Date: Sun, 20 Apr 2008 15:42:36 +0200 From: Zbigniew Baniewski <zb@ispid.com.pl> To: freebsd-acpi@freebsd.org Subject: Problem with ACPI using Abit BE6-II V2.0 Message-ID: <20080420134236.GA6019@sarge.my.own.domain.no-net>
next in thread | raw e-mail | index | archive | help
According to tips found on http://www.freebsd.org/doc/en/books/handbook/acpi-debug.html I'm sending a report about problems when trying to use ACPI on Abit BE6-II V2.0, FreeBSD 7.0. When ACPI is enabled - and I've enabled it during installation - the most noticeable inconveniences are: 1. There's no top's "CPU states" anymore; all the output in that line is zeroed. The same when trying to use htop or gkrellm - no possibility to watch the CPU load. 2. There are steady problems with responsitivity of the system; even the loading of the application of moderate size (like Firefox) always are causing "momentary freezes" (f.e. mouse cursor can't be moved for a while). 3. When booted with "verbose", there are steadily error messages printed on first console: acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) None of the problems described above, when ACPI has been disabled. Link to ACPI Source Language file: ftp://ftp.ispid.com.pl/free/zb-abitbe6ii.asl --------------- dmesg output with ACPI enabled ---------------------- Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #2: Sat Apr 19 20:53:27 CEST 2008 root@sarge.my.own.domain.no-net:/usr/obj/usr/src/sys/SARGE Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f3000. Preloaded elf module "/boot/kernel/snd_emu10kx.ko" at 0xc09f3160. Preloaded elf module "/boot/kernel/sound.ko" at 0xc09f3210. Preloaded elf module "/boot/kernel/bktr.ko" at 0xc09f32bc. Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc09f3368. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09f3418. Calibrating clock(s) ... i8254 clock: 1193348 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 400911913 Hz CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> Instruction TLB: 4 KB pages, 4-way set associative, 32 entries Instruction TLB: 4 MB pages, fully associative, 2 entries Data TLB: 4 KB pages, 4-way set associative, 64 entries 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size real memory = 268369920 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000000fb2dfff, 250646528 bytes (61193 pages) avail memory = 253034496 (241 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb080 bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb520 pnpbios: Found PnP BIOS data at 0xc00fbed0 pnpbios: Entry = f0000:bf00 Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 bktr_mem: memory holder loaded snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> nfslock: pseudo-device random: <entropy source, Software, Yarrow> ACPI: RSDP @ 0x0xf70a0/0x0014 (v 0 IntelR) ACPI: RSDT @ 0x0xfff3000/0x002C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0xfff3040/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0xfff30c0/0x2311 (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x0100000C) ACPI: FACS @ 0x0xfff0000/0x0040 ACPI: BOOT @ 0x0xfff5400/0x0028 (v 1 IntelR 0x00000000 0x00000000) npx0: INT 16 interface acpi0: <IntelR AWRDACPI> on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc6d80000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 7 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, fef0000 (3) failed ACPI timer: 0/3 1/2 0/4 0/3 1/2 0/3 0/3 0/4 0/4 0/3 -> 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 12 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 12 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 14 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 14 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x4010 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x4041,0x5000-0x500f on acpi0 ACPI: Found matching pin for 0.17.INTA at func 0: 12 ACPI: Found matching pin for 0.15.INTA at func 0: 11 ACPI: Found matching pin for 0.13.INTA at func 3: 14 ACPI: Found matching pin for 0.13.INTB at func 0: 10 ACPI: Found matching pin for 0.13.INTC at func 1: 12 ACPI: Found matching pin for 0.13.INTD at func 2: 11 ACPI: Found matching pin for 0.11.INTA at func 0: 10 ACPI: Found matching pin for 0.9.INTA at func 0: 11 ACPI: Found matching pin for 0.9.INTB at func 2: 12 ACPI: Found matching pin for 0.7.INTD at func 2: 10 