Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 16 Nov 2003 14:02:22 -0800
From:      Peter Wemm <peter@wemm.org>
To:        Perforce Change Reviews <perforce@freebsd.org>
Subject:   Re: PERFORCE change 42581 for review 
Message-ID:  <20031116220222.1CEAB2A8EB@canning.wemm.org>
In-Reply-To: <200311162142.hAGLgpWg022045@repoman.freebsd.org> 

next in thread | previous in thread | raw e-mail | index | archive | help
Peter Wemm wrote:
> http://perforce.freebsd.org/chv.cgi?CH=42581
> 
> Change 42581 by peter@peter_overcee on 2003/11/16 13:41:58
> 
> 	checkpoint, with all its WIP in full glory.

And with that, we make it to single user!

OK boot -s
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #195: Sun Nov 16 13:57:49 PST 2003
    peter@overcee.wemm.org:/home/peter/fbp4/hammer/sys/amd64/compile/HAMMER
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80600000.
ACPI APIC Table: <PTLTD          APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 844 (1797.66-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf58  Stepping = 8
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500000<NX,MMX+,LM,3DNow!+,3DNow!>
real memory  = 2147483648 (2048 MB)
avail memory = 2035417088 (1941 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-35 on motherboard
ioapic4 <Version 1.1> irqs 36-39 on motherboard
Pentium Pro MTRR support enabled
acpi0: <PTLTD    XSDT  > on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
unknown: I/O range not supported
unknown: I/O range not supported
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff iomem 0xd8000-0xdbfff on acpi0
pcib0: could not get PCI interrupt routing table for \_SB_.PCI0 - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xfa100000-0xfa100fff irq 19 at device 0.0 on pci1
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfa101000-0xfa101fff irq 19 at device 0.1 on pci1
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfa104000-0xfa1040ff irq 19 at device 0.2 on pci1
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: AMD EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
pci1: <network, ethernet> at device 1.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2000-0x203f mem 0xfa000000-0xfa0fffff,0xfa103000-0xfa103fff irq 17 at device 5.0 on pci1
fxp0: Ethernet address 00:d0:b7:21:31:94
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1020-0x102f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI Host-PCI bridge> on acpi0
pci8: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 on pci8
pci9: <ACPI PCI bus> on pcib3
pci8: <base peripheral, interrupt controller> at device 1.1 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 2.0 on pci8
pci10: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 1.0 on pci10
pci11: <PCI bus> on pcib5
pcib5: slot 0 INTA is routed to irq 29
pci11: <display, VGA> at device 0.0 (no driver attached)
pci8: <base peripheral, interrupt controller> at device 2.1 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci8
pcib6: could not get PCI interrupt routing table for \_SB_.PCI1.G1PA - AE_NOT_FOUND
pci12: <ACPI PCI bus> on pcib6
pci8: <base peripheral, interrupt controller> at device 3.1 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci8
pci13: <ACPI PCI bus> on pcib7
pci8: <base peripheral, interrupt controller> at device 4.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc8800-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1612> at ata1-master PIO4
Sending DHCP Discover packet from interface fxp0 (00:d0:b7:21:31:94)
Received DHCP Offer packet on fxp0 from 10.0.0.1 (accepted) (no root path)
ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Sending DHCP Request packet from interface fxp0 (00:d0:b7:21:31:94)
Received DHCP Ack packet on fxp0 from 10.0.0.1 (accepted) (got root path)
fxp0 at 10.0.0.27 server 10.0.0.1 boot file pxeboot
subnet mask 255.255.255.0 router 10.0.0.1 rootfs 10.0.0.3:/home/nfsroot/hammer
Adjusted interface fxp0
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Mounting root from nfs:
NFS ROOT: 10.0.0.3:/home/nfsroot/hammer
Enter full pathname of shell or RETURN for /bin/sh:
# ls
bin     boot    dev     etc     lib     libexec sbin
# ls -l
total 25
drwxr-xr-x  2 0  0  1024 Nov 16 19:53 bin
drwxr-xr-x  4 0  0   512 Nov 10 01:23 boot
dr-xr-xr-x  4 0  0   512 Nov 16 16:04 dev
drwxr-xr-x  2 0  0   512 Nov 16 21:27 etc
drwxr-xr-x  2 0  0  1024 Nov 16 19:53 lib
drwxr-xr-x  2 0  0   512 Nov 16 19:53 libexec
drwxr-xr-x  2 0  0  2048 Nov 16 19:53 sbin
#

Cheers,
-Peter
--
Peter Wemm - peter@wemm.org; peter@FreeBSD.org; peter@yahoo-inc.com
"All of this is for nothing if we don't go to the stars" - JMS/B5



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031116220222.1CEAB2A8EB>