Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Jan 2006 14:24:38 +0200
From:      husnu demir <hdemir@metu.edu.tr>
To:        stable@freebsd.org
Subject:   if_bge driver problem.
Message-ID:  <20060127122438.GA1044592@metu.edu.tr>

next in thread | raw e-mail | index | archive | help
Hi,

I upgraded my pc after "2006-01-25 FreeBSD-SA-06:06.kmem" issue. After that it also upgrade the bge drivers and now it is not working. In fact my "Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002" is not working. The other bge's working properly. Most probly last update may cause that. I have been using 6-STABLE.

I also tried to look at the switch part and find out that there are CRC Errors. The errors comes just after enabling the interface on the bsd box. After that there isnt any activity. Also when I sniff the interface with tcpdump, I saw lots of packets. Most probly, the driver did not let the further comminication after bad CRCs.


Thanks for the help.


Note: Do I have to add a PR to the bug report.


Husnu Demir.

The details are follows:


root@/usr/src# dmesg 
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Fri Jan 27 10:49:49 EET 2006
    root@nrouter.cc.metu.edu.tr:/usr/obj/usr/src/sys/NON-GENERIC
ACPI APIC Table: <IntelR AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3066.79-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNTX-ID,<b14>>
  Hyperthreading: 2 logical CPUs
real memory  = 2147418112 (2047 MB)
avail memory = 2096418816 (1999 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCI-PCI bridge> mem 0xec000000-0xefffffff at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf1020000-0xf102ffff irq 48 at device 1.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:09:9b:6a:7d
bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf1000000-0xf100ffff irq 52 at device 2.0 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:04:76:f7:99:6e
bge2: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf1010000-0xf101ffff irq 56 at device 3.0 on pci3
bge2: Ethernet address: 00:10:18:00:4d:53
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0x9000-0x903f mem 0xf3040000-0xf305ffff,0xf3000000-0xf303ffff irq 28 at device 2.0 on pci4
em0: Ethernet address: 00:04:23:c2:dc:29
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x9400-0x94ff mem 0xf3060000-0xf306ffff,0xf3070000-0xf307ffff irq 32 at device 3.0 on pci4
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.12.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
mpt0: Capabilities: ( RAID-1 SAFTE )
mpt0: 0 Active Volumes (1 Max)
mpt0: 0 Hidden Drive Members (6 Max)
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x9800-0x98ff mem 0xf3080000-0xf308ffff,0xf3090000-0xf309ffff irq 33 at device 3.1 on pci4
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=1.2.12.0
mpt1: Unhandled Event Notify Frame. Event 0xa.
mpt1: Capabilities: ( RAID-1 SAFTE )
mpt1: 0 Active Volumes (1 Max)
mpt1: 0 Hidden Drive Members (6 Max)
pci0: <unknown> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb000-0xb01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf8000000-0xf80003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <network, ATM> at device 0.0 (no driver attached)
pci5: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xce000-0xcf7ff,0xd0000-0xd17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <SAMSUNG CD-ROM SC-148A/B403> at ata1-master UDMA33
Waiting 5 seconds for SCSI devices to settle
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 02R0980a S320  1 1> Fixed Processor SCSI-2 device 
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
da0 at mpt0 bus 0 target 0 lun 0
da0: <IBM-ESXS CBR073C32410ESFN DFQG> Fixed Direct Access SCSI-4 device 
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
Trying to mount root from ufs:/dev/da0s1a
Accounting enabled
bge0: link state changed to UP
fatm0: <FORE PCA200E> mem 0xf7000000-0xf71fffff irq 21 at device 0.0 on pci5
fatm0: [GIANT-LOCKED]
fatm0: ESI=00:20:48:04:f8:c3 serial=63683 hw=0x20001 sw=0x4010c
fatm0: carrier detected



root@/usr/src# less sys/i386/conf/NON-GENERIC
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.4 2005/10/28 19:21:27 jhb Exp $

machine         i386
cpu             I686_CPU
ident           NON-GENERIC

# To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         # Default places to look for devices.

# makeoptions   DEBUG=-g                # Build kernel with gdb(1) debug symbols

#options        SCHED_ULE               # ULE scheduler
options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
options         INET6                   # IPv6 communications protocols
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_DIRHASH             # Improve performance on big directories
options         MD_ROOT                 # MD is a potential root device
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_GPT                # GUID Partition Tables.
options         COMPAT_43               # Compatible with BSD 4.3 [KEEP THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.

device          apic                    # I/O APIC
options         SMP                     # Symmetric MultiProcessor Kernel

# Bus support.
device          eisa
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          atapicd         # ATAPI CDROM drives
device          atapifd         # ATAPI floppy drives
options         ATA_STATIC_ID   # Static device numbering

# SCSI Controllers
device          mpt             # LSI-Logic MPT-Fusion

# SCSI peripherals
device          scbus           # SCSI bus (required for SCSI)
device          da              # Direct Access (disks)
device          pass            # Passthrough device (direct SCSI access)
device          ses             # SCSI Environmental Services (and SAF-TE)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          vga             # VGA video card driver

# syscons is the default console driver, resembling an SCO console
device          sc

device          agp             # support several AGP chipsets

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          ppi             # Parallel port interface device


# PCI Ethernet NICs.
device          em              # Intel PRO/1000 adapter Gigabit Ethernet Card

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          bge             # Broadcom BCM570xx Gigabit Ethernet
#
device          vlan


# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          ehci            # EHCI PCI->USB interface (USB 2.0)
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          umass           # Disks/Mass storage - Requires scbus and da

# For PF
device          pf                      #PF OpenBSD packet-filter firewall
device          pflog                   #logging support interface for PF
device          pfsync                  #synchronization interface for PF

# For ALTQ
options         ALTQ
options         ALTQ_CBQ        # Class Bases Queueing
options         ALTQ_RED        # Random Early Drop
options         ALTQ_RIO        # RED In/Out
options         ALTQ_HFSC       # Hierarchical Packet Scheduler
options         ALTQ_CDNR       # Traffic conditioner
options         ALTQ_PRIQ       # Priority Queueing
options         ALTQ_NOPCC      # Required for SMP build



# ATM ayarlari
device          atm
options         NATM



# Local options.
options         DEVICE_POLLING 
options         MROUTING                # Multicast routing
options         PIM                     # Protocol Independent Multicast
options         HZ=1000
options         TTYHOG=32772
options         PANIC_REBOOT_WAIT_TIME=9







Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060127122438.GA1044592>