Date: Tue, 1 Jul 2008 21:42:16 -0700 From: Jo Rhett <jrhett@netconsonance.com> To: Marian Hettwer <mh@kernel32.de> Cc: freebsd-stable@freebsd.org Subject: Re: no serial console for ttyd0 HP Blade Message-ID: <3AC5DAEE-95F1-4211-A819-CC085DD180ED@netconsonance.com> In-Reply-To: <29641b38fd128219d11b0a910949a68c@localhost> References: <29641b38fd128219d11b0a910949a68c@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
This rhymes with sio deciding that your TTY is something other than ttyd0. We had this same problem on Rackable -- even though the proper tty was setup 0x3f8 irq 4 it was being assigned to sio1. You can see this by 'grep sio /var/log/messages' The only fix for this is to edit /boot/device.hints and reassign the flags to the sio1 interface, like so: hint.sio.1.at="isa" hint.sio.1.port="0x3F8" hint.sio.1.flags="0x10" hint.sio.1.irq="4" hint.sio.0.at="isa" hint.sio.0.port="0x2F8" hint.sio.0.irq="3" On Jul 1, 2008, at 8:23 AM, Marian Hettwer wrote: > I installed a recent (as of today) RELENG_7 on one of our HP Blades. > Unluckily my serial output stops right when a getty at ttyd0 should > kick > in. So I'm blind for the rest of the startup. > Very unfortunate. > The boot menu, as the bootup itself is printed out on serial console > until: > da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device > da0: 135.168MB/s transfers > da0: 139947MB (286611840 512 byte sectors: 255H 32S/T 35124C) > Trying to mount root from ufs:/dev/da0s1a > bce0: link state changed to DOWN > bce0: link state changed to UP > bce1: link state changed to UP > > Which is, what I think, the point when init should take over and > spawn a > serial console on ttyd0, according to my /etc/ttys: > # grep ttyd0 /etc/ttys > ttyd0 "/usr/libexec/getty std.9600" vt100 on secure > > # cat /boot/loader.conf > comconsole_speed="9600" > console="vidconsole,comconsole" # A comma separated list of > console(s) > boot_multicons="-D" # -D: Use multiple consoles > boot_serial="-h" # -h: Use serial console > > # uname -a > FreeBSD db46-202.mobile.rz 7.0-STABLE FreeBSD 7.0-STABLE #0: Tue > Jul 1 > 14:59:43 CEST 2008 root@db46-202.mobile.rz:/usr/obj/usr/src/sys/ > GENERIC > amd64 > > The blade itself is a HP BL465c G5 > > Any ideas? I don't have this blade for a long time, so I'm a bit in a > hurry. > In fact, right now I'm testing this setup against a Debian 4.0 with > Linux > 2.6.25.9 under MySQL load, and up until now the machine looks good. > If I wind up with a fully working, nearly as fast and stable as our > linux > boxes installation, I'd might be able to convince "the boys at work" > to > give FreeBSD a try. > And in a 600 server setup, I'd be thrilled to do so :-) > So lets get started with this serial console issue... which is > indeed a > pain :( > > TIA, > Marian > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org > " -- Jo Rhett Net Consonance : consonant endings by net philanthropy, open source and other randomness
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3AC5DAEE-95F1-4211-A819-CC085DD180ED>