Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 3 Nov 2010 13:20:27 -0600
From:      Dan Allen <danallen46@airwired.net>
To:        Andriy Gapon <avg@freebsd.org>
Cc:        Sergey Kandaurov <pluknet@gmail.com>, FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org>
Subject:   Re: Fatal trap 18
Message-ID:  <B06C1493-41D2-4822-9597-583DFA78ACE6@airwired.net>
In-Reply-To: <4CD121F2.3010508@freebsd.org>
References:  <68E248E0-8619-4859-BFFE-1B5F5ABBC51F@airwired.net> <AANLkTik0=x6h3YK0F_yrRJ_MGHp9pf8dVubbEwpmAa1y@mail.gmail.com> <4CD11FE9.8050105@freebsd.org> <4CD121F2.3010508@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help

On 3 Nov 2010, at 2:48 AM, Andriy Gapon wrote:

> I still would like to see verbose dmesg, just to be sure what's going =
on.

Here is the output of dmesg from the last working kerneL, with sources =
sync'd Oct 28th:

Dan

---

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights =
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #2: Thu Oct 28 14:56:36 MDT 2010
    root@u205.airwired.net:/usr/obj/usr/src/sys/DKA i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           T2400  @ 1.83GHz (1828.76-MHz =
686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x6e8  Family =3D 6  Model =3D e  =
Stepping =3D 8
  =
Features=3D0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=3D0xc1a9<SSE3,MON,VMX,EST,TM2,xTPR,PDCM>
  TSC: P-state invariant
real memory  =3D 1073741824 (1024 MB)
avail memory =3D 1027780608 (980 MB)
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
kbd1 at kbdmux0
acpi0: <TOSHIB 750> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f6a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on =
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcff8-0xcfff mem =
0xffd80000-0xffdfffff,0xe0000000-0xefffffff,0xffd40000-0xffd7ffff irq 10 =
at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xffc80000-0xffcfffff at device =
2.1 on pci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcf80-0xcf9f irq =
11 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xcf60-0xcf7f irq =
11 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xcf40-0xcf5f irq =
11 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xcf20-0xcf3f irq =
10 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem =
0xffd3bc00-0xffd3bfff irq 11 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
fxp0: <Intel Pro/100 VE Network Connection> port 0xbf40-0xbf7f mem =
0xff9ff000-0xff9fffff irq 11 at device 8.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:7b:30:ca:e5
fxp0: [ITHREAD]
cbb0: <PCI-CardBus Bridge> at device 11.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
fwohci0: <1394 Open Host Controller Interface> mem =
0xff9fe800-0xff9fefff,0xff9f8000-0xff9fbfff irq 11 at device 11.1 on =
pci3
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=3D1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:39:00:00:96:6a:bb
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:96:6a:bb
fwe0: Ethernet address: 02:00:39:96:6a:bb
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:39:00:00:96:6a:bb @ 0xfffe00000000, S400, =
maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1078000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, =
CYCLEMASTER mode
pci3: <mass storage> at device 11.2 (no driver attached)
pci3: <base peripheral, SD host controller> at device 11.3 (no driver =
attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA150 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xafa0-0xafaf irq 11 at device 31.2 =
on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid =
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 1828760835 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <=3D 0 cable IRM irm(0)  (me)=20
firewire0: bus manager 0=20
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 114473MB <TOSHIBA MK1234GSX AH001A> at ata0-master UDMA100 SATA
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
acd0: DVDR <MATSHITADVD-RAM UJ-842S/1.01> at ata1-master UDMA33 SATA
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Trying to mount root from ufs:/dev/ad0s2a
ugen1.2: <STMicroelectronics> at usbus1





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B06C1493-41D2-4822-9597-583DFA78ACE6>