Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 12 Jan 2005 19:13:34 +0100
From:      Michael Class <michael.class@gmx.de>
To:        current@freebsd.org
Subject:   SIL3112 and Maxtor 6Y160M0 SATA Disk: DMA Failure
Message-ID:  <41E568CE.9030905@gmx.de>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------030705060303020702090105
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Hello,
 

recently I have added a cheap SIL3112 SATA controller in my system.
 

Unfortunately when I do attach my Maxtor SATA disk to this controller
I do only get DMA errors. This is all on a recent 6.0-CURRENT system
and can be reproduced with a GENERIC kernel.
 

I have tried with and without ACPI while still getting the same
results.
 

Attached to this mail is the output of a "boot -v" of this system.
 

Anything I could do to track this further down?
 

Thank you for your help
 

Michael
 

-------------------------------------------------------------------------
         michael class
         E-Mail: michael.class@gmx.de
-------------------------------------------------------------------------

--------------030705060303020702090105
Content-Type: text/plain;
 name="GENERIC.out"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="GENERIC.out"

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Sat Jan  8 22:23:09 MET 2005
    root@sv-micha.mc.hp.com:/usr/src/sys/i386/compile/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel.GENERIC/kernel" at 0xc0a88000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a881a0.
Calibrating clock(s) ... i8254 clock: 1193228 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 996551298 Hz
CPU: Intel Pentium III (996.55-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073676288 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000003edbffff, 1041858560 bytes (254360 pages)
avail memory = 1041924096 (993 MB)
MP Configuration Table version 1.1 found at 0xc00f59a0
Table 'FACP' at 0x3fff0030
Table 'APIC' at 0x3fff00b0
MADT: Found table at 0x3fff00b0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <AMIINT >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00fdad0
bios32: Entry = 0xfdae0 (c00fdae0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb01
pnpbios: Found PnP BIOS data at 0xc00f6e40
pnpbios: Entry = f0000:5c04  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x00010000 therm: 0x00000000 err: 0x0001000f pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_694X> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=06911106)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00f7530
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    7    A   0xfe  14
embedded    0    7    B   0xff  15
embedded    0    7    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    7    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 1      0    9    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 2      0   10    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 3      0   11    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 4      0   12    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 5      0   13    D   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0   14    A   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   14    B   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   14    C   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0   14    D   0x02  3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link0: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKD> irq 9 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    9   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    9   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e0000000, size 26, enabled
found->	vendor=0x1106, dev=0x0691, revid=0xc4
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
	lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x8598, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1106, dev=0x0686, revid=0x40
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=7, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000c400, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD:0)
pcib0: slot 7 INTD routed to irq 9 via \\_SB_.LNKD
found->	vendor=0x1106, dev=0x3038, revid=0x1a
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=9
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000c800, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD:0)
pcib0: slot 7 INTD routed to irq 9 via \\_SB_.LNKD
found->	vendor=0x1106, dev=0x3038, revid=0x1a
	bus=0, slot=7, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=9
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x3057, revid=0x40
	bus=0, slot=7, func=4
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000d400, size  8, enabled
	map[14]: type 4, range 32, base 0000d000, size  2, enabled
	map[18]: type 4, range 32, base 0000cc00, size  2, enabled
pcib0: matched entry for 0.7.INTC (src \\_SB_.LNKC:0)
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
pcib0: slot 7 INTC routed to irq 10 via \\_SB_.LNKC
found->	vendor=0x1106, dev=0x3058, revid=0x50
	bus=0, slot=7, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base dffc0000, size 17, enabled
	map[14]: type 1, range 32, base dffa0000, size 17, enabled
	map[18]: type 4, range 32, base 0000c000, size  6, enabled
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x1076, revid=0x00
	bus=0, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=17
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 4, range 32, base 0000d800, size  8, enabled
	map[14]: type 1, range 32, base dfffff00, size  8, enabled
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 18
found->	vendor=0x1000, dev=0x0001, revid=0x01
	bus=0, slot=10, func=0
	class=00-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=18
	map[10]: type 3, range 32, base d8000000, size 26, enabled
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 19
found->	vendor=0x4444, dev=0x0803, revid=0x01
	bus=0, slot=11, func=0
	class=04-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=19
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base dfffd000, size 12, enabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 16
found->	vendor=0x1033, dev=0x0035, revid=0x41
	bus=0, slot=12, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base dfffe000, size 12, enabled
pcib0: matched entry for 0.12.INTB
pcib0: slot 12 INTB hardwired to IRQ 17
found->	vendor=0x1033, dev=0x0035, revid=0x41
	bus=0, slot=12, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=17
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base dffffe00, size  8, enabled
pcib0: matched entry for 0.12.INTC
pcib0: slot 12 INTC hardwired to IRQ 18
found->	vendor=0x1033, dev=0x00e0, revid=0x02
	bus=0, slot=12, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000bc00, size  3, enabled
	map[14]: type 4, range 32, base 0000b800, size  2, enabled