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x7190, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 26, enabled found-> vendor=0x8086, dev=0x7191, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 domain=0, bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 domain=0, bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 domain=0, bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type I/O Port, range 32, base 0xc000, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0) pcib0: slot 7 INTD routed to irq 10 via \\_SB_.PCI0.LNKD found-> vendor=0x8086, dev=0x7113, revid=0x02 domain=0, bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type I/O Port, range 32, base 0x5000, size 4, enabled found-> vendor=0x1102, dev=0x0004, revid=0x03 domain=0, bus=0, slot=9, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xc400, size 5, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKB:0) pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LNKB found-> vendor=0x1102, dev=0x7003, revid=0x03 domain=0, bus=0, slot=9, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xc800, size 3, enabled found-> vendor=0x1102, dev=0x4001, revid=0x01 domain=0, bus=0, slot=9, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xdb005000, size 11, enabled map[14]: type Memory, range 32, base 0xdb000000, size 14, enabled pcib0: matched entry for 0.9.INTB (src \\_SB_.PCI0.LNKA:0) pcib0: slot 9 INTB routed to irq 12 via \\_SB_.PCI0.LNKA found-> vendor=0x10b7, dev=0x9055, revid=0x30 domain=0, bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xcc00, size 7, enabled map[14]: type Memory, range 32, base 0xdb004000, size 7, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LNKD:0) pcib0: slot 11 INTA routed to irq 10 via \\_SB_.PCI0.LNKD found-> vendor=0x10b9, dev=0x5237, revid=0x03 domain=0, bus=0, slot=13, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb006000, size 12, enabled pcib0: matched entry for 0.13.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 13 INTB routed to irq 10 via \\_SB_.PCI0.LNKD found-> vendor=0x10b9, dev=0x5237, revid=0x03 domain=0, bus=0, slot=13, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=12 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb007000, size 12, enabled pcib0: matched entry for 0.13.INTC (src \\_SB_.PCI0.LNKA:0) pcib0: slot 13 INTC routed to irq 12 via \\_SB_.PCI0.LNKA found-> vendor=0x10b9, dev=0x5237, revid=0x03 domain=0, bus=0, slot=13, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb008000, size 12, enabled pcib0: matched entry for 0.13.INTD (src \\_SB_.PCI0.LNKB:0) pcib0: slot 13 INTD routed to irq 11 via \\_SB_.PCI0.LNKB found-> vendor=0x10b9, dev=0x5239, revid=0x01 domain=0, bus=0, slot=13, func=3 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=14 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb009000, size 8, enabled pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.LNKC:0) pcib0: slot 13 INTA routed to irq 14 via \\_SB_.PCI0.LNKC found-> vendor=0x1095, dev=0x3112, revid=0x01 domain=0, bus=0, slot=15, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled map[1c]: type I/O Port, range 32, base 0xdc00, size 2, enabled map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled map[24]: type Memory, range 32, base 0xdb00a000, size 9, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LNKB:0) pcib0: slot 15 INTA routed to irq 11 via \\_SB_.PCI0.LNKB found-> vendor=0x109e, dev=0x036e, revid=0x02 domain=0, bus=0, slot=17, func=0 class=04-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=12 map[10]: type Prefetchable Memory, range 32, base 0xdb00b000, size 12, enabled pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 17 INTA routed to irq 12 via \\_SB_.PCI0.LNKA found-> vendor=0x109e, dev=0x0878, revid=0x02 domain=0, bus=0, slot=17, func=1 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=12 map[10]: type Prefetchable Memory, range 32, base 0xdb00c000, size 12, enabled pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 17 INTA routed to irq 12 via \\_SB_.PCI0.LNKA agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xd8000000-0xd9ffffff pcib1: prefetched decode 0xd4000000-0xd7ffffff pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0181, revid=0xa4 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=12 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8000000, size 24, enabled pcib1: requested memory