Date: Sun, 6 Jan 2002 16:51:32 -0500 From: Austin hall <ash@vectorstar.net> To: questions@FreeBSD.ORG Subject: Re: xcdroast , scsi emulation in kernel?? Message-ID: <20020106165132.A4180@darkstar.bellsouth.net> In-Reply-To: <3C37F013.BA5BFCBC@nc.rr.com>; from jramos2@nc.rr.com on Sun, Jan 06, 2002 at 01:34:59AM -0500 References: <Pine.NEB.4.33.0201052345510.6609-100000@sdf.lonestar.org> <07a6a0030010612FE5@mail5.nc.rr.com> <3C379F48.D3368A9@pop16.odn.ne.jp> <3C37F013.BA5BFCBC@nc.rr.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sunday 06 January J Ramos wrote: > WATANABE Kiyoshi wrote: > > > > On Sat, 5 Jan 2002 20:29:29 -0500, > > Brian T.Schellenberger <bts@babbleon.org> wrote: > > > FreeBSD has no SCSI emulation; you need burncd rather than cdrecord. > > > It's in the CD burning package so you should already have it installed. > > > > > > I *suspect* that xcdroast does not support burncd, but I don't know; I've > > > never used any of the GUIs for burning--the line-mode commands have always > > > suited me just fine (with scripts containing my commonly-used options, of > > > course). > > > > > > > > > On Saturday 05 January 2002 07:01 pm, Rakesh Prajapati wrote: > > > > Hi , > > > > > > > > I use FreeBSD 4.4 RELEASE > > > > > > > > I am trying to run xcdroast to burn cd's which I installed from the ports. > > > > > > > > xcdroast gives me the following error > > > > > > > > enable scsi emulation in your kernel(This is not the exact message). How > > > > do i do that?? > > > > > > > > I have IDE/ATAPI cdwriter and cd rom installed. > > > > > > > > suggest me any other cd burning s/w if u know of. > > > > > <snip> > > > > SCSI emulation for FreeBSD is available > > at http://www.cuivre.fr.eu.org/~thomas/atapicam/ > > > > I've been fiddling with that for the past few days while snowed in, and > the recompiled > kernel locks up like Fort Knox. If anyone is using this patch, can they > send me a dmesg, please? Just curious as to what it would look like if I > could get it to work. :-) uname: FreeBSD darkstar 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE #5: Sat Jan 5 23:26:45 EST 2002 ash@darkstar:/usr/obj/usr/src/sys/DARKSTAR i386 dmesg: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-PRERELEASE #5: Sat Jan 5 23:26:45 EST 2002 ash@darkstar:/usr/obj/usr/src/sys/DARKSTAR Timecounter "i8254" frequency 1193182 Hz CPU: AMD Duron(tm) processor (851.94-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x631 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory = 259981312 (253888K bytes) avail memory = 247558144 (241756K bytes) Preloaded elf kernel "kernel" at 0xc04d7000. Preloaded elf module "splash_bmp.ko" at 0xc04d709c. Preloaded elf module "vesa.ko" at 0xc04d7140. Preloaded splash_image_data "/boot/pix/daemon-babe.bmp" at 0xc04d71dc. VESA: v3.0, 8192k memory, flags:0x1, mode table:0xc00c0e2a (c0000e2a) VESA: S3 Incorporated. Savage4 Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 6 entries at 0xc00fdbf0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <S3 model 8a26 graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0 atapci0: Correcting VIA config for southbridge data corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 10 at device 7.5 on pci0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xdf000000-0xdf00007f irq 11 at device 8.0 on pci0 xl0: Ethernet address: 00:04:75:7a:02:50 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 32253MB <IC35L040AVER07-0> [65531/16/63] at ata0-master UDMA100 ad1: 12893MB <QUANTUM FIREBALL CX13.5A> [26197/16/63] at ata0-slave UDMA66 acd0: CDROM <COMPAQ SCR-3232> at ata1-master using PIO4 acd1: CD-RW <R/RW 4x4x24> at ata1-slave using PIO4 (noperiph:atapi1:0:-1:-1): Registered SIM for ata1 atapicam1m: unknown CMD (0x12) - ILLEGAL REQUEST asc=24 ascq=00 error=01 atapicam1s: read data overrun 56/55 Mounting root from ufs:/dev/ad1s1a cd0 at atapi1 bus 0 target 0 lun 0 cd0: <COMPAQ CD-ROM SCR-3232 Q107> Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present cd1 at atapi1 bus 0 target 1 lun 0 cd1: <IDE-CD R/RW 4x4x24 1.04> Removable CD-ROM SCSI-0 device cd1: 3.300MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present ad1s1a: UDMA ICRC error reading fsbn 95 of 16-31 (ad1s1 bn 95; cn 0 tn 1 sn 32) retrying ad1s1a: UDMA ICRC error reading fsbn 95 of 16-31 (ad1s1 bn 95; cn 0 tn 1 sn 32) retrying ad1s1a: UDMA ICRC error reading fsbn 95 of 16-31 (ad1s1 bn 95; cn 0 tn 1 sn 32) retrying ad1s1a: UDMA ICRC error reading fsbn 95 of 16-31 (ad1s1 bn 95; cn 0 tn 1 sn 32) falling back to PIO mode ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) falling back to PIO mode > Josh BTW, I just applied the patch and tested it last night and it worked great--this morning I finally removed linux partition. ;-) Austin -- "When in doubt, tell the truth." -- Mark Twain To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020106165132.A4180>