Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 04 Dec 2003 06:31:36 -0500
From:      Chuck PUP Payne <payne@magidesign.com>
To:        <freebsd-questions@freebsd.org>
Subject:   Re: DynDNS
Message-ID:  <BBF48548.3FDE4%payne@magidesign.com>
In-Reply-To: <20031203160647.03c67b5e.b_cassidy@bellsouth.net>

next in thread | previous in thread | raw e-mail | index | archive | help
To be honet I want to set up a DynDNS, we run our own DNS server and have a
need for a DynDNS. I was wondering if there is a software package that I can
download to set this up or is it build into Bind already.

Thank for all the client information.

Payne


On 12/3/03 5:06 PM, "Bryan Cassidy" <b_cassidy@bellsouth.net> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Of course you need apache installed. It will print out on the screen after you
> get done with a make install clean on ddclient but after you copy the
> appropriate files just edit /usr/local/etc/ddclient.conf Here I have attached
> my ddclient.conf file minus the usr name and passwd of course.
> 
> HTH
> 
> ######################################################################
> ##
> ## Define default global variables with lines like:
> ##      var=value [, var=value]*
> ## These values will be used for each following host unless overridden
> ## with a local variable definition.
> ##
> ## Define local variables for one or more hosts with:
> ##      var=value [, var=value]* host.and.domain[,host2.and.domain...]
> ##
> ## Lines can be continued on the following line by ending the line
> ## with a \
> ##
> ######################################################################
> daemon=300                              # check every 300 seconds
> syslog=yes                              # log update msgs to syslog
> mail=root                               # mail all msgs to root
> mail-failure=root                       # mail failed update msgs to root
> pid=/var/run/ddclient.pid               # record PID in file.
> #
> #use=watchguard-soho,        fw=192.168.111.1:80        # via Watchguard's
> SOHO FW
> #use=netopia-r910,           fw=192.168.111.1:80        # via Netopia R910 FW
> #use=smc-barricade,          fw=192.168.123.254:80      # via SMC's Barricade
> FW
> #use=netgear-rt3xx,          fw=192.168.0.1:80          # via Netgear's
> internet FW
> #use=linksys,                fw=192.168.1.1:80          # via Linksys's
> internet FW
> #use=maxgate-ugate3x00,      fw=192.168.0.1:80          # via MaxGate's
> UGATE-3x00  FW
> #use=elsa-lancom-dsl10,      fw=10.0.0.254:80           # via ELSA LanCom
> DSL/10 DSL Router
> #use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80           # via ELSA LanCom
> DSL/10 DSL Router
> #use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80           # via ELSA LanCom
> DSL/10 DSL Router
> #use=alcatel-stp,            fw=10.0.0.138:80           # via Alcatel Speed
> Touch Pro
> #use=xsense-aero,            fw=192.168.1.1:80          # via Xsense Aero
> Router
> #use=allnet-1298,            fw=192.168.1.1:80          # via AllNet 1298 DSL
> Router
> #use=3com-oc-remote812,      fw=192.168.0.254:80        # via 3com
> OfficeConnect Remote 812
> #use=e-tech,                 fw=192.168.1.1:80          # via E-tech Router
> #use=cayman-3220h,           fw=192.168.0.1:1080        # via Cayman 3220-H
> DSL Router
> #
> #fw-login=admin,             fw-password=XXXXXX         # FW login and
> password
> #
> ## To obtain an IP address from FW status page (using fw-login, fw-password)
> #use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP
> Address
> #
> ## To obtain an IP address from Web status page (using the proxy if defined)
> #use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP
> Address
> #
> #use=ip,                     ip=127.0.0.1       # via static IP's
> #use=if,                     if=eth0            # via interfaces
> use=web                                 # via web
> #
> #protocol=dyndns2                               # default protocol
> #proxy=fasthttp.sympatico.ca:80                 # default proxy
> #server=members.dyndns.org                      # default server
> #server=members.dyndns.org:8245                 # default server (bypassing
> proxies)
> 
> login=user name                            # default login
> password=password for user                                   # default
> password
> mx=your.domain.tld                                # default MX
> #backupmx=yes|no                                # host is primary MX?
> #wildcard=yes|no                                # add wildcard CNAME?
> 
> ##
> ## dyndns.org dynamic addresses
> ##
> ## (supports variables: wildcard,mx,backupmx)
> ##
> server=members.dyndns.org,             \
> protocol=dyndns2                       \
> your.domain.tld
> 
> ##
> ## dyndns.org static addresses
> ##
> ## (supports variables: wildcard,mx,backupmx)
> ##
> # static=yes,                           \
> # server=members.dyndns.org,            \
> # protocol=dyndns2                      \
> # your-static-host.dyndns.org
> 
> ##
> ##
> ## dyndns.org custom addresses
> ##
> ## (supports variables: wildcard,mx,backupmx)
> ##
> # custom=yes,                           \
> # server=members.dyndns.org,            \
> # protocol=dyndns2                      \
> # your-domain.top-level,your-other-domain.top-level
> 
> ##
> ## ZoneEdit (zoneedit.com)
> ##
> # server=www.zoneedit.com,              \
> # protocol=zoneedit1,                   \
> # login=your-zoneedit-login,            \
> # password=your-zoneedit-password       \
> # your.any.domain,your-2nd.any.dom
> 
> ##
> ## EasyDNS (easydns.com)
> ##
> # server=members.easydns.com,           \
> # protocol=easydns,                     \
> # login=your-easydns-login,             \
> # password=your-easydns-password        \
> # your.any.domain,your-2nd.any.domain
> 
> ##
> ## Hammernode (hn.org) dynamic addresses
> ##
> # server=dup.hn.org,                    \
> # protocol=hammernode1,                 \
> # login=your-hn-login,                  \
> # password=your-hn-password             \
> # your-hn-host.hn.org,your-2nd-hn-host.hn.org
> 
> ##
> ## dslreports.com dynamic-host monitoring
> ##
> # server=members.dslreports.com         \
> # protocol=dslreports1,                 \
> # login=dslreports-login,               \
> # password=dslreports-password          \
> # dslreports-unique-id
> 
> ##
> ## OrgDNS.org account-configuration
> ##
> #use=web, web=members.orgdns.org/nic/ip
> # server=www.orgdns.org                 \
> # protocol=dyndns2                      \
> # login=yourLoginName                   \
> # password=yourPasswort                 \
> # yourSubdomain.orgdns.org
> 
> ##
> ## dnspark.com
> ## (supports variables: mx, mxpri)
> ##
> # use=web, web=ipdetect.dnspark.com, web-skip='Current Address:'
> # protocol=dnspark,                     \
> # server=www.dnspark.com,               \
> # your-host.dnspark.com
> 
> 
> 
> On Wed, 03 Dec 2003 12:49:18 -0500
> Payne <payne@magidesign.com> wrote:
> 
>> Hi, I wanting to set up a DynDNS set what do I need for it work on FreeBSD?
>> 
>> Payne
>> 
>> 
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.3 (FreeBSD)
> 
> iD8DBQE/zl53m8uTTHnDH3ERArkOAJsGbUHnKE0iGbEMIp62dPtEgcWICACeKytW
> 7z+2qWQ173l0yN6luiQXH/U=
> =85G9
> -----END PGP SIGNATURE-----
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
> 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BBF48548.3FDE4%payne>