Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 19 Jul 2001 08:45:43 +0200
From:      Phil Regnauld <regnauld@starbsd.org>
To:        Nikolai Saoukh <nms+tokenring@otdel-1.org>
Cc:        freebsd-tokenring@freebsd.org
Subject:   Re: Problem with OC-3140, FreeBSD 4.3-STABLE
Message-ID:  <20010719084543.Q6167@tetard.starbsd.org>
In-Reply-To: <20010719104121.A1771@otdel-1.org>; from nms%2Btokenring@otdel-1.org on Thu, Jul 19, 2001 at 10:41:21AM %2B0400
References:  <20010718151904.L6167@tetard.starbsd.org> <20010719104121.A1771@otdel-1.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Nikolai Saoukh (nms+tokenring) writes:
> > dmesg output:
> > 	oltr0: MAC address 00:00:00:00:00:00
> 
> Rather strange value for MAC address. Looks like
> microcode does not initialized the card. Could you
> reproduce dmesg output in verbose boot mode?

	This is verbose, I just trimmed.  Here is the complete dmesg.

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Wed Jul 18 14:30:41 CEST 2001
    root@sk1.td.rh.dk:/usr/src/sys/compile/SK1
Calibrating clock(s) ... TSC clock: 730878267 Hz, i8254 clock: 1193046 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 730965692 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (730.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 133038080 (129920K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00323000 - 0x07ed7fff, 129716224 bytes (31669 pages)
avail memory = 126459904 (123496K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fd510
bios32: Entry = 0xfd521 (c00fd521)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xd55c
pnpbios: Found PnP BIOS data at 0xc00fdf90
pnpbios: Entry = f0000:4830  Rev = 1.0
Other BIOS signatures found:
ACPI: 000fdfe0
Preloaded elf kernel "kernel" at 0xc02fd000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000054
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=11308086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=11308086)
pcib0: <Host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x1130, revid=0x02
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x1132, revid=0x02
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base f8000000, size 26
	map[14]: type 1, range 32, base fea80000, size 19
found->	vendor=0x8086, dev=0x244e, revid=0x01
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x8086, dev=0x2440, revid=0x01
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x244b, revid=0x01
	class=01-01-80, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 0000fff0, size  4
found->	vendor=0x8086, dev=0x2442, revid=0x01
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=10
	map[20]: type 1, range 32, base 0000fb00, size  5
found->	vendor=0x8086, dev=0x2443, revid=0x01
	class=0c-05-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=9
	map[20]: type 1, range 32, base 0000fe00, size  4
found->	vendor=0x8086, dev=0x2445, revid=0x01
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=9
	map[10]: type 1, range 32, base 0000f000, size  8
	map[14]: type 1, range 32, base 0000f400, size  6
pci0: <PCI bus> on pcib0
pci0: <Intel model 1132 VGA-compatible display device> (vendor=0x8086, dev=0x1132) at 2.0 irq 11
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
found->	vendor=0x8086, dev=0x2449, revid=0x01
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=5
	map[10]: type 1, range 32, base febfb000, size 12
	map[14]: type 1, range 32, base 00007880, size  6
found->	vendor=0x108d, dev=0x0004, revid=0x03
	class=02-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base 000078c0, size  6
	map[14]: type 1, range 32, base febfc000, size 14
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro/100 Ethernet> port 0x7880-0x78bf mem 0xfebfb000-0xfebfbfff irq 5 at device 8.0 on pci1
fxp0: using memory space register mapping
fxp0: Ethernet address 00:02:55:74:5f:f4
fxp0: PCI IDs: 8086 2449 1014 01ce 0001
fxp0: Chip Type: 0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
oltr0: <Olicom RapidFire 3140 16/4 PCI Adapter (OC-3140)> port 0x78c0-0x78ff mem 0xfebfc000-0xfebfffff irq 10 at device 14.0 on pci1
oltr0: MAC address 00:00:00:00:00:00
oltr0: adapter memory block size 4332 bytes
bpf: oltr0 attached
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xfff0-0xffff at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfff0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfff8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=7f b=7f
ata1: mask=03 status0=00 status1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> (vendor=0x8086, dev=0x2442) at 31.2 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 9
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xcd7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0045
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fdfe3f 0..1021=1022 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
ata0-master: success setting UDMA5 on Intel chip
Creating DISK ad0
ad0: <Maxtor 32049H2/YAH814Y0> ATA-6 disk at ata0-master
ad0: 19470MB (39876480 sectors), 39560 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ad0: 19470MB <Maxtor 32049H2> [39560/16/63] at ata0-master UDMA100
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <LTN485S/JU03> CDROM drive at ata1 as master
acd0: read 8268KB/s (8268KB/s), 120KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 10426184, size 10426122 : OK
ad0s2: type 0xa5, start 10426185, end = 30892994, size 20466810 : OK
start_init: trying /sbin/init
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xfb00-0xfb1f irq 10 at device 31.2 on pci0
	using shared irq10.
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Linux-ELF exec handler installed

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-tokenring" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010719084543.Q6167>