Date: Sat, 24 Jul 2010 23:32:57 +0100 From: John Hawkes-Reed <hirez@libeljournal.com> To: freebsd-stable@freebsd.org Cc: Dan Langille <dan@langille.org> Subject: Re: Using GTP and glabel for ZFS arrays Message-ID: <4C4B6A19.5050309@libeljournal.com> In-Reply-To: <4C4B4E89.8040101@langille.org> References: <4C47B57F.5020309@langille.org> <4C48E695.6030602@langille.org> <4C498024.7050106@libeljournal.com> <4C4B4E89.8040101@langille.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 24/07/2010 21:35, Dan Langille wrote: > On 7/23/2010 7:42 AM, John Hawkes-Reed wrote: >> Dan Langille wrote: >>> Thank you to all the helpful discussion. It's been very helpful and >>> educational. Based on the advice and suggestions, I'm going to adjust >>> my original plan as follows. >> >> [ ... ] >> >> Since I still have the medium-sized ZFS array on the bench, testing this >> GPT setup seemed like a good idea. >> bonnie -s 50000 >> The hardware's a Supermicro X8DTL-iF m/b + 12Gb memory, 2x 5502 Xeons, >> 3x Supermicro USASLP-L8I 3G SAS controllers and 24x Hitachi 2Tb drives. >> >> Partitioning the drives with the command-line: >> gpart add -s 1800G -t freebsd-zfs -l disk00 da0[1] gave the following >> results with bonnie-64: (Bonnie -r -s 5000|20000|50000)[2] > > What test is this? I just installed benchmarks/bonnie and I see no -r > option. Right now, I'm trying this: bonnie -s 50000 http://code.google.com/p/bonnie-64/ -- JH-R
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4C4B6A19.5050309>