range 0xd8000000-0xd8ffffff: good map[14]: type Prefetchable Memory, range 32, base 0xd4000000, size 26, enabled pcib1: requested memory range 0xd4000000-0xd7ffffff: good pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 1 INTA routed to irq 12 via \\_SB_.PCI0.LNKA pcib1: slot 0 INTA is routed to irq 12 vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xd4000000-0xd7ffffff irq 12 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=01 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] ata1: [ITHREAD] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 10 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.3 (no driver attached) emu10kx0: <Creative Audigy (Unknown model) [SB????]> port 0xc400-0xc41f irq 11 at device 9.0 on pci0 emu10kx0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc400 emu10kx0: [MPSAFE] emu10kx0: [ITHREAD] emu10kx: setmap (f9a0000, 8000), nseg=1, error=0 emu10kx: setmap (f9b0000, 1000), nseg=1, error=0 emu10kx0: Card Configuration ( 0x00011211 ) emu10kx0: Card Configuration ( & 0xff000000 ) : emu10kx0: Card Configuration ( & 0x00ff0000 ) : [I2S Codec] emu10kx0: Card Configuration ( & 0x0000ff00 ) : [GPOUT0] [Joystick] emu10kx0: Card Configuration ( & 0x000000ff ) : [AUTOMUTE] [AUDIOENABLE] emu10kx0: Audigy Card Configuration ( 0x0084 ) emu10kx0: Audigy Card Configuration ( & 0xff00 ) : emu10kx0: Audigy Card Configuration ( & 0x00ff ) : [0x80] [GPOUT0] pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0 pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 6 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "line2": pcm0: Mixer "line3": pcm0: Mixer "dig1": pcm0: Mixer "dig2": pcm0: Mixer "dig3": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=750ms flags=0x8000001e emu10kx: setmap (f9c0000, 1000), nseg=1, error=0 emu10kx: setmap (f9d0000, 1000), nseg=1, error=0 emu10kx: setmap (f9e0000, 1000), nseg=1, error=0 emu10kx: setmap (f9f0000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap 1000000, 10000; 0xcc5a8000 -> 1000000 pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0 pcm1: Mixer "vol": pcm1: Mixer "pcm": pcm1: clone manager: deadline=750ms flags=0x8000001e emu10kx: setmap (1060000, 1000), nseg=1, error=0 pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0 pcm2: Mixer "vol": pcm2: Mixer "pcm": pcm2: clone manager: deadline=750ms flags=0x8000001e emu10kx: setmap (1070000, 1000), nseg=1, error=0 pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0 pcm3: Mixer "vol": pcm3: Mixer "pcm": pcm3: clone manager: deadline=750ms flags=0x8000001e emu10kx: setmap (1090000, 1000), nseg=1, error=0 pci0: <input device> at device 9.1 (no driver attached) fwohci0: vendor=1102, dev=4001 fwohci0: vendor=1102, dev=4001 fwohci0: <1394 Open Host Controller Interface> mem 0xdb005000-0xdb0057ff,0xdb000000-0xdb003fff irq 12 at device 9.2 on pci0 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdb005000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3c:00:81:00:e7:1f fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3c:00:e7:1f fwe0: bpf attached fwe0: Ethernet address: 02:02:3c:00:e7:1f fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:02:3c:00:81:00:e7:1f @ 0xfffe00000000, S400, maxrec 2048 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xf8d8000 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdb004000-0xdb00407f irq 10 at device 11.0 on pci0 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xdb004000 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> PHY 24 on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:50:04:34:fd:c1 xl0: [MPSAFE] xl0: [ITHREAD] ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb006000-0xdb006fff irq 10 at device 13.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb006000 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb1: USB revision 1.0 uhub1: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb007000-0xdb007fff irq 12 at device 13.