Date: Wed, 20 Oct 2004 07:53:28 -0700 (PDT) From: "Yong Chu Eu (杨子佑)" <ceyong@yahoo.com> To: Mark Tinguely <tinguely@casselton.net>, freebsd-net@freebsd.org Subject: Re: multicast problem in vls on freebsd 4.10 Message-ID: <20041020145328.64288.qmail@web54608.mail.yahoo.com> In-Reply-To: <200410201402.i9KE2xSG054852@casselton.net>
next in thread | previous in thread | raw e-mail | index | archive | help
i am try to stream from freeBSD multicast router(without kame but with
pim6sd,route6d)to MN throught Access Point which are redhat. There is a
bridge between eth0 and wlan0 at software Access Point. There problem is i
cannot even start streaming from vls, the error message i paste as below .
I can do streaming on IPV4/IPv6 unicast.
|
192.168.1.1
3ffe:80f0:ff03:1::1
fxp0
FreeBSD 4.10 Router(Vls Server 0.5.6)
vr0 rl0
192.168.2.1 192.168.3.1
3ffe:80f0:ff03:2::1 3ffe:80f0:ff03:3::1
| |
| |
| |
eth0 eth0
3ffe:80f0:ff03:2::2 3ffe:80f0:ff03:3::2
192.168.2.2 192.168.3.2
Linux PC Access Point Linux PC Access Point
(HOSTAP 0.13) (HOSTAP 0.13)
| |
| |
br0 br0
192.168.2.3 192.168.3.3
3ffe:80f0:ff03:2::3 3ffe:80f0:ff03:3::3
| |
| |
wlan0 wlan0
192.168.2.4 192.168.3.4
essid:mipv6a essid:mipv6b
----
| MN |
----
Roaming notebook (VLC player 0.7.2)
Linux Kernel 2.4.22 with MIPL 1.0
(Dlink Wireless Card with acx100 driver)
192.168.4.1(Home address 3ffe:80d0:ff03:4::1)
mipv6 at vls> start matrix multicast local1 --loop
Provider: Manager
Error: -1
Provider: local1
Error: -1
Info: Unable to start program matrix
Info: Error: unable to start streaming of program matrix
Error: Unable to
create thread
Error: Unable to init streamer
Error: Net6Output
initialisation failed
Error: Unable to change value for option 12:
Can't assign requested address
mipv6 at vls> Connection closed by foreign host.
2004-10-05 19:48:10 [ERROR/local1] Unable to start program matrix
2004-10-05 19:48:10 [ERROR/local1] Error: unable to start streaming of
program matrix
Error: Unable to create thread
Error: Unable to init streamer
Error: Net6Output initialisation failed
Error: Unable to change value for option 12: Can't assign requested
address
pure virtual method called
Abort (core dumped)
# Application wide settings
BEGIN "Vls"
LogFile = "vls.log" # log file
ScreenLog = "enable" # log to the console
SystemLog = "disable" # log to the systemlog
END
# Security informations :
#
# The section "Groups" describes which group is allowed to use which
command.
# Each user who belongs to the 'master" group has all the power on the
server.
# Each one who belongs to the "monitor" group is a "read-only" user.
BEGIN "Groups"
# --- Format:
# groupname = "cmd1|cmd2|..."
# --- Example:
monitor = "help|browse|logout"
master =
"help|browse|start|resume|suspend|stop|shutdown|logout|config|program|input|channel|show"
