Date: Tue, 11 Feb 2003 15:59:44 +0530 From: Shantanu Mahajan <shantanoo+fbsd@ieee.org> To: Darren Spruell <darren_spruell@sento.com> Cc: freebsd-questions@freebsd.org Subject: Re: X problems on i810 | AddScreen/ScreenInit failed Message-ID: <20030211102944.GB380@dhumketu.homeunix.net> In-Reply-To: <3E480B7A.3090805@sento.com> References: <20030210185635.GA694@dhumketu.homeunix.net> <3E480B7A.3090805@sento.com>
next in thread | previous in thread | raw e-mail | index | archive | help
in which file you have made changes? from the logs, you are using ./XF86Config.new Make changes in that file. Regards, Shantanu +++ Darren Spruell [10-02-03 13:28 -0700]: | Date: Mon, 10 Feb 2003 13:28:42 -0700 | From: Darren Spruell <darren_spruell@sento.com> | User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.1) Gecko/20020826 | To: Shantanu Mahajan <shantanoo+fbsd@ieee.org> | CC: freebsd-questions@freebsd.org | Subject: Re: X problems on i810 | AddScreen/ScreenInit failed | | Shantanu Mahajan wrote: | >try adding following lines | > | >in Device section | > Option "NoDDC" | > | >in Monitor section | > Option "DPMS" | > | >Regards, | >Shantanu | | Added as suggested. Relevant sections now read: | | Section "Monitor" | Identifier "Monitor0" | Option "DPMS" | VendorName "Gateway" | ModelName "EV700" | HorizSync 30 - 69 | VertRefresh 50 - 110 | EndSection | | Section "Device" | ### Available Driver options are:- | ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", | ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" | ### [arg]: arg optional | #Option "ShadowFB" # [<bool>] | #Option "VGAClocks" # [<bool>] | Option "NoDDC" | Identifier "Card0" | Driver "vga" | VendorName "Intel" | BoardName "i810-dc100" | BusID "PCI:0:1:0" | EndSection | | | | Still the same error occurs. Here is the full output of the | /var/log/XFree86.0.log for this attempt: | | | | XFree86 Version 4.2.1 / X Window System | (protocol Version 11, revision 0, vendor release 6600) | Release Date: 3 September 2002 | If the server is older than 6-12 months, or if your card is | newer than the above date, look for a newer version before | reporting problems. (See http://www.XFree86.Org/) | Build Operating System: FreeBSD 5.0-CURRENT i386 [ELF] | Module Loader present | Markers: (--) probed, (**) from config file, (==) default setting, | (++) from command line, (!!) notice, (II) informational, | (WW) warning, (EE) error, (NI) not implemented, (??) unknown. | (==) Log file: "/var/log/XFree86.0.log", Time: Mon Feb 10 14:23:18 2003 | (++) Using config file: "./XF86Config.new" | (==) ServerLayout "XFree86 Configured" | (**) |-->Screen "Screen0" (0) | (**) | |-->Monitor "Monitor0" | (**) | |-->Device "Card0" | (**) |-->Input Device "Mouse0" | (**) |-->Input Device "Keyboard0" | (==) Keyboard: CustomKeycode disabled | (**) FontPath set to | "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts | /75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" | (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" | (**) ModulePath set to "/usr/X11R6/lib/modules" | (--) Using syscons driver with X support (version 2.0) | (--) using VT number 9 | | (II) Module ABI versions: | XFree86 ANSI C Emulation: 0.1 | XFree86 Video Driver: 0.5 | XFree86 XInput driver : 0.3 | XFree86 Server Extension : 0.1 | XFree86 Font Renderer : 0.3 | (II) Loader running on freebsd | (II) LoadModule: "bitmap" | (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a | (II) Module bitmap: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | Module class: XFree86 Font Renderer | ABI class: XFree86 Font Renderer, version 0.3 | (II) Loading font Bitmap | (II) LoadModule: "pcidata" | (II) Loading /usr/X11R6/lib/modules/libpcidata.a | (II) Module pcidata: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 0.1.0 | ABI class: XFree86 Video Driver, version 0.5 | (II) PCI: Probing config type using method 1 | (II) PCI: Config type is 1 | (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 | (II) PCI: PCI scan (all values are in hex) | (II) PCI: 00:00:0: chip 8086,7122 card 0000,0000 rev 03 class 06,00,00 | hdr 00 | (II) PCI: 00:01:0: chip 8086,7123 card 8086,5355 rev 03 class 03,00,00 | hdr 00 | (II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 | hdr 01 | (II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 | hdr 80 | (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 | hdr 00 | (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 | hdr 00 | (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 | hdr 00 | (II) PCI: 00:1f:5: chip 8086,2415 card 8086,5355 rev 02 class 04,01,00 | hdr 00 | (II) PCI: 01:01:0: chip 8086,1229 card 8086,3002 rev 08 class 02,00,00 | hdr 00 | (II) PCI: End