Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 26 Feb 2009 15:10:11 +1100 (EST)
From:      Ian Smith <smithi@nimnet.asn.au>
To:        Maciej Piechotka <uzytkownik2@gmail.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Problem with speedtouch 330
Message-ID:  <20090226145851.G71460@sola.nimnet.asn.au>
In-Reply-To: <20090224192338.43AF81065701@hub.freebsd.org>
References:  <20090224192338.43AF81065701@hub.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 24 Feb 2009 19:00:17 +0100 Maciej Piechotka <uzytkownik2@gmail.com> wrote:

 > Hello. I have a problem with Speedtouch 330. I cannot connect with my
 > IPS. In dmesg it is written that the modem_run cannot 'read interrupts'.
 > 
 > Regards
 > 
 > ppp.conf:
 > default:
 > set log Phase Chat LCP IPCP CCP tun command
 > ident user-ppp VERSION (built COMPILATIONDATE)
 > set ifaddr 10.0.0.1/0 10.0.0.2/0
 > 
 > adsl:
 > set authname mjnysqqx@webnet24.pl
 > set authkey 53T6gbDt

You should change this password, now that you've published it.

 > set device !"/usr/local/sbin/pppoa2 -vpi 0 -vci 35 -v 1 -d /dev/ugen0"
 > accep chap

It's 'accept', though the abbreviation does work (see below).

 > set sppeed sync

It's 'speed'.

 > set timeout 0
 > set reconnect 10 100
 > #enable lqr
 > #set lqrperiod 5
 > #set radial 15 1000
 > #set dial ""
 > add default HISADDR
 > #enable dns
 > 
 > ppp.log:
 > Feb 23 20:54:33 HOSTNAME ppp[961]: Phase: Using interface: tun0
 > Feb 23 20:54:33 HOSTNAME ppp[961]: Phase: deflink: Created in closed
 > state
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: default: ident
 > user-ppp VERSION (built COMPILATIONDATE)
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: default: set ifaddr
 > 10.0.0.1/0 10.0.0.2/0
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set authname
 > ******@webnet24.pl
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set authkey
 > ********
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set
 > device !/usr/local/sbin/pppoa3 -vpi 0 -vci 35 -v 1
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: accep chap
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set spped sync
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set spped: Invalid
 > command
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set spped: Failed 1

See above (though this indicates a *different* misspelling of 'speed')

 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set timeout 0
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: enable lqr
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set lqrperiod 5
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Command: adsl: set radial 15
 > 1000
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set radial: Invalid
 > command
 > Feb 23 20:54:48 HOSTNAME ppp[961]: tun0: Warning: set radial: Failed 1

Try 'redial'.  This log also doesn't match the config shown above.

cheers, Ian



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090226145851.G71460>