END
# The section "Users" describes each user
# Use "mkpasswd" to generate the encrypted password.
BEGIN "Users"
# --- Format:
# username = "encryptedpassword:group"
# --- Example:
ceyong = "3BcKWoiQn0vi6:monitor" # password is 'monitor'
mipv6 = "JKg2TpPerilnw:master" # password is 'bozo'
END
# Telnet Administration
BEGIN "Telnet"
# Domain = "Inet6" # Inet4 or Inet6
LocalPort = "9999" # Port to use for that purpose
Use = "true"
END
# Streams sources declaration
BEGIN "Inputs"
# --- Format:
# InputName = "Type"
# --- Example:
local1 = "local" # Local input example
# kfir = "video" # Video input example (mpeg
encoder)
# dvb = "dvb" # Video input example (DVB card)
END
#BEGIN "local1"
# ConfigPath = "/usr/local/etc/videolan/vls"
#END
# --- Format:
# BEGIN "program_number"
# Name = "program_name"
# Type = "type" # can be Mpeg1-PS, Mpeg2-PS, Mpeg2-TS, or
Dvd
# FileName = "path" # use this variable if Type is not "Dvd"
# Device = "device" # use this variable with type "Dvd"
# END
# --- Example:
#BEGIN "1" # DVD
# Name = "film"
# Device = "/dev/cdrom"
# Type = "dvd"
# DvdTitle = "2" # Start title
# DvdChapter = "1" # Start chapter
#END
BEGIN "Input"
FilesPath = "/usr/src"
ProgramCount = "1"
END
BEGIN "1" # DVD stored on a hard disk
Name = "matrix"
FileName = "/usr/src/true.mpeg"
Type = "Mpeg1-PS"
# DvdTitle = "1" # Start title
# DvdChapter = "1" # Start chapter
END
# Video input configuration
BEGIN "kfir"
# --- Example:
# Device = "/dev/video" # Video4linux device (default is
/dev/video)
# Type = "Mpeg2-PS" # Stream type (default is "Mpeg2-PS")
END
# Video input (DVB) configuration
BEGIN "dvb"
# --- Example:
# DeviceNumber = "0" # /dev/dvb/adapter<i>
# SendMethod = "0" # 0 - Send All Pids
# 1 - Send only MPEG2 datas
END
# Channel (outputs) declaration
BEGIN "Channels"
# --- Format:
# ChannelName = "Type"
# --- Example:
localhost = "network"
client1 = "network"
unicast = "network"
multicast = "network"
# localfile = "file"
END
# Channels configuration
BEGIN "localhost" # The client is on the same host as the server
DstHost = "127.0.0.1"
DstPort = "1234"
END
BEGIN "client1" # unicast example
DstHost = "192.168.3.4" # destination host
DstPort = "1234" # destination port
END
#BEGIN "client2" # unicast with IPv6 example
# Domain = "inet6"
# DstHost = "3ffe:ffff::2:12:42" # destination host
# DstPort = "1234" # destination port
#END
BEGIN "unicast" # unicast with IPv6 example
Domain = "inet6"
DstHost = "3ffe:80d0:ff03:4::1" # destination host
DstPort = "1234" # destination port
END
BEGIN "multicast"
Domain ="inet6" # multicast example
Type = "multicast"
TTL = "128" # Time To Live
DstHost = "ff6e:1:1:1::2222" # multicast address
DstPort = "1234" # destination port
END
#BEGIN "localfile" # file output example
# FileName = "stream.ts"
# Append = "no" # rewrite the file if it exists
#END
# Commands automatically lanched on Startup
# Commands shall be like they would be typed in a telnet console.
BEGIN "LaunchOnStartUp"
# command1 = "start dolby localhost local1 --loop"
# command2 = "start 28009 client1 dvb"
END
--- Mark Tinguely <tinguely@casselton.net> wrote:
>
> on Tue, 19 Oct 2004 03:41:08 -0700 (PDT), Yong Chu Eu <ceyong@yahoo.com>
> asked:
>
> > When i install freeBSD 4.10 without kame code, my multicast function
> on
> > router fail. i try to stream multicast video(vls) from router to vlc
> > player at client?
>
> You may need to provide more information:
>
> How is your network configured?
> Is there a router or switch between the FreeBSD machine and the
> client?
> multicast packets are not passed by routers.
> some smart switches require enabling of multicast/IGMP on the ports.
>
> What Ethernet card are you using?
>
> Have you used tcpdump on the FreeBSD machine and/or a Windows Ethernet
> snooper to verify multicast/IGMP traffic?
>
> --Mark Tinguely tinguely@casselton.net
>
=====
愿您永远幸福，快乐和安详 Happy & Healthy Always ! ^_^ !
个人网页 Homepage:http://planet.time.net.my/sunwaycity/ceyong
个人佛学网页 Buddhist Page: http://planet.time.net.my/SunwayCity/ceyong/artikel.htm
ICQ:16994867/ Yahoo Messenger ID:ceyong /MSN Messenger:ceyong at hotmail.com
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041020145328.64288.qmail>