Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 24 Apr 2010 00:33:02 +0200
From:      =?ISO-8859-1?Q?Gustau_P=E9rez?= <gperez@entel.upc.edu>
To:        Weongyo Jeong <weongyo@freebsd.org>, current@freebsd.org
Subject:   Re: Call for Test and Review: bwn(4) - another Broadcom Wireless driver
Message-ID:  <4BD2201E.3090409@entel.upc.edu>
In-Reply-To: <20100312231333.GZ1295@weongyo>
References:  <20091223035331.GA1293@weongyo>	<4b31cb29.9413f30a.5f4a.ffff8382@mx.google.com>	<20100226005115.GP14937@weongyo>	<20100227011535.ed3f2486.ray@ddteam.net>	<20100228095259.GB3536@weongyo>	<20100301103240.3a4aac8a.ray@dlink.ua>	<20100303082833.GB22865@weongyo>	<20100303111014.6564ea1e.ray@dlink.ua> <20100312231333.GZ1295@weongyo>

next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

En/na Weongyo Jeong ha escrit:
> On Wed, Mar 03, 2010 at 11:10:14AM +0200, Alexandr Rybalko wrote:
>> On Wed, 3 Mar 2010 00:28:33 -0800
>> Weongyo Jeong <weongyo.jeong@gmail.com> wrote:
>
I've been testing the driver for a few time with AMD64/CURRENT. A
few time ago I started to see messages like :

bwn0: unsupported rate 0

I've checked the code and I found it seems to fail when trying to
check the TX rate at if_bw.c:9561 (in bwn_ieeerate2hwrate
routine the rate parameter is 0). I checked where bwn_ieeerate2hwrate
is called, to see how 'rate' is calculated. This is where I got lost :(

My AP is FreeBSD 8.0 box with an atheros card. My hostapd works
with both WPA2-PSK and WPA2-EAP (although
I thinks this is not the problem) but with default values for rates
and friends. I then forced my hostapd to use only a subset of transmit
rates (with supported_rates and basic_rates) with no luck.

My laptop is a DELL D630 with a BCM4310 UART adapter.

Any need info will be provided and any help will be appreciated.

Best regards,

Gus


- --
PGP KEY : http://www-entel.upc.edu/gus/gus.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (FreeBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
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=7IfN
-----END PGP SIGNATURE-----




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BD2201E.3090409>