Date: Thu, 7 Jun 2012 14:45:42 -0700 From: YongHyeon PYUN <pyunyh@gmail.com> To: Mike Tancsa <mike@sentex.net> Cc: freebsd-hardware@freebsd.org Subject: Re: pcie realtek issue (re driver) Message-ID: <20120607214542.GE3834@michelle.cdnetworks.com> In-Reply-To: <4FCF9B42.4090100@sentex.net> References: <4FC03C83.4030109@sentex.net> <20120601200942.GD10661@michelle.cdnetworks.com> <4FC8A903.6060203@sentex.net> <201206011030.52753.jhb@freebsd.org> <4FCA223F.5080009@sentex.net> <20120605004720.GB4010@michelle.cdnetworks.com> <4FCF9B42.4090100@sentex.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jun 06, 2012 at 02:02:42PM -0400, Mike Tancsa wrote: > On 6/4/2012 8:47 PM, YongHyeon PYUN wrote: > > Hmm, Target abort/parity error looks serious to me. Could you > > remove re(4) driver in kernel and perform cold boot and check the > > AER errors again? > > (I assume your controller is not a stand-alone PCIe controller so > > I excluded resitting the controller). > > > Hi, > This is a stand alone card actually. Here it is after a power cycle. > Perhaps just a bad card ? Probably yes. For parity errors there is nothing can be done in driver side. It would be interesting to know how other operating systems handle this. > > none2@pci0:4:0:0: class=0x020000 card=0xffffffff chip=0x816810ec > rev=0x03 hdr=0x00 > vendor = 'Realtek Semiconductor Co., Ltd.' > device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' > class = network > subclass = ethernet > bar [10] = type I/O Port, range 32, base 0, size 256, disabled > bar [18] = type Memory, range 64, base 0, size 4096, disabled > bar [20] = type Prefetchable Memory, range 64, base 0, size 16384, > disabled > cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 > cap 05[50] = MSI supports 1 message, 64 bit > cap 10[70] = PCI-Express 2 endpoint IRQ 2 max data 128(128) link x1(x1) > cap 11[ac] = MSI-X supports 4 messages in maps 0x20 and 0x2c > PCI errors = Master Data Parity Error > Sent Target-Abort > Received Target-Abort > Received Master-Abort > Signalled System Error > Detected Parity Error
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120607214542.GE3834>