Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 5 Mar 2006 14:44:02 -0500 (EST)
From:      "kalin mintchev" <kalin@el.net>
To:        freebsd-questions@freebsd.org
Subject:   Re: winmodem driver
Message-ID:  <2101.148.221.147.177.1141587842.squirrel@mail.el.net>
In-Reply-To: <61153.201.137.37.143.1141441847.squirrel@mail.el.net>
References:  <20060225120041.2A09C16A424@hub.freebsd.org> <20060225210638.GA6732@ns.museum.rain.com> <61153.201.137.37.143.1141441847.squirrel@mail.el.net>

next in thread | previous in thread | raw e-mail | index | archive | help

what do i need to add to this information to get some help?

>> You forgot to tell us WHICH model of ThinkPad concerns you.  Modems in
>> older ThinkPads, such as a T21 or A20m may be supported by the
>> comms/ltmdm port.
>
> ok... i have the ltmdm installed. i run the ltmdm.sh. nothing happens.
> i load the ltmdm module manualy with kldload. it's loaded. now what?
>
> here is what i have for a modem:
>
> none1@pci0:31:6:        class=0x070300 card=0x051a1014 chip=0x24868086
> rev=0x02 hdr=0x00
>     vendor   = 'Intel Corporation'
>     device   = '82801CA/CAM (ICH3-S/ICH3-M) AC'97 Modem Controller'
>     class    = simple comms
>     subclass = generic modem
>
> the machine is a t30 thinkpad.
>
> i also have a pcmci 3COM modem card that shows up as:
>
> sio4: <3Com 3CXM/3CCM556> at port 0x2f8-0x2ff irq 11 function 0 config 33
> on pccard0
> sio4: type 16550A
> sio4: unable to activate interrupt in fast mode - using normal mode
>
> not sure what normal mode is. and i don't see it in the pciconf.
>
> i have a ppp.conf which looks exactly as the one in the handbook. when is
> start ppp after a while i get the propmpt and after that if i type: dial
> _tag_ the machine freezes...
>
> the pci irqs in the bios are all 11. i guess i have to make them all
> auto?!
>
> i just need one of these modems... just one....
>
> thanks for any help...
>
>
>
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe@freebsd.org"
>





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2101.148.221.147.177.1141587842.squirrel>