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb007000 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb2: USB revision 1.0 uhub2: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb008000-0xdb008fff irq 11 at device 13.2 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb008000 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2 usb3: USB revision 1.0 uhub3: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <ALi M5239 USB 2.0 controller> mem 0xdb009000-0xdb0090ff irq 14 at device 13.3 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdb009000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb1 usb2 usb3 usb4: <ALi M5239 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 6 ports with 6 removable, self powered atapci1: <SiI SiI 3112 SATA150 controller> port 0xd000-0xd007,0xd400-0xd403,0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe00f mem 0xdb00a000-0xdb00a1ff irq 11 at device 15.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdb00a000 ata2: <ATA channel 0> on atapci1 ata2: SATA connect time=0ms ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata3: [ITHREAD] bktr0: <BrookTree 878> mem 0xdb00b000-0xdb00bfff irq 12 at device 17.0 on pci0 bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb00b000 bktr0: [GIANT-LOCKED] bktr0: [ITHREAD] brooktree0: PCI bus latency is 32. bktr0: buffer size 3555328, addr 0x6000000 bktr0: GPIO is 0x000477c3 bktr0: subsystem 0x1461 0x0001 bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner. pci0: <multimedia> at device 17.1 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fd1: <1200-KB 5.25" drive> on fdc0 drive 1 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [MPSAFE] ppbus0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x801 0x801 0x801 0x801 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: <Logitech USB-PS/2 Mouse M-BA47, class 0/0, rev 1.00/1.20, addr 2> on uhub0 ums0: 4 buttons and Z dir. Device configuration finished. procfs registered Timecounter "TSC" frequency 400911913 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on PIIX4 chip acd0: setting UDMA33 on PIIX4 chip acd0: <HL-DT-ST RW/DVD GCC-4480B/1.02> CDRW drive at ata1 as master acd0: read 8251KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad0: 38146MB <WDC WD400BD-75JMA0 05.01C05> at ata2-master SATA150 ad0: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue ad0: Silicon Image check3 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed GEOM: new disk ad0 GEOM_LABEL: Label for provider ad0s1 is msdosfs/FREEDOS. (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad0s4a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) splash: image decoder found: green_saver acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x4c acpi: bad read from port 0x071 (8) ----------------- dmesg output with ACPI disabled ------------- Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #2: Sat Apr 19 20:53:27 CEST 2008 root@sarge.my.own.domain.no-net:/usr/obj/usr/src/sys/SARGE Preloaded elf kernel "/boot/kernel/kernel" at 0xc0989000. Preloaded elf module "/boot/kernel/snd_emu10kx.ko" at 0xc0989160. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0989210. Preloaded elf module "/boot/kernel/bktr.ko" at 0xc09892bc. Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc0989368. Calibrating clock(s) ... i8254 clock: 1193347 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 400910629 Hz CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> Instruction TLB: 4 KB pages, 4-way set associative, 32 entries Instruction TLB: 4 MB pages, fully associative, 2 entries Data TLB: 4 KB pages, 4-way set associative, 64 entries 2nd-level cache: 512 KB, 4-way set associative, 32 byte line size 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size real memory = 268369920 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000000fb2dfff, 250646528 bytes (61193 pages) avail memory = 253038592 (241 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb080 bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb520 pnpbios: Found PnP BIOS data at 0xc00fbed0 pnpbios: Entry = f0000:bf00 Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 bktr_mem: memory holder loaded random: <entropy source, Software, Yarrow> io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> nfslock: pseudo-device npx0: INT 16 interface cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard $PIR: Links after initial probe: Link IRQ Rtd Ref IRQs 0x62 255 N 9 3 4 5 7 9 10 11 12 14 15 0x63 255 N 9 3 4 5 7 9 10 11 12 14 15 0x60 255 N 9 3 4 5 7 9 10 11 12 14 15 0x61 255 N 9 3 4 5 7 9 10 11 12 14 15 $PIR: Found matching pin for 0.17.INTA at func 0: 12 $PIR: Found matching pin for 0.15.INTA at func 0: 11 $PIR: Found matching pin for 0.13.INTA at func 3: 14 $PIR: Found matching pin for 