Date: Fri, 16 Dec 2005 10:52:14 +0100 From: Sebastian Koehler <acex5@syncer.de> To: Brad Miele <bmiele@ipnstock.com>, freebsd-scsi@freebsd.org Subject: Re: Help with HP MSA 1500cs and DL380 Message-ID: <43A28E4E.9010501@syncer.de> In-Reply-To: <20051215140240.X1010@payswan.miggles.org> References: <43A1B967.2010601@syncer.de> <20051215140240.X1010@payswan.miggles.org>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Brad, FCA2214 should run firmware 1.45 for hosts other than Windows. Did you notice ispfw(4) and isp(4)? They are talking about a different kind of firmware for the HBA. Maybe you should rebuild your kernel with device isp # For one or more SCSI busses: device scbus0 device ispfw to use the FreeBSD provided firmware. Please connect via serial line to the MSA1000 controller. Enter the command show TECH_SUPPORT. You can also connect the MSA1000 serial cable to the MSA20 serial port and activate the debugging output by pressing the TAB key. This would be only helpfull, if we know that on of the MSA20 boxes got a problem. MSA 1000/1500 cs Command Line Interface http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00149849/c00149849.pdf Page 50 show how to configure a connection profile. You need to set it to "Solaris". CLI> ADD CONNECTION ABC WWPN=12345678-12345678 PROFILE=SOLARIS Why do you use 3 I/O Modules in the MSA1500cs? Which MSAx0 is attached to which I/O module and to which port? Please check that each MSA30 is connected to the SCSI port on the I/O module and MSA20 to a SATA capable port. By the way, its not recommended to spread arrays across different boxes. If one box fail, more than an array will be down. ACU-XE or ACU is a web-based application which can be used to configure the array. You can only launch it by booting up the MSA1500cs support CD, cause it is not available on FreeBSD. MSA1500 Support Software CD http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=415598&swItem=co-22975-3&prodNameId=415600&swEnvOID=1097&swLang=13&mode=4&idx=0 Which version of FreeBSD you are running? (uname -a) Regards, Sebastian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDoo5NufwF6d+3vEURAlqQAKCV3/vv1ANmkUYI3eaBakZaC/zZAgCfTfqw 4P2JFX4FGfH/H5aUAUMOVsA= =TrE2 -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43A28E4E.9010501>