Date: Fri, 10 Jul 1998 02:07:31 -0500 (CDT) From: Kevin Day <toasty@home.dragondata.com> To: hasty@rah.star-gate.com (Amancio Hasty) Cc: multimedia@FreeBSD.ORG Subject: Re: bt848 driver will be checked in this Friday Message-ID: <199807100707.CAA16376@home.dragondata.com> In-Reply-To: <199807070553.WAA00729@rah.star-gate.com> from Amancio Hasty at "Jul 6, 98 10:53:46 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> > The latest Bt848 driver available from > ftp://rah.star-gate.com/pub/bt848.tar.gz > > is going to be checked in this Friday . If the driver does not > recognize properly your card now is good time to yell about it. > I've got a Hauppage card (model 404)... antenna/cable in, and composite video in... I can't seem to make it work though.. Setting it to 'Tuner' produces static on all channels, although i can tell it's actually changing channels because of the noise changing on certain numbers... setting it to 'Video' produces a blue screen, no more. What do I do first to start debugging it? It sees it as a 'Hauppauge WinCast/TV, Phillips NTSC tuner.'. Jul 10 01:19:52 xhost /kernel: FreeBSD 2.2.6-RELEASE #0: Fri Jul 10 01:18:25 CDT 1998 Jul 10 01:19:52 xhost /kernel: root@xhost.dragondata.com:/usr/src/sys/compile/XHOST Jul 10 01:19:52 xhost /kernel: Calibrating clock(s) ... i586 clock: 165768813 Hz, i8254 clock: 1193035 Hz Jul 10 01:19:52 xhost /kernel: CLK_USE_I8254_CALIBRATION not specified - using default frequency Jul 10 01:19:52 xhost /kernel: CLK_USE_I586_CALIBRATION not specified - using old calibration method Jul 10 01:19:52 xhost /kernel: CPU: Pentium (165.79-MHz 586-class CPU) Jul 10 01:19:52 xhost /kernel: Origin = "GenuineIntel" Id = 0x52c Stepping=12 Jul 10 01:19:52 xhost /kernel: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> Jul 10 01:19:52 xhost /kernel: real memory = 33554432 (32768K bytes) Jul 10 01:19:52 xhost /kernel: Physical memory chunk(s): Jul 10 01:19:52 xhost /kernel: 0x00001000 - 0x0009efff, 647168 bytes (158 pages) Jul 10 01:19:52 xhost /kernel: 0x0022c000 - 0x01ffdfff, 31268864 bytes (7634 pages) Jul 10 01:19:52 xhost /kernel: avail memory = 30687232 (29968K bytes) Jul 10 01:19:52 xhost /kernel: pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x80000058 Jul 10 01:19:52 xhost /kernel: pcibus_setup(1a): mode1res=0x80000000 (0x80000000) Jul 10 01:19:52 xhost /kernel: pcibus_check: device 0 is there (id=12508086) Jul 10 01:19:52 xhost /kernel: Probing for devices on PCI bus 0: Jul 10 01:19:52 xhost /kernel: configuration mode 1 allows 32 devices. Jul 10 01:19:52 xhost /kernel: chip0 <Intel 82439> rev 3 on pci0:0:0 Jul 10 01:19:52 xhost /kernel: chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0 Jul 10 01:19:52 xhost /kernel: I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks Jul 10 01:19:52 xhost /kernel: Extended BIOS: disabled Jul 10 01:19:52 xhost /kernel: Lower BIOS: disabled Jul 10 01:19:52 xhost /kernel: Coprocessor IRQ13: enabled Jul 10 01:19:52 xhost /kernel: Mouse IRQ12: enabled Jul 10 01:19:52 xhost /kernel: Interrupt Routing: A: disabled, B: disabled, C: IRQ15, D: IRQ11 Jul 10 01:19:52 xhost /kernel: MB0: , MB1: Jul 10 01:19:52 xhost /kernel: chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1 Jul 10 01:19:52 xhost /kernel: mapreg[20] type=1 addr=0000f000 size=0010. Jul 10 01:19:52 xhost /kernel: Primary IDE: enabled Jul 10 01:19:52 xhost /kernel: Secondary IDE: disabled Jul 10 01:19:52 xhost /kernel: bktr0 <BrookTree 878> rev 2 int a irq 11 on pci0:17:0 Jul 10 01:19:52 xhost /kernel: mapreg[10] type=0 addr=e1001000 size=1000. Jul 10 01:19:52 xhost /kernel: reg16: virtual=0xf4363000 physical=0xe1001000 size=0x1000 Jul 10 01:19:52 xhost /kernel: brooktree0: PCI bus latency is 32. Jul 10 01:19:52 xhost /kernel: bktr0: buffer size 3555328, addr 0x431000 Jul 10 01:19:53 xhost /kernel: bktr: GPIO is 0x00fffffb Jul 10 01:19:53 xhost /kernel: Hauppauge WinCast/TV, Philips NTSC tuner. Jul 10 01:19:53 xhost /kernel: pci0:17:1: vendor=0x109e, device=0x0878, class=multimedia (misc) int a irq 11 [no driver assigned] Jul 10 01:19:53 xhost /kernel: map(10): mem32(e1000008) Jul 10 01:19:53 xhost /kernel: vga0 <VGA-compatible display device> rev 65 int a irq 15 on pci0:18:0 Jul 10 01:19:53 xhost /kernel: mapreg[10] type=0 addr=e0000000 size=1000000. Jul 10 01:19:53 xhost /kernel: pci0: uses 16781312 bytes of memory from e0000000 upto e1001fff. Jul 10 01:19:53 xhost /kernel: pci0: uses 16 bytes of I/O space from f000 upto f00f. Kevin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199807100707.CAA16376>