Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 30 Jan 2010 00:25:19 +0100
From:      Diego Depaoli <trebestie@gmail.com>
To:        Alexander Motin <mav@freebsd.org>
Cc:        FreeBSD-Current <freebsd-current@freebsd.org>
Subject:   Re: Pack of CAM improvements
Message-ID:  <83e5fb981001291525k6d533fdaj1611df806077d94f@mail.gmail.com>
In-Reply-To: <4B62DD46.4060908@FreeBSD.org>
References:  <4B55D9D4.1000008@FreeBSD.org> <201001231407.o0NE7l8j002620@triton8.kn-bremen.de> <20100123184619.257203d9@ernst.jennejohn.org> <4B5C79CF.9070504@FreeBSD.org> <83e5fb981001290503n140d4c05ga755853a1588de@mail.gmail.com> <4B62DD46.4060908@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jan 29, 2010 at 2:06 PM, Alexander Motin <mav@freebsd.org> wrote:
> Diego Depaoli wrote:
>> On Sun, Jan 24, 2010 at 5:48 PM, Alexander Motin <mav@freebsd.org> wrote:
>>> New patch version should handle this and some other problems:
>>> http://people.freebsd.org/~mav/cam-ata.20100124.patch
>> I didn't yet test in depth your patch but...
>> - ogmrip doesn't more freeze the system
>> - while the system boots, closing the optical drive's tray with a
>> video dvd inserted, I get a reproducible (for me) panic.
>
> If you wish it to be fixed - you had to give much more info.
handwritten
------------------------
cd0: \ukD [ua?
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered

fatal trap 18: integer divide fault while in kernel mode
cpuid=1, apic id=01
instruction pointer = 0x20:0xc057efcd
stack pointer = 0x28:0xc63e0b94
frame pointer = 0x28:0xc63e0bd4
code segment = base 0x0, limit 0xfffff, type 0x1b
                           = DPL0, pres 1, def32 1, gran 1
processor eflags = interrupt enbled, resume, IOPL = 0
current process = 2(g_event)
trap number = 18
panic integer divide fault
cpuid = 1
-------------------------

only power button works

my regular dmesg

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #6 r203138M: Fri Jan 29 02:39:01 CET 2010
    root@genipizza.casadep.home:/usr/obj/usr/src/sys/CAMKERN i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2730.12-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3412471808 (3254 MB)
ACPI APIC Table: <121708 APIC2302>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ACPI Warning: Optional field Pm2ControlBlock has zero address or
length:        0       0/1 (20100121/tbfadt-655)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <121708 RSDT2302> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfe00000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem
0xd0000000-0xdfffffff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq
18 at device 5.0 on pci1
drm0: <ATI Radeon HD 3200 Graphics> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.31.0 20080613
hdac0: <ATI RS780 High Definition Audio Controller> mem
0xfeae8000-0xfeaebfff irq 19 at device 5.1 on pci1
hdac0: HDA Driver Revision: 20100122_0141
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111DP
PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem
0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 17 at device 0.0 on
pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: Ethernet address: 00:19:66:a7:2a:37
re0: [FILTER]
ahci0: <ATI IXP700 AHCI SATA controller> port
0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f
mem 0xfe8ffc00-0xfe8fffff irq 22 at device 17.0 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq
16 at device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq
16 at device 18.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ff8ff
irq 17 at device 18.2 on pci0
ehci0: [ITHREAD]
ehci0: AMD SB600/700 quirk applied
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq
18 at device 19.0 on pci0
ohci2: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe8f7000-0xfe8f7fff irq
18 at device 19.1 on pci0
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff400-0xfe8ff4ff
irq 19 at device 19.2 on pci0
ehci1: [ITHREAD]
ehci1: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on
pci0
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
hdac1: <ATI SB600 High Definition Audio Controller> mem
0xfe8f0000-0xfe8f3fff irq 16 at device 20.2 on pci0
hdac1: HDA Driver Revision: 20100122_0141
hdac1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
ohci4: <OHCI (generic) USB controller> mem 0xfe8f6000-0xfe8f6fff irq
18 at device 20.5 on pci0
ohci4: [ITHREAD]
usbus6: <OHCI (generic) USB controller> on ohci4
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: ATI RS690/780 HDMI
pcm0: <HDA ATI RS690/780 HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: Realtek ALC662
pcm1: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0cd0 at ata1 bus 0 scbus6
target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-S222L SB02> Removable CD-ROM SCSI-0 device
cd0: 66.700MB/s transfers (UDMA4, PIO size 65534bytes)
cd0: cd present [3349840 x 2048 byte records]

ada0: <SAMSUNG HD321KJ CP100-11> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO size 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <SAMSUNG HD321KJ CP100-12> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO size 8192bytes)
ada1: Command Queueing enabled
ada1: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen0.2: <Hewlett-Packard> at usbus0
ulpt0: <Hewlett-Packard DeskJet 940C, class 0/0, rev 1.10/1.00, addr
2> on usbus0
ulpt0: using bi-directional mode
ugen1.2: <Microsoft> at usbus1
ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr
2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
GEOM: ada0: partition 1 does not start on a track boundary.
GEOM: ada0: partition 1 does not end on a track boundary.
GEOM: ada0s4: geometry does not match label (255h,63s != 16h,63s).
GEOM: ada1: partition 3 does not start on a track boundary.
GEOM: ada1: partition 3 does not end on a track boundary.
Trying to mount root from ufs:/dev/label/rootbsd
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
re0: link state changed to UP
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780/RS880 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
info: [drm] Resetting GPU
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780/RS880 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]

ahci0@pci0:0:17:0:	class=0x010601 card=0x43911849 chip=0x43911002
rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'SB700 SATA Controller [AHCI mode]'
    class      = mass storage
    subclass   = SATA
    bar   [10] = type I/O Port, range 32, base 0xc000, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xb000, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xa000, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x9000, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0x8000, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xfe8ffc00, size 1024, enabled
    cap 01[60] = powerspec 2  supports D0 D3  current D0
    cap 12[70] = SATA Index-Data Pair

Let me know if I must provide other info

Cheers

-- 
Diego Depaoli



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?83e5fb981001291525k6d533fdaj1611df806077d94f>