Date: Thu, 2 Sep 1999 23:41:48 -0600 From: Greg Skafte <skafte@worldgate.com> To: freebsd-stable@freebsd.org Cc: grog@lemis.com Subject: Vinum Kernel panic Message-ID: <19990902234148.A74752@valis.worldgate.ca>
next in thread | raw e-mail | index | archive | help
I just cvsuped Freebsd RELENG_3 this evening and vinum cause the following: Kernel Panic Fatal trap 12 page Fault while in kernel mode Fault Virtual address= 0x10 Fault Code = supervisor read, page not present Instruction Pointer = 0x8:0xc128a8bb Stack Pointer = 0x10: 0xcc1e5c40 Frame Pointer = 0x10: 0xcc1e5c94 Code Segment = base 0x0, limit 0xffff, type 0x1b = DPL 0, pres 1, def 321, gran 1 Processor eflags = int enabled, resume IOPL 0 Current Process = 16 (vinum) interupt mask = trap number = 12 Panic: page fault ----------------------Kerenel conf -------------------------- # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143.2.9 1999/04/19 20:11:32 n_hibma Exp $ machine "i386" cpu "I586_CPU" cpu "I686_CPU" ident NEMISIS maxusers 64 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console #options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio flags 0xe0ffe0ff irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio flags 0xe0ffe0ff irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 #controller ahb0 #controller ahc0 #controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? # #controller scbus0 #device da0 #device sa0 #device pass0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? net irq 7 controller ppbus0 device nlpt0 at ppbus? #device plip0 at ppbus? #device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) device mx0 # Macronix 98713/98715/98725 (``PMAC'') device pn0 # Lite-On 82c168/82c169 (``PNIC'') device rl0 # RealTek 8129/8139 device tl0 # Texas Instruments ThunderLAN device tx0 # SMC 9432TX (83c170 ``EPIC'') device vr0 # VIA Rhine, Rhine II device vx0 # 3Com 3c590, 3c595 (``Vortex'') device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether #pseudo-device sl 1 #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 4 #Berkeley packet filter options SOFTUPDATES ----------- vinum config # Vinum configuration of nemisis.worldgate.ca, saved at Thu Sep 2 23:26:02 1999 drive usr1 device /dev/wd0f drive home1 device /dev/wd0g drive usr2 device /dev/wd2s2f drive home2 device /dev/wd2s2g volume usr volume home plex name usr.p0 org striped 512b vol usr plex name home.p0 org concat vol home plex name home.p1 org concat vol home sd name usr.p0.s0 drive usr1 plex usr.p0 len 2095104b driveoffset 265b plexoffset 0b sd name usr.p0.s1 drive usr2 plex usr.p0 len 2095104b driveoffset 265b plexoffset 512b sd name home.p0.s0 drive home1 plex home.p0 len 3194880b driveoffset 265b plexoffset 0b sd name home.p1.s0 drive home2 plex home.p1 len 3194880b driveoffset 265b plexoffset 0b ------------------------------------------------------------------- I pulled /* $Id: v.c,v 1.4.2.3 1999/05/05 05:11:14 grog Exp $ */ and /* $Id: vinum.c,v 1.7.2.3 1999/05/05 05:15:37 grog Exp $ etc from a back up and am having no issues. -- Email: skafte@worldgate.com Voice: +403 413 1910 Fax: +403 421 4929 #575 Sun Life Place * 10123 99 Street * Edmonton, AB * Canada * T5J 3H1 -- -- PGP 2.6.2 Key fingerprint = 42 9C 2C A8 4D 2B C9 C4 7D B6 00 B0 50 47 20 97 http://gras-varg.worldgate.com/~skafte/ http://www.worldgate.com/ -- -- When things can't get any worse, they simplify themselves by getting a whole lot worse then complicated. A complete and utter disaster is the simplest thing in the world; it's preventing one that's complex. (Janet Morris) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990902234148.A74752>