	map[18]: type 4, range 32, base 0000b400, size  3, enabled
	map[1c]: type 4, range 32, base 0000b000, size  2, enabled
	map[20]: type 4, range 32, base 0000ac00, size  4, enabled
	map[24]: type 1, range 32, base dffffc00, size  9, enabled
pcib0: matched entry for 0.13.INTA
pcib0: slot 13 INTA hardwired to IRQ 17
found->	vendor=0x1095, dev=0x3112, revid=0x02
	bus=0, slot=13, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=17
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x5000-0x6fff
pcib1:   memory decode     0xdfd00000-0xdfdfffff
pcib1:   prefetched decode 0xb7b00000-0xd7bfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base c8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xc8000000-0xcfffffff
	map[14]: type 4, range 32, base 00006800, size  8, enabled
pcib1: device (null) requested decoded I/O range 0x6800-0x68ff
	map[18]: type 1, range 32, base dfdf0000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xdfdf0000-0xdfdfffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found->	vendor=0x1002, dev=0x5961, revid=0x01
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base c0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xc0000000-0xc7ffffff
	map[14]: type 1, range 32, base dfde0000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xdfde0000-0xdfdeffff
found->	vendor=0x1002, dev=0x5941, revid=0x01
	bus=1, slot=0, func=1
	class=03-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 9 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Hewlett-Packard DeskJet 990C, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 9 at device 7.3 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
pci0:7:4: Transition from D0 to D3
pci0: <multimedia, audio> at device 7.5 (no driver attached)
pci0:7:5: Transition from D0 to D3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xc000-0xc03f mem 0xdffa0000-0xdffbffff,0xdffc0000-0xdffdffff irq 17 at device 9.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdffc0000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xc000
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:0e:0c:2e:81:1c
em0:  Speed:N/A  Duplex:N/A
sym0: <810> port 0xd800-0xd8ff mem 0xdfffff00-0xdfffffff irq 18 at device 10.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xdfffff00
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: [GIANT-LOCKED]
pci0: <multimedia, video> at device 11.0 (no driver attached)
pci0:11:0: Transition from D0 to D3
ohci0: <NEC uPD 9210 USB controller> mem 0xdfffd000-0xdfffdfff irq 16 at device 12.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffd000
ohci0: [GIANT-LOCKED]
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci0
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xdfffe000-0xdfffefff irq 17 at device 12.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffe000
ohci1: [GIANT-LOCKED]
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci1
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 1 port with 1 removable, self powered
pci0: <serial bus, USB> at device 12.2 (no driver attached)
pci0:12:2: Transition from D0 to D3
atapci1: <SiI 3112 SATA150 controller> port 0xac00-0xac0f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07 mem 0xdffffc00-0xdffffdff irq 17 at device 13.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xac00
atapci1: [MPSAFE]
atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdffffc00
ata2: channel #0 on atapci1
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: channel #1 on atapci1
ata3: reset tp1 mask=01 ostat0=7f ostat1=00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=ff stat1=00 devices=0x0
ata3: [MPSAFE]
pci_link2: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKB> irq 5 on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0-38, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:08, syncbits:00
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xc001 0xc011 0xc001 0xc001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0xc001 0xc009 0xc001 0xc001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0800-0xd4fff,0xcd000-0xd07ff,0xc0000-0xccfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 996551298 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 82C686B chip
ata0-master: setting UDMA100 on VIA 82C686B chip
ata0-slave: setting PIO4 on VIA 82C686B chip
ata0-slave: setting UDMA100 on VIA 82C686B chip
ad0: <IC35L180AVV207-1/V26OA60F> ATA-6 disk at ata0-master
ad0: 176700MB (361882080 sectors), 359010 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ad1: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata0-slave
ad1: 43979MB (90069840 sectors), 89355 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
ata1-master: setting PIO4 on VIA 82C686B chip
ata1-master: setting UDMA33 on VIA 82C686B chip
acd0: <SONY DVD RW DRU-500A/2.0h> DVDR drive at ata1 as master
acd0: read 5512KB/s (5512KB/s) write 4134KB/s (4134KB/s), 8192KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
em0: Link is up 1000 Mbps Full Duplex
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad4: <Maxtor 6Y160M0/YAR51BW0> ATA-7 disk at ata2-master
ad4: 156334MB (320173056 sectors), 317632 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, SATA150
ar: LSI check1 failed
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
GEOM: new disk ad0
GEOM: new disk ad1
GEOM: new disk ad4
ad4: TIMEOUT - READ_DMA retrying (2 retries left) LBA=0
ata2: reiniting channel ..
(probe3:sym0:0:3:0): error 22
(probe3:sym0:0:3:0): Unretryable Error
pass0 at sym0 bus 0 target 3 lun 0
pass0: <PIONEER DVD-ROM DVD-304F 1.03> Removable CD-ROM SCSI-2 device 
pass0: 10.000MB/s transfers (10.000MHz, offset 8)
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x00010000 therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
cd0 at sym0 bus 0 target 3 lun 0
cd0: <PIONEER DVD-ROM DVD-304F 1.03> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: resetting done ..
ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata2: device config done ..
ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=0
ata2: reiniting channel ..
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: resetting done ..
ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata2: device config done ..
ata2: reiniting channel ..
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: resetting done ..
ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ata2: device config done ..
ad4: FAILURE - READ_DMA timed out
ad4: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0
GEOM: new disk cd0
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
Trying to mount root from ufs:/dev/ad1s1a
start_init: trying /sbin/init
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
GEOM_VINUM: subdisk space.p0.s1 is up
GEOM_VINUM: subdisk space.p0.s0 is up
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error

--------------030705060303020702090105--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41E568CE.9030905>