Date: Sun, 20 Jan 2019 19:34:04 +0100 From: Kurt Jaeger <pi@freebsd.org> To: "Rodney W. Grimes" <freebsd-rwg@pdx.rh.cn85.dnsmgr.net> Cc: freebsd-current@freebsd.org Subject: Re: Multiport serial card Exsys EX-44388, where are the devices ? Message-ID: <20190120183404.GA78316@home.opsec.eu> In-Reply-To: <201901191549.x0JFnvmq061149@pdx.rh.CN85.dnsmgr.net> References: <20190119090238.GE54920@home.opsec.eu> <201901191549.x0JFnvmq061149@pdx.rh.CN85.dnsmgr.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi!
> > > uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
[...]
> > I compared it to a second, similar hardware and there I found the same uart2,
> > even if no card was installed 8-(
> >
> > So it seems the card is not detected at all 8-(
>
> Need to find out why it is not showing up in the PCI
> listings. Can you post the output from
Sorry for my late answer, I was traveling for a day.
On that box, it was not detected at all. I moved it to a different box,
added the patch below, rebuild the kernel and rebooted.
Effect:
l cuau?
crw-rw---- 1 uucp dialer 0x8a Jan 19 12:10 cuau0
crw-rw---- 1 uucp dialer 0x37 Jan 19 12:17 cuau2
crw-rw---- 1 uucp dialer 0x3d Jan 19 12:10 cuau3
crw-rw---- 1 uucp dialer 0x43 Jan 19 12:10 cuau4
crw-rw---- 1 uucp dialer 0x49 Jan 19 13:09 cuau5
crw-rw---- 1 uucp dialer 0x4f Jan 19 12:14 cuau6
crw-rw---- 1 uucp dialer 0x55 Jan 19 12:10 cuau7
crw-rw---- 1 uucp dialer 0x5b Jan 19 12:10 cuau8
crw-rw---- 1 uucp dialer 0x61 Jan 19 12:10 cuau9
crw-rw---- 1 uucp dialer 0x6f Jan 19 13:58 cuaua
crw-rw---- 1 uucp dialer 0x75 Jan 19 13:58 cuaub
crw-rw---- 1 uucp dialer 0x7b Jan 19 13:58 cuauc
crw-rw---- 1 uucp dialer 0x81 Jan 19 13:58 cuaud
[...]
pcib7@pci0:6:0:0: class=0x060400 card=0x00000000 chip=0x10801b21 rev=0x04 hdr=0x01
vendor = 'ASMedia Technology Inc.'
device = 'ASM1083/1085 PCIe to PCI Bridge'
class = bridge
subclass = PCI-PCI
puc0@pci0:7:4:0: class=0x070002 card=0x000814a1 chip=0x000814a1 rev=0xb0 hdr=0x00
vendor = 'Systembase Co Ltd'
class = simple comms
subclass = UART
bar [10] = type I/O Port, range 32, base 0x1040, size 64, enabled
bar [14] = type I/O Port, range 32, base 0x1000, size 64, enabled
dmesg:
dmesg | grep uart
uart2: <16750 or compatible> at port 1 on puc0
uart3: <16750 or compatible> at port 2 on puc0
uart4: <16750 or compatible> at port 3 on puc0
uart5: <16750 or compatible> at port 4 on puc0
uart6: <16750 or compatible> at port 5 on puc0
uart7: <16750 or compatible> at port 6 on puc0
uart8: <16750 or compatible> at port 7 on puc0
uart9: <16750 or compatible> at port 8 on puc0
uart10: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0
uart11: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0
uart12: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0
uart13: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
-------------
Index: pucdata.c
===================================================================
--- pucdata.c (revision 343188)
+++ pucdata.c (working copy)
@@ -870,6 +870,16 @@
},
/*
+ * Systembase SB16C1058
+ */
+
+ { 0x14a1, 0x0008, 0x14a1, 0x0008,
+ "ExSys EX-44388",
+ DEFAULT_RCLK * 8,
+ PUC_PORT_8S, 0x10, 0, 8,
+ },
+
+ /*
* Perle boards use Oxford Semiconductor chips, but they store the
* Oxford Semiconductor device ID as a subvendor device ID and use
* their own device IDs.
--
pi@opsec.eu +49 171 3101372 One year to go !
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190120183404.GA78316>