0.13.INTB at func 0: 10 $PIR: Found matching pin for 0.13.INTC at func 1: 12 $PIR: Found matching pin for 0.13.INTD at func 2: 11 $PIR: Found matching pin for 0.11.INTA at func 0: 10 $PIR: Found matching pin for 0.9.INTA at func 0: 11 $PIR: Found matching pin for 0.9.INTB at func 2: 12 $PIR: Found matching pin for 0.7.INTD at func 2: 10 $PIR: Links after initial IRQ discovery: Link IRQ Rtd Ref IRQs 0x62 14 Y 9 3 4 5 7 9 10 11 12 14 15 0x63 10 Y 9 3 4 5 7 9 10 11 12 14 15 0x60 12 Y 9 3 4 5 7 9 10 11 12 14 15 0x61 11 Y 9 3 4 5 7 9 10 11 12 14 15 $PIR: IRQs used by BIOS: 10 11 12 14 $PIR: Interrupt Weights: [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] [ 0 0 0 0 0 0 0 0 0 0 9 9 9 0 9 0 ] pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x7190, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 26, enabled found-> vendor=0x8086, dev=0x7191, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 domain=0, bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 domain=0, bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 domain=0, bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type I/O Port, range 32, base 0xc000, size 5, enabled $PIR: 0:7 INTD routed to irq 10 found-> vendor=0x8086, dev=0x7113, revid=0x02 domain=0, bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type I/O Port, range 32, base 0x5000, size 4, enabled found-> vendor=0x1102, dev=0x0004, revid=0x03 domain=0, bus=0, slot=9, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xc400, size 5, enabled $PIR: 0:9 INTA routed to irq 11 found-> vendor=0x1102, dev=0x7003, revid=0x03 domain=0, bus=0, slot=9, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xc800, size 3, enabled found-> vendor=0x1102, dev=0x4001, revid=0x01 domain=0, bus=0, slot=9, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xdb005000, size 11, enabled map[14]: type Memory, range 32, base 0xdb000000, size 14, enabled $PIR: 0:9 INTB routed to irq 12 found-> vendor=0x10b7, dev=0x9055, revid=0x30 domain=0, bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xcc00, size 7, enabled map[14]: type Memory, range 32, base 0xdb004000, size 7, enabled $PIR: 0:11 INTA routed to irq 10 found-> vendor=0x10b9, dev=0x5237, revid=0x03 domain=0, bus=0, slot=13, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb006000, size 12, enabled $PIR: 0:13 INTB routed to irq 10 found-> vendor=0x10b9, dev=0x5237, revid=0x03 domain=0, bus=0, slot=13, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=12 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb007000, size 12, enabled $PIR: 0:13 INTC routed to irq 12 found-> vendor=0x10b9, dev=0x5237, revid=0x03 domain=0, bus=0, slot=13, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb008000, size 12, enabled $PIR: 0:13 INTD routed to irq 11 found-> vendor=0x10b9, dev=0x5239, revid=0x01 domain=0, bus=0, slot=13, func=3 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=14 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb009000, size 8, enabled $PIR: 0:13 INTA routed to irq 14 found-> vendor=0x1095, dev=0x3112, revid=0x01 domain=0, bus=0, slot=15, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled map[1c]: type I/O Port, range 32, base 0xdc00, size 2, enabled map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled map[24]: type Memory, range 32, base 0xdb00a000, size 9, enabled $PIR: 0:15 INTA routed to irq 11 found-> vendor=0x109e, dev=0x036e, revid=0x02 domain=0, bus=0, slot=17, func=0 class=04-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=12 map[10]: type Prefetchable Memory, range 32, base 0xdb00b000, size 12, enabled $PIR: 0:17 INTA routed to irq 12 found-> vendor=0x109e, dev=0x0878, revid=0x02 domain=0, bus=0, slot=17, func=1 class=04-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=12 map[10]: type Prefetchable Memory, range 32, base 0xdb00c000, size 12, enabled $PIR: 0:17 INTA routed to irq 12 agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xd8000000-0xd9ffffff pcib1: prefetched decode 0xd4000000-0xd7ffffff pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0181, revid=0xa4 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=12 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8000000, size 24, enabled pcib1: requested memory range 0xd8000000-0xd8ffffff: good map[14]: type Prefetchable Memory, range 32, base 0xd4000000, size 26, enabled pcib1: requested memory range 0xd4000000-0xd7ffffff: good $PIR: 0:1 INTA routed to irq 12 pcib1: slot 0 INTA is routed to irq 12 vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xd4000000-0xd7ffffff irq 12 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=01 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] ata1: [ITHREAD] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 10 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.3 (no driver attached) emu10kx0: <Creative Audigy (Unknown model) [SB????]