Date: Sat, 10 Oct 2015 11:58:42 +0200 From: Bernt Hansson <bah@bananmonarki.se> To: Alnis Morics <alnis.m@mail.com>, freebsd-questions@freebsd.org Subject: Re: Can't print to HP LJ 1020 using foo2zjs and CUPS Message-ID: <5618E152.7060301@bananmonarki.se> In-Reply-To: <56181D6F.6010200@mail.com> References: <56181D6F.6010200@mail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2015-10-09 22:02, Alnis Morics wrote: > Hi, > > I'm trying to set up HP LaserJet 1020 on 10.2-RELEASE with CUPS and > foo2zjs. That worked on previous versions of FreeBSD, although there > were changes with devices to use (I gues it was ulpt to ugen and back to > ulpt in 10.0). > > But now none of them works for me. > If I use ulpt, the moment I plug in the printer or turn it on: > > ugen3.2: <Hewlett-Packard> at usbus3 (disconnected) > ugen3.2: <Hewlett-Packard> at usbus3 > ugen3.2: <Hewlett-Packard> at usbus3 (disconnected) > ugen3.2: <Hewlett-Packard> at usbus3 > ulpt0: <Hewlett-Packard HP LaserJet 1020, class 0/0, rev 2.00/1.00, addr > 2> on usbus3 > ulpt0: using bi-directional mode > ulpt0: offline > > CUPS doesn't find this printer. I can still add it manually but when I > try to print, nothing happens, and there are no error messages. I found > out that it is exactly after the firmware is downloaded that ulpt0 turns > offline (should it?). > > If I use ugen (rebuilt CUPS with LIBUSB, moved away > /boot/kernel/ulpt.ko), then CUPS detects the printer but no firmware > gets downloaded, and, of course, I can't print. When I try to send the > firmware manually > > cat /usr/share/foo2zjs/firmware/sihp1020.dl > /dev/ugen3.2 (or > /dev/usb/3.2.0) > > the result is an input/output error. > > Any ideas of what might be wrong or how it should work now? > > > Permissions in /etc/devfs.rules: > # Begin printers_foo2zjs (added by foo2zjs/freebsd-install) > [printers_foo2zjs=42] > add path 'ulpt*' mode 0660 group cups > add path 'unlpt*' mode 0660 group cups > add path 'ugen*' mode 0660 group cups > add path 'usb/*' mode 0770 group cups > # End printers_foo2zjs (added by foo2zjs/freebsd-install) Try unlpt instead of ulpt.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5618E152.7060301>