Date: Tue, 10 Jan 2006 22:27:56 -0500 From: Eero Saynatkari <freebsd-ml@magical-cat.org> To: freebsd-acpi@freebsd.org Subject: Re: acpiconf -s3 blanks and resumes immediately (Acer Aspire 5000 amd64) Message-ID: <20060111032756.GA801@yawn.magical-cat.org> In-Reply-To: <20060110234727.GA976@yawn.magical-cat.org> References: <20060110234727.GA976@yawn.magical-cat.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2006.01.10 18:47, Eero Saynatkari wrote: > HW: Acer Aspire 5000 Turion (amd64) notebook, > PHOENIX notebios > > OS: FreeBSD 6.0-stable > > > Hi! > > I have not had success resolving my particular problem; > it may be I am just not able to get the search terms > right. Links to my config etc. are at the bottom. > > ACPI loads up seemingly OK after a small tweak to the > asl (I was getting the ACPI-0438 Z007 not found errors). > The asl does still emit a warning about a reserved method > needing to return a value when compiling. The DSDT.aml is > in /boot and enabled through /boot/loader.conf > > My problem is that regardless of how I attempt to suspend > the machine (suspend button or acpiconf, console or X), > the result is always the same: the machine thinks for a > bit and then the suspend seems to work: the screen goes > blank, the backlight is turned off and the HD quiets down > but after a second or so, everything comes back on and > restores exactly as it was. It sort of seems that the > machine thinks it is being resumed immediately. I got some more data booting with verbose logging (full dmesg updated on site below). acpiconf -s 3 gives this: vga0: saving 68 bytes of video state pci0:2:7: Transition from D0 to D3 pci0:3:2: Transition from D0 to D3 pci0:4:0: Transition from D0 to D3 pci0:2:7: Transition from D3 to D0 pci0:3:2: Transition from D3 to D0 pci0:4:0: Transition from D3 to D0 ata0: reiniting channel .. ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ad0: setting PIO4 on SiS 5513 chip ad0: setting UDMA100 on SiS 5513 chip ata0: reinit done .. ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> acd0: setting PIO4 on SiS 5513 chip acd0: setting UDMA33 on SiS 5513 chip ata1: reinit done .. cbb0: [MPSAFE] atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa battery0: battery initialization start battery0: battery initialization done, tried 1 times pci0:2:7 is SiS7013 PCI audio accelerator pci0:3:2 is SiS7002 USB 2.0 EHC pci0:4:0 is SiS900 fast ethernet > I have also tried acpi.hw.disable_on_poweroff with both > 0 and 1 as the value. > > shutdown -p works fine but both acpiconf -s3 or -s4 give > the result above. acpiconf -s1 gives a message saying that > suspend was not done, acpi not ready yet. I have not tried > -s5 but I can do so if needed. > > You can see the configs at > > http://www.magical-cat.org/personal/data/freebsd-acpi > > The data there are: > > dmesg > acpidump -dt > myasl.asl > iasl myasl.asl > /boot/loader.conf > sysctl -a | grep 'hw.acpi' > sysctl -a | grep 'acpi' Now also includes dmesg with verbose logging and pciconf -lv. > Please let me know if there is any other output you need to see. E
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060111032756.GA801>