> port 0xc400-0xc41f irq 11 at device 9.0 on pci0 emu10kx0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc400 emu10kx0: [MPSAFE] emu10kx0: [ITHREAD] emu10kx: setmap (f970000, 8000), nseg=1, error=0 emu10kx: setmap (f980000, 1000), nseg=1, error=0 emu10kx0: Card Configuration ( 0x00011211 ) emu10kx0: Card Configuration ( & 0xff000000 ) : emu10kx0: Card Configuration ( & 0x00ff0000 ) : [I2S Codec] emu10kx0: Card Configuration ( & 0x0000ff00 ) : [GPOUT0] [Joystick] emu10kx0: Card Configuration ( & 0x000000ff ) : [AUTOMUTE] [AUDIOENABLE] emu10kx0: Audigy Card Configuration ( 0x0084 ) emu10kx0: Audigy Card Configuration ( & 0xff00 ) : emu10kx0: Audigy Card Configuration ( & 0x00ff ) : [0x80] [GPOUT0] pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0 pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 6 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "line2": pcm0: Mixer "line3": pcm0: Mixer "dig1": pcm0: Mixer "dig2": pcm0: Mixer "dig3": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=750ms flags=0x8000001e emu10kx: setmap (f990000, 1000), nseg=1, error=0 emu10kx: setmap (f9a0000, 1000), nseg=1, error=0 emu10kx: setmap (f9b0000, 1000), nseg=1, error=0 emu10kx: setmap (f9c0000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap f9e0000, 10000; 0xcc597000 -> f9e0000 pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0 pcm1: Mixer "vol": pcm1: Mixer "pcm": pcm1: clone manager: deadline=750ms flags=0x8000001e emu10kx: setmap (1030000, 1000), nseg=1, error=0 pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0 pcm2: Mixer "vol": pcm2: Mixer "pcm": pcm2: clone manager: deadline=750ms flags=0x8000001e emu10kx: setmap (1050000, 1000), nseg=1, error=0 pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0 pcm3: Mixer "vol": pcm3: Mixer "pcm": pcm3: clone manager: deadline=750ms flags=0x8000001e emu10kx: setmap (1060000, 1000), nseg=1, error=0 pci0: <input device> at device 9.1 (no driver attached) fwohci0: vendor=1102, dev=4001 fwohci0: vendor=1102, dev=4001 fwohci0: <1394 Open Host Controller Interface> mem 0xdb005000-0xdb0057ff,0xdb000000-0xdb003fff irq 12 at device 9.2 on pci0 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdb005000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3c:00:81:00:e7:1f fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xf894000 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3c:00:e7:1f fwe0: bpf attached fwe0: Ethernet address: 02:02:3c:00:e7:1f fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:02:3c:00:81:00:e7:1f @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdb004000-0xdb00407f irq 10 at device 11.0 on pci0 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xdb004000 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> PHY 24 on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:50:04:34:fd:c1 xl0: [MPSAFE] xl0: [ITHREAD] ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb006000-0xdb006fff irq 10 at device 13.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb006000 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb1: USB revision 1.0 uhub1: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb007000-0xdb007fff irq 12 at device 13.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb007000 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb2: USB revision 1.0 uhub2: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb008000-0xdb008fff irq 11 at device 13.2 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb008000 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2 usb3: USB revision 1.0 uhub3: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <ALi M5239 USB 2.0 controller> mem 0xdb009000-0xdb0090ff irq 14 at device 13.3 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdb009000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb1 usb2 usb3 usb4: <ALi M5239 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 6 ports with 6 removable, self powered atapci1: <SiI SiI 3112 SATA150 controller> port 0xd000-0xd007,0xd400-0xd403,0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe00f mem 0xdb00a000-0xdb00a1ff irq 11 at device 15.