Date: Sat, 22 Sep 2001 06:06:59 -0400 (EDT) From: Andres Meyer <ameyer@cputoasters.com> To: <freebsd-alpha@FreeBSD.ORG> Subject: Re: GA622T on pc164 FreeBSD-STABLE Message-ID: <Pine.LNX.4.33.0109220604170.22770-100000@webmages.com> In-Reply-To: <20010920094529.B54908@dragon.nuxi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 20 Sep 2001, David O'Brien wrote: > Can you post your /var/run/dmesg.boot ? There we are: l -m 444 repquota.8.gz /usr/share/man/man8 sym0:0:control msgout: 80 20 19 d. Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... done Uptime: 2h53m9s Rebooting... Unrecognized boot flag '0'. Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-STABLE #0: Sat Sep 22 09:38:15 CEST 2001 root@gundel.cablecom.ch:/usr/obj/usr/src/sys/MYKERNEL EB164 Digital AlphaPC 164 500 MHz, 500MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX> OSF PAL rev: 0x1000800020117 real memory = 131686400 (128600K bytes) avail memory = 123224064 (120336K bytes) Preloaded elf kernel "kernel" at 0xfffffc00005a6000. md0: Malloc disk cia0: ALCOR/ALCOR2, pass 3 cia0: extended capabilities: 21<DWEN,BWEN> pcib0: <2117x PCI host bus adapter> on cia0 pci0: <PCI bus> on pcib0 pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 5.0 irq 2 de0: <Digital 21140A Fast Ethernet> port 0x10200-0x1027f mem 0x8206e100-0x8206e17f irq 0 at device 6.0 on pci0 de0: interrupting at CIA irq 0 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:c0:f0:30:78:86 nge0: <National Semiconductor Gigabit Ethernet> port 0x10100-0x101ff mem 0x8206d000-0x8206dfff irq 1 at device 7.0 on pci0 nge0: interrupting at CIA irq 1 nge0: Ethernet address: 00:40:f4:00:0b:88 miibus0: <MII bus> on nge0 nsgphy0: <DP83861 10/100/1000 media interface> on miibus0 nsgphy0: 1000baseTX-FDX, 1000baseTX, 100baseTX-FDX, 100baseTX, 10baseT-FDX, 10baseT, auto isab0: <Intel 82378IB PCI to ISA bridge> at device 8.0 on pci0 isa0: <ISA bus> on isab0 sym0: <875> port 0x10000-0x100ff mem 0x8206c000-0x8206cfff,0x8206e000-0x8206e0ff irq 3 at device 9.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: SCAN AT BOOT disabled for targets 1 2 3 5 8 9 10 11 12 13 14 15. sym0: SCAN FOR LUNS disabled for targets 0 3 4 5 6. sym0: interrupting at CIA irq 3 atapci0: <CMD 646 ATA controller> port 0x10280-0x1028f irq 5 at device 11.0 on pci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 ppc0: interrupting at ISA irq 7 Timecounter "alpha" frequency 500004300 Hz Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. de0: enabling Full Duplex 100baseTX port Mounting root from ufs:/dev/da0a cd0 at sym0 bus 0 target 6 lun 0 cd0: <TOSHIBA CD-ROM XM-3701TA 2965> Removable CD-ROM SCSI-2 device cd0: 4.901MB/s transfers (4.901MHz, offset 15) cd0: cd present [326447 x 2048 byte records] da0 at sym0 bus 0 target 0 lun 0 da0: <CONNER CFP4207S 4.28GB 1420> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.33.0109220604170.22770-100000>