Date: Tue, 8 Feb 2000 19:27:30 -0800 From: Gunnar H Reichert-Weygold <postmaster@paganlibrary.com> To: freebsd-questions@FreeBSD.ORG Subject: Sound Card - I give up! Message-ID: <00020819323300.00329@gunnar.my.domain>
next in thread | raw e-mail | index | archive | help
I have a PCI PnP Awe64.
The kernel inlcudes:
controller pnp0 # PnP support for ISA
device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0
The ouput from dmesg follows:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-RELEASE #0: Thu Feb 3 08:16:35 PST 2000
root@gunnar.my.domain:/usr/src/sys/compile/FREEBIE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (334.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67108864 (65536K bytes)
avail memory = 61808640 (60360K bytes)
Preloaded elf kernel "kernel" at 0xc0349000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
uhci0: <Intel 82371AB/EB USB Host Controller> rev 0x01 int d irq 11 on pci0.7.2
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
ncr0: <ncr 53c815 fast10 scsi> rev 0x04 int a irq 10 on pci0.15.0
Probing for devices on PCI bus 1:
vga0: <ATI model 4c42 graphics accelerator> rev 0xdc int a irq 255 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL009d [0x9d008c0e] Serial 0x00029c18 Comp ID: PNPb02f [0x2fb0d041]
This is a SB16 PnP, but LDN 0 is disabled
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model ThinkingMouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pcm0 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST34321A>
wd0: 4103MB (8404830 sectors), 8894 cyls, 15 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <ST313032A>
wd1: 12419MB (25434228 sectors), 25232 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CD-ROM 48X/AKU/U23>, removable, intr, dma, iordis
acd0: drive speed 0 - 8250KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
wdc1: unit 1 (atapi): <CRW6206A/1.2A>, removable, dma, iordy
acd1: drive speed 1034KB/sec, 384KB cache
acd1: supported read types: CD-R, CD-RW, CD-DA, packet track
acd1: supported write types: CD-R, CD-RW, test write
acd1: Audio: play, 128 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: CD-RW blank medium, unlocked, lock protected
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppb0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED PCL5,PJL
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
cs0 not found at 0x300
ze0 not found at 0x300
zp0 not found at 0x300
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
joy0 at 0x201 on isa
joy0: joystick
usb0: <Intel 82371AB/EB USB Host Controller>
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0
ugen0: Vision VC6452V002 Camera, rev 1.00/1.00, addr 2
ugen1
ugen1: Color FlatbedScanner 5, rev 1.00/1.21, addr 3
Waiting 15 seconds for SCSI devices to settle
sa0 at ncr0 bus 0 target 4 lun 0
sa0: <CONNER CTT8000-S 1.22> Removable Sequential Access SCSI-2 device
sa0: 6.944MB/s transfers (6.944MHz, offset 8)
changing root device to wd1s1a
Since I've grayed too much hair on this one, what are your
personal recommendations for a new sound card that you know works?
--
I used to be self-actualized, now I'm just confused.
Gunnar H Reichert-Weygold
The Pagan Library
http://www.paganlibrary.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00020819323300.00329>