of PCI scan | (II) LoadModule: "scanpci" | (II) Loading /usr/X11R6/lib/modules/libscanpci.a | (II) Module scanpci: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 0.1.0 | ABI class: XFree86 Video Driver, version 0.5 | (II) UnloadModule: "scanpci" | (II) Unloading /usr/X11R6/lib/modules/libscanpci.a | (II) Host-to-PCI bridge: | (II) PCI-to-ISA bridge: | (II) PCI-to-PCI bridge: | (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) | (II) Bus 0 I/O range: | [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] | (II) Bus 0 non-prefetchable memory range: | [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] | (II) Bus 0 prefetchable memory range: | [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] | (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x02 (VGA_EN is cleared) | (II) Bus 1 I/O range: | [0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B] | (II) Bus 1 non-prefetchable memory range: | [0] -1 0xff400000 - 0xff8fffff (0x500000) MX[B] | (II) Bus 1 prefetchable memory range: | [0] -1 0xf6a00000 - 0xf6afffff (0x100000) MX[B] | (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) | (II) Bus -1 I/O range: | (II) Bus -1 non-prefetchable memory range: | (II) Bus -1 prefetchable memory range: | (--) PCI:*(0:1:0) Intel i810-dc100 rev 3, Mem @ 0xf8000000/26, 0xffa80000/19 | (II) Addressable bus resource ranges are | [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] | [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] | (II) OS-reported resource ranges: | [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) | [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) | [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] | [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] | [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] | [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] | [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] | (II) Active PCI resource ranges: | [0] -1 0xff700000 - 0xff7fffff (0x100000) MX[B]E | [1] -1 0xff8ff000 - 0xff8fffff (0x1000) MX[B]E | [2] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B) | [3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) | [4] -1 0x0000df00 - 0x0000dfff (0x100) IX[B]E | [5] -1 0x0000ef00 - 0x0000efff (0x100) IX[B]E | [6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E | [7] -1 0x0000efa0 - 0x0000efbf (0x20) IX[B]E | [8] -1 0x0000ef80 - 0x0000efff (0x80) IX[B]E | [9] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E | (II) PCI I/O resource overlap reduced 0x0000ef00 from 0x0000efff to | 0x0000ef7f | (II) PCI I/O resource overlap reduced 0x0000ef80 from 0x0000efff to | 0x0000ef9f | (II) Active PCI resource ranges after removing overlaps: | [0] -1 0xff700000 - 0xff7fffff (0x100000) MX[B]E | [1] -1 0xff8ff000 - 0xff8fffff (0x1000) MX[B]E | [2] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B) | [3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) | [4] -1 0x0000df00 - 0x0000dfff (0x100) IX[B]E | [5] -1 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E | [6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E | [7] -1 0x0000efa0 - 0x0000efbf (0x20) IX[B]E | [8] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]E | [9] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E | (II) OS-reported resource ranges after removing overlaps with PCI: | [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) | [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) | [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] | [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] | [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] | [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] | [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] | (II) All system resource ranges: | [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) | [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) | [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] | [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] | [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] | [5] -1 0xff700000 - 0xff7fffff (0x100000) MX[B]E | [6] -1 0xff8ff000 - 0xff8fffff (0x1000) MX[B]E | [7] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B) | [8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) | [9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] | [10] -1 0x00000000 - 0x000000ff (0x100) IX[B] | [11] -1 0x0000df00 - 0x0000dfff (0x100) IX[B]E | [12] -1 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E | [13] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E | [14] -1 0x0000efa0 - 0x0000efbf (0x20) IX[B]E | [15] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]E | [16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E | (II) LoadModule: "dbe" | (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a | (II) Module dbe: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | Module class: XFree86 Server Extension | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading extension DOUBLE-BUFFER | (II) LoadModule: "dri" | (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a | (II) Module dri: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading sub module "drm" | (II) LoadModule: "drm" | (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a | (II) Module drm: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading extension XFree86-DRI | (II) LoadModule: "extmod" | (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a | (II) Module extmod: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | Module class: XFree86 Server Extension | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading extension SHAPE | (II) Loading extension MIT-SUNDRY-NONSTANDARD | (II) Loading extension BIG-REQUESTS | (II) Loading extension SYNC | (II) Loading extension MIT-SCREEN-SAVER | (II) Loading extension XC-MISC | (II) Loading extension XFree86-VidModeExtension | (II) Loading extension XFree86-Misc | (II) Loading extension XFree86-DGA | (II) Loading extension DPMS | (II) Loading extension FontCache | (II) Loading extension TOG-CUP | (II) Loading extension Extended-Visual-Information | (II) Loading extension XVideo | (II) Loading extension XVideo-MotionCompensation | (II) LoadModule: "glx" | (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a | (II) Module glx: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading sub module "GLcore" | (II) LoadModule: "GLcore" | (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a | (II) Module GLcore: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading extension GLX | (II) LoadModule: "pex5" | (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a | (II) Module pex5: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | Module class: XFree86 Server Extension | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading extension X3D-PEX | (II) LoadModule: "record" | (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a | (II) Module record: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.13.0 | Module class: XFree86 Server Extension | ABI class: XFree86 Server Extension, version 0.1 | (II) Loading extension RECORD | (II) LoadModule: "xie" | (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a | (II) Module xie: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | Module class: XFree86 Server Extension | ...skipping... | (II) VGA(0): Not using default mode "1400x1050" (insufficient memory for | mode) | (II) VGA(0): Not using default mode "700x525" (insufficient memory for mode) | (II) VGA(0): Not using default mode "1600x1024" (insufficient memory for | mode) | (II) VGA(0): Not using default mode "800x512" (insufficient memory for mode) | (II) VGA(0): Not using mode "1024x768" (no mode of this name) | (II) VGA(0): Not using mode "360x200" (no clock available for mode) | (II) VGA(0): Not using mode "320x200" (no clock available for mode) | (II) VGA(0): Not using mode "320x175" (no clock available for mode) | (--) VGA(0): Virtual size is 416x312 (pitch 416) | (**) VGA(0): Default mode "416x312": 28.3 MHz, 49.2 kHz, 73.8 Hz (D) | (II) VGA(0): Modeline "416x312" 28.32 416 432 464 576 312 312 314 | 333 doublescan -hsync -vsync | (**) VGA(0): Default mode "400x300": 28.3 MHz, 54.0 kHz, 85.8 Hz (D) | (II) VGA(0): Modeline "400x300" 28.32 400 416 448 524 300 300 302 | 315 doublescan +hsync +vsync | (**) VGA(0): Default mode "400x300": 25.2 MHz, 48.4 kHz, 72.7 Hz (D) | (II) VGA(0): Modeline "400x300" 25.19 400 428 488 520 300 318 321 | 333 doublescan +hsync +vsync | (**) VGA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) | (II) VGA(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 | 262 doublescan -hsync -vsync | (==) VGA(0): DPI set to (75, 75) | (II) Loading sub module "fb" | (II) LoadModule: "fb" | (II) Loading /usr/X11R6/lib/modules/libfb.a | (II) Module fb: vendor="The XFree86 Project" | compiled for 4.2.1, module version = 1.0.0 | ABI class: XFree86 ANSI C Emulation, version 0.1 | (II) do I need RAC? No, I don't. | (II) resource ranges after preInit: | [0] 0 0xffa80000 - 0xffafffff (0x80000) MS[B] | [1] 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B] | [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) | [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) | [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] | [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B] | [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] | [7] -1 