao.org.uk:/usr/obj/usr/src/sys/TRANSWARP i386 /var/run/dmesg.boot: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-PRERELEASE #61: Tue Feb 7 09:01:29 GMT 2006 joe@transwarp.tao.org.uk:/usr/obj/usr/src/sys/TRANSWARP ACPI APIC Table: <Intel N440BX > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (796.54-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536805376 (511 MB) avail memory = 515788800 (491 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 15.0 on pci1 pci2: <PCI bus> on pcib2 ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0x3000-0x30ff mem 0xf4210000-0xf4210fff irq 20 at device 4.0 on pci2 ahc0: [GIANT-LOCKED] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ath0: <Atheros 5212> mem 0xf4200000-0xf420ffff irq 23 at device 7.0 on pci2 ath0: Ethernet address: 00:09:5b:e5:1f:a4 ath0: mac 5.6 phy 4.1 radio 1.7 ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 19 at device 12.0 on pci0 ahc1: [GIANT-LOCKED] aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc2: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 19 at device 12.1 on pci0 ahc2: [GIANT-LOCKED] aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2800-0x283f mem 0xf4102000-0xf4102fff,0xf4000000-0xf40fffff irq 21 at device 14.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:d0:b7:88:c8:20 isab0: <PCI-ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2860-0x286f at device 18.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2840-0x285f irq 21 at device 18.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 18.3 (no driver attached) pci0: <display, VGA> at device 20.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff,0xcd800-0xce7ff,0xce800-0xcefff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 aue0: USBs USB 10/100 Fast Ethernet, rev 1.10/1.01, addr 2 miibus1: <MII bus> on aue0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto aue0: Ethernet address: 00:50:ba:82:4c:24 aue0: if_start running deferred for Giant Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled Waiting 2 seconds for SCSI devices to settle ad0: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata0-master UDMA33 acd0: CDROM <TOSHIBA CD-ROM XM-6702B/1007> at ata1-master UDMA33 sa0 at ahc0 bus 0 target 2 lun 0 sa0: <QUANTUM DLT8000 0250> Removable Sequential Access SCSI-2 device sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit) da1 at ahc1 bus 0 target 1 lun 0 da1: <SEAGATE ST336607LC 0006> Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da0 at ahc1 bus 0 target 0 lun 0 da0: <FUJITSU MAP3367NC 0108> Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 35046MB (71775284 512 byte sectors: 255H 63S/T 4467C) da2 at ahc1 bus 0 target 3 lun 0 da2: <MAXTOR ATLAS10K4_36SCA DFX1> Fixed Direct Access SCSI-3 device da2: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing Enabled da2: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) SMP: AP CPU #1 Launched! GEOM_MIRROR: Device boot0 created (id=3729329917). GEOM_MIRROR: Device boot0: provider da0s1 detected. GEOM_MIRROR: Device boot0: provider da1s1 detected. GEOM_MIRROR: Device boot0: provider da1s1 activated. GEOM_MIRROR: Device boot0: provider mirror/boot0 launched. GEOM_MIRROR: Device boot0: rebuilding provider da0s1. ch0 at ahc0 bus 0 target 0 lun 0 ch0: <ATL P1000 6220050 2.01> Removable Changer SCSI-2 device ch0: 6.600MB/s transfers (16bit) ch0: 30 slots, 1 drive, 1 picker, 1 portal /etc/sysctl.conf: net.link.ether.bridge.enable=1 net.link.ether.bridge.ipfw=1 net.link.ether.bridge.config=aue0,fxp0,ath0 >Description: Periodically the wireless interface gives the error: ath0: device timeout and requires 'ifconfig down ath0; sleep 5; ifconfig up ath0' to get it back into service. >How-To-Repeat: >Fix: No fixes, other than bouncing the interface status with ifconfig. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060210104855.93C296134>