Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 28 Oct 2002 12:16:42 -0500
From:      "James Dean" <freebsdguru@hotmail.com>
To:        freebsd-stable@freebsd.org, freebsd-questions@FreeBSD.ORG
Message-ID:  <F141mGbGxMYqcNkzCV40000eee7@hotmail.com>

next in thread | raw e-mail | index | archive | help
I am running FreeBSD stable and am having issues with my CD-RW drive that I 
didn't before.  I have recently reinstalled, due to QT3/KDE3 issues that I 
just gave up on, but the drive was working fine with burncd and such, but no 
I get errors even trying to mount about the device not being configured.  
There are two drives and in my /dev/ there is an acd0a, acd0c, acd1c but no 
acd1a and when I run ./MAKEDEV acd1a I get an error about a limit of 32 
devices.  The handbook said to add device acd1 and acd0 to the kernel, but 
the build says that acd is an unknown device.  Here are the errors and my 
current kernel files, any help would be great.

./MAKEDEV acd1a
[: 1a: bad number
acd1a is invalid -- can't have more than 32 cd devices

mount -t cd9660 /dev/acd1c /cdrom1
cd9660: /dev/acd1c: Device not configured

burncd -f /dev/acd1c -s 6 data WarLinux-0.5cd.iso fixate
burncd: open(/dev/acd1c): Device not configured

machine         i386
cpu             I686_CPU
ident           BSDGURU
maxusers        32

#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug 
symbols

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep 
this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_DIRHASH             #Improve performance on big 
directories
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS 
required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660 
required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP 
THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
options         CPU_ENABLE_SSE
options         USER_LDT
options         TCP_DROP_SYNFIN
options         EXT2FS                  # Mount linux partition
options         COMPAT_LINUX

# To make an SMP kernel, the next two are needed
#options        SMP                     # Symmetric MultiProcessor Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O

device          isa
device          eisa
device          pci
device          pcm

# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0

# ATA and ATAPI devices
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
options         ATA_STATIC_ID           #Static device numbering

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          cd              # CD

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12

device          vga0    at isa?

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device          apm0    at nexus? disable flags 0x20 # Advanced Power 
Management

# PCCARD (PCMCIA) support
device          card
device          pcic0   at isa? irq 0 port 0x3e0 iomem 0xd0000
device          pcic1   at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          sio2    at isa? disable port IO_COM3 irq 5
device          sio3    at isa? disable port IO_COM4 irq 9

# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da


# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device          ed0     at isa? port 0x280 irq 10 iomem 0xd8000
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device          ie0     at isa? port 0x300 irq 10 iomem 0xd0000
#device         le0     at isa? port 0x300 irq 5 iomem 0xd0000
device          lnc0    at isa? port 0x280 irq 10 drq 0
device          cs0     at isa? port 0x300
device          sn0     at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif             # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)
pseudo-device   snp     10

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          uscanner        # Scanners
device          urio            # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device          aue             # ADMtek USB ethernet
device          cue             # CATC USB ethernet
device          kue             # Kawasaki LSI USB ethernet

The device doesn't work with the GENERIC kernel either.  I am certian the 
drive is functional, and just can't figure out what is wrong with the acd1a 
device.

_________________________________________________________________
Unlimited Internet access for only $21.95/month.  Try MSN! 
http://resourcecenter.msn.com/access/plans/2monthsfree.asp


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F141mGbGxMYqcNkzCV40000eee7>