Date: Wed, 5 Sep 2001 00:48:37 +0200 From: Bernd Walter <ticso@mail.cicely.de> To: Wilko Bulte <wkb@freebie.xs4all.nl> Cc: Diego Montalvo <dmontal2@yahoo.com>, freebsd-alpha@FreeBSD.ORG Subject: Re: Installed FreeBSD but cpu error? Message-ID: <20010905004837.C13647@cicely20.cicely.de> In-Reply-To: <20010904192407.C5781@freebie.xs4all.nl>; from wkb@freebie.xs4all.nl on Tue, Sep 04, 2001 at 07:24:07PM %2B0200 References: <20010904023646.46809.qmail@web13407.mail.yahoo.com> <20010904192407.C5781@freebie.xs4all.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Sep 04, 2001 at 07:24:07PM +0200, Wilko Bulte wrote: > On Mon, Sep 03, 2001 at 07:36:46PM -0700, Diego Montalvo wrote: > > Hello, > > > > I am using kern.flp 5.0-20010721 and mfsroot.flp > > 5.0-20010721 to boot and pre-install FreeBSD. 5.0x is > > the only boot disk that has been successful with my > > AS5305. > > > > I am using FreeBSD 4.3-20010822 STABLE as install > > CD-ROM, all works well during install. I have gone > > into the "emergency holographic shell" before reboot > > in order to add the 5.0 Kernel from floppy. (Andrew > > Gallatin's instructions) > > > > During reboot (10..9..8..7) countdown I hit space bar > > and load "kernel.x from 5.0-20010721" > > > > It now goes further than before, but still: PANICS... > > > > > > panic: cpu_initclocks: no clock attached > > Sounds like a bug in the support for this particular machine type to me. > Drew is not online this week, he can probably tell you I'm also seeing reboot problems with an axppci33 system and a recent -current. But I did not report, because I have some other problems too and wasn't able to isolate. A cold boot or after init works fine. It wait forever at the Boot: until I type enter. I have no clue what filename it wants there and it does not ask after an init. # reboot Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 1 1 done Uptime: 7h30m39s Rebooting... halted CPU 0 halt code = 5 HALT instruction executed PC = fffffc0000562e20 *** no timer interrupts on CPU 0 *** CPU 0 booting *** keyboard not plugged in... (boot dka0.0.0.6.0 -flags 0) block 0 of dka0.0.0.6.0 is a valid boot block reading 15 blocks from dka0.0.0.6.0 bootstrap code read in base = 110000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 102000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Boot: Loading *** keyboard not plugged in... Can't open file halted CPU 0 halt code = 5 HALT instruction executed PC = 20000038 boot failure >>>iu iu: No such command >>>init *** keyboard not plugged in... starting console on CPU 0 initialized idle PCB initializing semaphores initializing heap initial heap 1c0c0 memory low limit = 100000 heap = 1c0c0, 17fc0 initializing driver structures initializing idle process PID XDELTA not enabled. initializing file system initializing 8259s initializing timer data structures lowering IPL CPU 0 speed is 5.98 ns (167MHz) Powerup process has started CPU ID = 0 Initialize configuration locks etc. Configure the memory Initialising ISA/PCI interrupts. Configure the PCI Bus Start tt class, port (graphics, keyboard, then serial) drivers entering idle loop change stdin/out/err channels from nl to tt Memory size = 32Mbytes testing memory from 800000 to 1e16000 ... Start driver phase 4 access NVRAM Build this processor's slot in the hwrpb Backup Cache size = 0Kb Init SCSI class driver Start driver phase 5 AXPpci33 Common Console X4.7-1860, built on Nov 1 1996 at 06:00:01 CPU 0 booting (boot dka0.0.0.6.0 -flags 0) block 0 of dka0.0.0.6.0 is a valid boot block reading 15 blocks from dka0.0.0.6.0 bootstrap code read in base = 110000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 102000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Loading /boot/loader *** no timer interrupts on CPU 0 *** *** keyboard not plugged in... Console: SRM firmware console VMS PAL rev: 0x1000400010538 OSF PAL rev: 0x100090002012d Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 1.1 (ticso@cicely9.cicely.de, Tue Aug 21 15:40:53 CEST 2001) Memory: 32768 k [...] -- B.Walter COSMO-Project http://www.cosmo-project.de ticso@cicely.de Usergroup info@cosmo-project.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010905004837.C13647>