Date: Tue, 15 Oct 2002 21:28:34 +0200 From: "Karl M. Joch" <k.joch@kmjeuro.com> To: "Joseph Moore" <joe@ahpcns.com>, <questions@FreeBSD.ORG> Subject: Re: Compaq RAID - drive replacement - array rebuild problem Message-ID: <08d201c27481$1e108ec0$0f05a8c0@WSJK03> References: <HCEFKIHOFAJPLIKJIBALCEACCAAA.joe@ahpcns.com>
next in thread | previous in thread | raw e-mail | index | archive | help
i have a few 370 with the same raid controller. one one there was a similiar problem that the rebuild is done, but the leds never come up again as they should. the small leds works as usual, but the drive leds still shows no completed process. but the ida soft errors gone away and the drive works as raid 5 without ptobs and the rebuild should be ok because changing another hot plugged hard drive worked. cya karl ----- Original Message ----- From: "Joseph Moore" <joe@ahpcns.com> To: <questions@FreeBSD.ORG> Sent: Tuesday, October 15, 2002 9:02 PM Subject: Compaq RAID - drive replacement - array rebuild problem > I'm running 4.x STABLE (as of March 2001, aka 4.3RC#0) on a compaq DL380 > with integrated RAID (ida0). It had been running flawlessly for over a year > until one of the drives failed. I replaced the dead drive (hot-plugged) and > re-booted to start the array rebuild process. This was a couple of months > ago and the new drive is still flashing it's LEDs to indicate that the > rebuild is still underway. I re-booted the box and when the array controller > initialized it displayed a message saying that it would "continue the > automatic rebuild". How do I get this array rebuild to finish? It's a RAID 1 > config with 2, 18GB drives mirrored in hardware. > > TIA ...jgm > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?08d201c27481$1e108ec0$0f05a8c0>