Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 10 Jun 2002 14:56:34 -0500 (CDT)
From:      John Prince <johnp@vwebpage.com>
To:        freebsd-stable@freebsd.org
Cc:        RParker@weather.com
Subject:   Re: ATA Atapi Cdrom Problems
Message-ID:  <1023738994.3d0504725e43f@webmail.vwebpage.com>

next in thread | raw e-mail | index | archive | help

I was just indicating the newer drives we have are working..
I am forwarding this to the forum.
There is obviously some sort of problem.
Thanks for your reply.
--john

----- Forwarded message from RParker@weather.com -----
Date: Mon, 10 Jun 2002 11:34:59 -0400
From: RParker@weather.com
Reply-To: RParker@weather.com
Subject: Re: ATA Atapi Cdrom Problems
To: John Prince <johnp@vwebpage.com>


John Baldwin replied:
> Yes, we had some problems here with some 56x CD-ROM drives that were
> having problems with READ_BIG timing out.  It was always on the same
> file as well.  The same CD worked fine in other CD-ROM's.

I disagree that newer drives seem to work.  Both of the drives we've had
trouble
with arrived in new computers last week.

The 52x AOpen CD-952E/AKH and an AOpen CD-956E/AKH both suffer
READ_BIG failures on FreeBSD installation.

Mitsumi 56x CD readers work fine on the same CD.

- Randy J. Parker






                      John Prince

                      <johnp@vwebpage.com>          To:
freebsd-stable@freebsd.org
                      Sent by:                      cc:

                      owner-freebsd-stable@         Subject: ATA Atapi Cdrom
Problems
                      FreeBSD.ORG





                      06/09/2002 05:48 PM









Hello.
I have seen a few threads with regards to having a problem with
ATAPI cdroms, on 4.6.rcx, and I also have the same problems..

I have several different hardware configurations that I have tested this
with, as well as versions..
4.5 was the last version that worked across the board..
4.6 RC2 and RC3 both have the exact same problem reading
cdroms, both commercial and inhouse burned..
Newer drives appear to work. I have several ACER and Toshiba
40X and 52X that refuse to read (beyond a directory listing).

Error:  READ_BIG command timeout - reseting

It appears this problem began after ATA was mfc..
Not sure why there is not more noise with regards to this, however
I do agree it to be a "Major Problem".

--john


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message





----- End forwarded message -----


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1023738994.3d0504725e43f>