Date: Mon, 26 Aug 2002 23:01:35 -0400 From: Andy Sparrow <spadger@best.com> To: Ross Finlayson <finlayson@live.com> Cc: Andy Sparrow <spadger@best.com>, freebsd-multimedia@FreeBSD.ORG Subject: Re: Configuring for the Compaq Presario 7360 audio device? Message-ID: <20020827030135.1D5A44D6@CRWdog.demon.co.uk> In-Reply-To: Message from Ross Finlayson <finlayson@live.com> of "Mon, 26 Aug 2002 17:58:12 PDT." <4.3.1.1.20020826175718.00bd1160@laptop-localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
--==_Exmh_-548325659P Content-Type: text/plain; charset=us-ascii > At 05:34 PM 8/26/02, Andy Sparrow wrote: > > > > > I tried this, but unfortunately the kernel wedged during booting (at > > "ppi0: > > > > <Parallel I/O> on ppbus0"). > > > >Hmm. You have anything else claiming that interrupt? > > I don't think so. > pci_cfgintr_search: linked (2) to configured irq 3 at 0:8:0 > pci_cfgintr: 0:9 INTA routed to irq 3 > pcic0: <TI PCI-1225 PCI-CardBus Bridge> irq 3 at device 9.0 on pci0 This looks kind of strange. And it prevents your 2nd serial port (sio1) from working too. I thought everything on the PC card controller side used shared interrupts now, typically on irq 10. Did you have to frob anything to get it working? Hmm. I don't really know what the current state of the pcic support is (mine Just Works), but I know some people with TI chipsets have problems. I /think/ that in that case you might need: hw.pcic.intr_path=1 hw.pcic.irq=0 in your /boot/loader.conf, but I'm not really the person to ask about this stuff. Warner is, and he tends to hang out over on -mobile. > pcic0: PCI Memory allocated: 0x88000000 > pcic0: TI12XX PCI Config Reg: [pwr save][pci only] > pccard0: <PC Card bus (classic)> on pcic0 > chip1: <Texas Instruments PCI1225 CardBus controller> at device 9.1 on pci0 > bktr0: <BrookTree 878> mem 0x41200000-0x41200fff irq 10 at device 10.0 on pci0 > bktr0: Hauppauge Model 44811 C133 > bktr0: Warning - Unknown Hauppauge Tuner 0x21 > bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. > pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 10.1 irq 10 > pci0: <unknown card> (vendor=0x125d, dev=0x1988) at 13.0 irq 5 ... > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 ... > wi0 at port 0x240-0x27f irq 3 slot 0 on pccard0 Of course, the other approach is to disable devices and/or remove cards and check the sound stuff with as close to a "bare" machine as possible, and see if that works. If it does, add stuff back slowly until you find what is causing the issue, and then figure out why :-/ If it doesn't, try some alternative hardware - it's cheap enough.. :-) Cheers, AS --==_Exmh_-548325659P Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (FreeBSD) Comment: Exmh version 2.5 07/13/2001 iD8DBQE9auuOPHh895bDXeQRAjDNAJwM5EXCZTzRiFNIqSXzZn+pZjxbVgCeOxDD YNxdNC0sWv+EiZ4QJvmZSzY= =B8rM -----END PGP SIGNATURE----- --==_Exmh_-548325659P-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020827030135.1D5A44D6>