0xff700000 - 0xff7fffff (0x100000) MX[B]E | [8] -1 0xff8ff000 - 0xff8fffff (0x1000) MX[B]E | [9] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B) | [10] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) | [11] 0 0x000a0000 - 0x000affff (0x10000) MS[B] | [12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) | [13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) | [14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] | [15] -1 0x00000000 - 0x000000ff (0x100) IX[B] | [16] -1 0x0000df00 - 0x0000dfff (0x100) IX[B]E | [17] -1 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E | [18] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E | [19] -1 0x0000efa0 - 0x0000efbf (0x20) IX[B]E | [20] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]E | [21] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E | [22] 0 0x000003b0 - 0x000003bb (0xc) IS[B] | [23] 0 0x000003c0 - 0x000003df (0x20) IS[B] | (==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear | | Fatal server error: | AddScreen/ScreenInit failed for driver 0 | | | When reporting a problem related to a server crash, please send | the full server output, not just the last messages. | This can be found in the log file "/var/log/XFree86.0.log". | Please report problems to xfree86@xfree86.org. | | | | > | >+++ Darren Spruell [freebsd] [10-02-03 11:07 -0700]: | >| Date: Mon, 10 Feb 2003 11:07:22 -0700 | >| From: Darren Spruell <darren_spruell@sento.com> | >| Subject: X problems on i810 | AddScreen/ScreenInit failed | >| | >| Greetz, | >| | >| I'm trying to configure v4.7 to run X but am having a hard time getting | >| the server to start. | >| | >| I've followed the config instructions at | >| http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html | >| by doing the following steps: | >| | >| Run XFree86 -configure | >| to create the default XF86Config.new | >| Run XFree86 -xf86config ./XF86Config.new | >| to ensure that it works w/my hardware | >| Edit it to taste, to change specifics for HorizSync, VertRefresh, and | >| the Display subsection under "Screen". | >| | >| However, running 'XFree86 -xf86config ./XF86Config.new' after changing | >| my config does not work. The output error is: | >| | >| ====================================================================== | >| (==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear | >| | >| Fatal server error: | >| AddScreen/ScreenInit failed for driver 0 | >| ====================================================================== | >| | >| I followed through the part in the Advanced Configuration section about | >| adding in support for agpgart and created the device node and added the | >| following to /boot/loader.conf: | >| agp_load="YES" | >| | >| dmesg now shows: | >| Preloaded elf module "agp.ko" at 0xc051a09c. | >| agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem | >| 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0 | >| | >| Here is the current XF86Config.new (non-working). The Monitor section | >| was taken from a specs page on the Monitor (Gateway EV700). Full dmesg | >| included below this: | >| | >| Section "ServerLayout" | >| Identifier "XFree86 Configured" | >| Screen 0 "Screen0" 0 0 | >| InputDevice "Mouse0" "CorePointer" | >| InputDevice "Keyboard0" "CoreKeyboard" | >| EndSection | >| | >| Section "Files" | >| RgbPath "/usr/X11R6/lib/X11/rgb" | >| ModulePath "/usr/X11R6/lib/modules" | >| FontPath "/usr/X11R6/lib/X11/fonts/misc/" | >| FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" | >| FontPath "/usr/X11R6/lib/X11/fonts/Type1/" | >| FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" | >| FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" | >| EndSection | >| | >| Section "Module" | >| Load "dbe" | >| Load "dri" | >| Load "extmod" | >| Load "glx" | >| Load "pex5" | >| Load "record" | >| Load "xie" | >| Load "xtrap" | >| Load "speedo" | >| Load "type1" | >| EndSection | >| | >| Section "InputDevice" | >| Identifier "Keyboard0" | >| Driver "keyboard" | >| EndSection | >| | >| Section "InputDevice" | >| Identifier "Mouse0" | >| Driver "mouse" | >| Option "Protocol" "MouseSystems" | >| Option "Device" "/dev/sysmouse" | >| EndSection | >| | >| Section "Monitor" | >| Identifier "Monitor0" | >| VendorName "Gateway" | >| ModelName "EV700" | >| HorizSync 30 - 69 | >| VertRefresh 50 - 110 | >| EndSection | >| | >| Section "Device" | >| ### Available Driver options are:- | >| ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", | >| ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" | >| ### [arg]: arg optional | >| #Option "ShadowFB" # [<bool>] | >| #Option "VGAClocks" # [<bool>] | >| Identifier "Card0" | >| Driver "vga" | >| VendorName "Intel" | >| BoardName "i810-dc100" | >| BusID "PCI:0:1:0" | >| EndSection | >| | >| Section "Screen" | >| Identifier "Screen0" | >| Device "Card0" | >| Monitor "Monitor0" | >| DefaultDepth 16 | >| SubSection "Display" | >| Depth 16 | >| Modes "1024x768" | >| EndSubSection | >| EndSection | >| | >| Copyright (c) 1992-2002 The FreeBSD Project. | >| Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | >| The Regents of the University of California. All rights | >reserved. | >| FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002 | >| root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC | >| Timecounter "i8254" frequency 1193182 Hz | >| CPU: Pentium III/Pentium III Xeon/Celeron (697.88-MHz 686-class CPU) | >| Origin = "GenuineIntel" Id = 0x686 Stepping = 6 | >| | >| | >Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> | >| real memory = 267124736 (260864K bytes) | >| avail memory = 254693376 (248724K bytes) | >| Preloaded elf kernel "kernel" at 0xc051a000. | >| Preloaded elf module "agp.ko" at 0xc051a09c. | >| Pentium Pro MTRR support enabled | >| md0: Malloc disk | >| Using $PIR table, 11 entries at 0xc00f35a0 | >| npx0: <math processor> on motherboard | >| npx0: INT 16 interface | >| pcib0: <Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge> on | >| motherboard | >| pci0: <PCI bus> on pcib0 | >| agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem | >| 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0 | >| pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 | >| pci1: <PCI bus> on pcib1 | >| fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem | >| 0xff700000-0xff7fffff,0xff8ff000-0xff8fffff irq 3 at device 1.0 on pci1 | >| fxp0: Ethernet address 00:03:47:0b:0e:20 | >| inphy0: <i82555 10/100 media interface> on miibus0 | >| inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto | >| isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 | >| isa0: <ISA bus> on isab0 | >| atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 | >| on pci0 | >| ata0: at 0x1f0 irq 14 on atapci0 | >| ata1: at 0x170 irq 15 on atapci0 | >| uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at | >| device 31.2 on pci0 | >| usb0: <Intel 82801AA (ICH) USB controller> on uhci0 | >| usb0: USB revision 1.0 | >| uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 | >| uhub0: 2 ports with 2 removable, self powered | >| pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9 | >| chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port | >| 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0 | >| orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xccfff on isa0 | >| fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 | >| fdc0: FIFO enabled, 8 bytes threshold | >| fd0: <1440-KB 3.5" drive> on fdc0 drive 0 | >| atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 | >| atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 | >| kbd0 at atkbd0 | >| psm0: failed to get data. | >| psm0: <PS/2 Mouse> irq 12 on atkbdc0 | >| psm0: model IntelliMouse, device ID 3 | >| vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 | >| sc0: <System console> at flags 0x100 on isa0 | >| sc0: VGA <16 virtual consoles, flags=0x300> | >| sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 | >| sio0: type 16550A | >| sio1: configured irq 3 not in bitmap of probed irqs 0 | >| ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 | >| ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode | >| ppc0: FIFO with 16/16/8 bytes threshold | >| plip0: <PLIP network interface> on ppbus0 | >| lpt0: <Printer> on ppbus0 | >| lpt0: Interrupt-driven port | >| ppi0: <Parallel I/O> on ppbus0 | >| ad0: 14324MB <QUANTUM FIREBALLlct15 15> [29104/16/63] at ata0-master | >UDMA66 | >| acd0: MODE_SENSE_BIG trying to write on read buffer | >| acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04 | >| acd0: CDROM <CD-224E> at ata1-slave PIO4 | >| Mounting root from ufs:/dev/ad0s1a | >| WARNING: / was not properly dismounted | >| | >| | >| THANKS IN ADVANCE!!! | >| | >| - -- | >| Darren Spruell | >| Sento IS Department | >| darren_spruell@sento.com | >| | >| ------------------------------ | >| | >| End of questions-digest V5 #1894 | >| ******************************** | >| | >| To Unsubscribe: send mail to majordomo@FreeBSD.org | >| with unsubscribe freebsd-questions-digest in the body of the message | > | | -- | Darren Spruell | Sento IS Department | darren_spruell@sento.com | -- Everyone is a genius. It's just that some people are too stupid to realize it. PGP keyID 137AFD9E (C7DA 3350 1DEA F371 37DC D92A F0D4 C2ED 137A FD9E) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030211102944.GB380>