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdb00a000 ata2: <ATA channel 0> on atapci1 ata2: SATA connect time=0ms ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata3: [ITHREAD] bktr0: <BrookTree 878> mem 0xdb00b000-0xdb00bfff irq 12 at device 17.0 on pci0 bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb00b000 bktr0: [GIANT-LOCKED] bktr0: [ITHREAD] brooktree0: PCI bus latency is 32. bktr0: buffer size 3555328, addr 0x6000000 bktr0: GPIO is 0x000477c3 bktr0: subsystem 0x1461 0x0001 bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner. pci0: <multimedia> at device 17.1 (no driver attached) pnpbios: 13 devices, largest 69 bytes PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x81-0x83, size=0x3, align=0 PNP0200: adding io range 0x87-0x87, size=0x1, align=0 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0 PNP0200: adding io range 0x8f-0x91, size=0x3, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 4 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000 pnpbios: handle 7 device ID PNP0c01 (010cd041) PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c02: adding fixed memory32 range 0xcf400-0xcffff, size=0xc00 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0a03: adding io range 0x294-0x297, size=0x4, align=0 PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0 PNP0a03: adding io range 0x4000-0x403f, size=0x40, align=0 PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0 pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 PNP0700: adding irq mask 0x40 pnpbios: handle 13 device ID PNP0700 (0007d041) PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 pnpbios: handle 14 device ID PNP0400 (0004d041) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0067 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 90 part_id 80 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 80 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fd1: <1200-KB 5.25" drive> on fdc0 drive 1 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [MPSAFE] ppbus0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sio0: irq maps: 0x801 0x811 0x801 0x801 sio0: irq maps: 0x801 0x811 0x801 0x801 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x801 0x801 0x801 0x801 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0 unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0 unknown: <PNP0a03> can't assign resources (port) unknown: <PNP0a03> at port 0x294-0x297,0x4d0-0x4d1,0xcf8-0xcff,0x480-0x48f,0x4000-0x403f,0x5000-0x501f pnpid PNP0a03 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 pnpid PNP0700 on isa0 unknown: <PNP0400> can't assign resources (port) unknown: <PNP0400> at port 0x378-0x37f pnpid PNP0400 on isa0 ums0: <Logitech USB-PS/2 Mouse M-BA47, class 0/0, rev 1.00/1.20, addr 2> on uhub0 ums0: 4 buttons and Z dir. Device configuration finished. procfs registered Timecounter "TSC" frequency 400910629 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on PIIX4 chip acd0: setting UDMA33 on PIIX4 chip acd0: <HL-DT-ST RW/DVD GCC-4480B/1.02> CDRW drive at ata1 as master acd0: read 8251KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad0: 38146MB <WDC WD400BD-75JMA0 05.01C05> at ata2-master SATA150 ad0: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue ad0: Silicon Image check3 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed GEOM: new disk ad0 GEOM_LABEL: Label for provider ad0s1 is msdosfs/FREEDOS. (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad0s4a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered splash: image decoder found: green_saver ---------------- Output from sysctl hw.acpi ----------------------- hw.acpi.supported_sleep_state: S1 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 1 hw.acpi.verbose: 1 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 0.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 70.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 200.0C hw.acpi.thermal.tz0._ACx: 70.0C -1 -1 -1 -1 -1 -1 -1 -1 -1 -- pozdrawiam / regards Zbigniew Baniewski
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080420134236.GA6019>