Date: Fri, 13 Jun 2014 14:49:36 -0400 From: Mike Tancsa <mike@sentex.net> To: Daniel Braniss <danny@cs.huji.ac.il> Cc: hackers@freebsd.org Subject: Re: iPXE booting latest PCengines alu board Message-ID: <539B47C0.2050400@sentex.net> In-Reply-To: <A6728A0C-1420-47B4-8A0D-325A5C0644E0@cs.huji.ac.il> References: <9D14C4BD-8A13-43FC-ACDA-0315A58CEBC6@cs.huji.ac.il> <5399C6A0.9010506@sentex.net> <A6728A0C-1420-47B4-8A0D-325A5C0644E0@cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
On 6/13/2014 4:24 AM, Daniel Braniss wrote: > > On Jun 12, 2014, at 6:26 PM, Mike Tancsa <mike@sentex.net > <mailto:mike@sentex.net>> wrote: >> If you mean http://www.pcengines.ch/apu.htm, just make sure you are >> booting a relatively recent FreeBSD version (newer than April I > > no, it does not :-(, the bios has iPXE not PXE - notice the little i) > after hitting ^B i managed some progress: > FreeBSD 7.0-RC1 #41: Sun Dec 30 15:19:13 IST 2007 When I said newer than April, I meant newer than April 2014. You really need to boot 7.0 ?? I am netbooting RELENG_10 just fine # head -20 /var/run/dmesg.boot Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-STABLE #1 r262980M: Mon Mar 10 16:54:07 EDT 2014 mdtancsa@ich10.sentex.ca:/home/pxe10/usr/obj/home/pxe10/usr/src/sys/GENERIC i386 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 CPU: AMD G-T40E Processor (1000.02-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2 Stepping = 0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> TSC: P-state invariant, performance statistics real memory = 3741364224 (3568 MB) avail memory = 3652464640 (3483 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <CORE COREBOOT> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) Searching bootorder for: /rom@genroms/pxeboot.rom Press F12 for boot menu. drive 0x000fd910: PCHS=0/0/0 translation=lba LCHS=957/64/63 s=3862528 drive 0x000fd940: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=61865984 Space available for UMB: 000c1000-000ee000 Returned 49152 bytes of ZoneHigh e820 map has 6 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 000000007e16ac00 = 1 RAM 4: 000000007e16ac00 - 000000007efffc00 = 2 RESERVED 5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED enter handle_19: NULL Booting from ROM... Booting from c000:0358 iPXE (PCI 00:00.0) starting execution...ok iPXE initialising devices...ok iPXE 1.0.0+ (b757) -- Open Source Network Boot Firmware -- http://ipxe.org Features: HTTP iSCSI DNS TFTP AoE bzImage ELF MBOOT PXE PXEXT Menu net0: 00:0d:b9:33:11:c4 using rtl8168 on PCI01:00.0 (open) [Link:down, TX:0 TXE:0 RX:0 RXE:0] [Link status: Down (http://ipxe.org/38086101)] Waiting for link-up on net0... failed: Down (http://ipxe.org/38086101) net1: 00:0d:b9:33:11:c5 using rtl8168 on PCI02:00.0 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] DHCP (net1 00:0d:b9:33:11:c5)........... ok net1: 192.168.43.213/255.255.255.0 gw 192.168.43.1 Nothing to boot: No such file or directory (http://ipxe.org/2d03e13b) net2: 00:0d:b9:33:11:c6 using rtl8168 on PCI03:00.0 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] DHCP (net2 00:0d:b9:33:11:c6)...... ok net1: 192.168.43.213/255.255.255.0 gw 192.168.43.1 (inaccessible) net2: 10.255.255.75/255.255.255.0 gw 10.255.255.1 Next server: 10.255.255.1 Filename: pxe10/boot/pxeboot Root path: /home/pxe10 tftp://10.255.255.1/pxe10/boot/pxeboot... ok PXE Loader 1.00 Building the boot loader arguments Relocating the loader and the BTX Starting the BTX loader /boot/kernel/kernel text=0xf09688 data=0xd02e8+0xe61e8 syms=[0x4+0xd2850+0x4+0x15704b] | ______ ____ _____ _____ | ____| | _ \ / ____| __ \ | |___ _ __ ___ ___ | |_) | (___ | | | | | ___| '__/ _ \/ _ \| _ < \___ \| | | | | | | | | __/ __/| |_) |____) | |__| | | | | | | | || | | | |_| |_| \___|\___||____/|_____/|_____/ ``` ` s` `.....---.......--.``` -/ +------------Welcome to FreeBSD-----------+ +o .--` /y:` +. | | yo`:. :o `+- | 1. Boot Multi User [Enter] | y/ -/` -o/ | 2. Boot [S]ingle User | .- ::/sy+:. | 3. [Esc]ape to loader prompt | / `-- / | 4. Reboot | `: :` | | `: :` | Options: | / / | 5. Configure Boot [O]ptions... | .- -. | | -- -. | | `:` `:` | | .-- `--. | | .---.....----. +-----------------------------------------+ Booting... Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-STABLE #3 r267161: Fri Jun 6 13:55:58 EDT 2014 mdtancsa@ich10.sentex.ca:/home/pxe10/usr/obj/home/pxe10/usr/src/sys/GENERIC i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: AMD G-T40E Processor (1000.02-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2 Stepping = 0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT> TSC: P-state invariant, performance statistics real memory = 2114293760 (2016 MB) avail memory = 2052497408 (1957 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <CORE COREBOOT> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 random device not loaded; using insecure entropy ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd0 at kbdmux0 random: <Software, Yarrow> initialized module_register_init: MOD_LOAD (vesa, 0xc0f67220, 0) error 19 acpi0: <CORE COREBOOT> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 450 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xfe500000-0xfe500fff,0xfe400000-0xfe403fff at device 0.0 on pci1 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 00:0d:b9:33:11:c4 pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xfe700000-0xfe700fff,0xfe600000-0xfe603fff at device 0.0 on pci2 re1: Using 1 MSI-X message re1: ASPM disabled re1: Chip rev. 0x2c000000 re1: MAC rev. 0x00200000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Ethernet address: 00:0d:b9:33:11:c5 pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xfe900000-0xfe900fff,0xfe800000-0xfe803fff at device 0.0 on pci3 re2: Using 1 MSI-X message re2: ASPM disabled re2: Chip rev. 0x2c000000 re2: MAC rev. 0x00200000 miibus2: <MII bus> on re2 rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re2: Ethernet address: 00:0d:b9:33:11:c6 pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ath0: <Atheros 9280> mem 0xfea00000-0xfea0ffff at device 0.0 on pci4 ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: AR9280 mac 128.2 RF5133 phy 13.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4020-0x4027,0x4040-0x4043,0x4028-0x402f,0x4044-0x4047,0x4000-0x400f mem 0xfeb04000-0xfeb043ff at device 17.0 on pci0 ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb00000-0xfeb00fff at device 18.0 on pci0 usbus0 on ohci0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04400-0xfeb044ff at device 18.2 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb01000-0xfeb01fff at device 19.0 on pci0 .... ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?539B47C0.2050400>