Date: Mon, 7 Apr 2003 12:10:15 +0800 From: "Sukhbinder Singh" <sukhbinders@hotmail.com> To: "David Banning" <david@skytracker.ca>, <questions@freebsd.org> Subject: Re: FreeBSD Port/Distribution Installation Message-ID: <BAY2-DAV24lyg35sQtg00063377@hotmail.com> References: <BAY2-DAV68RsnhvDbDz00059004@hotmail.com> <20030403010315.A32901@skytrackercanada.com> <BAY2-DAV35LsxpTljBO00057f69@hotmail.com> <20030403114710.B39962@skytrackercanada.com> <BAY2-DAV73e4zadTMVw00060954@hotmail.com> <20030405012315.A92644@skytrackercanada.com> <BAY2-DAV5SAH2JZZJfw00061226@hotmail.com> <20030405021720.B93482@skytrackercanada.com> <BAY2-DAV43pcXYfkHRG000577c8@hotmail.com> <20030405164107.A9466@skytrackercanada.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I have got my ppp.conf file ready. I copied the "default" that you gave me in your mail. Then, I tried launching ppp. by typing ppp -ddial at the command prompt. I got to the stage where one of the 3 ppp's the first "p" turning into capital "P" that's it then the next line I got all the p's again in lowercase. I do not know what is the problem here. my ppp.conf file is the default that you mailed me. Any help will be helpful. -Singh. ----- Original Message ----- From: David Banning <david@skytracker.ca> To: Sukhbinder Singh <sukhbinders@hotmail.com> Cc: David Banning <david@skytracker.ca>; <questions@freebsd.org> Sent: Sunday, April 06, 2003 5:41 AM Subject: Re: FreeBSD Port/Distribution Installation > On Sat, Apr 05, 2003 at 05:44:20PM +0800, Sukhbinder Singh wrote: > > what do I type at the place for "default: > # or name_of_service_provider" in > These are just names for your ppp to lookup what entries to pay attention > to. If you fire ppp with the simple command "ppp" it will execute > the entries after "default". On the other hand, if you want to > execute another set of settings for ppp, you could put them > after another name that you make up. So I could make active the > settings after pppoe: by executing; > > # ppp -ddial -nat pppoe > > or > > # ppp -ddial -nat default > > would execute the settings after default: > > or if no name is given, like; > > # ppp -ddial > > then it goes to the settings under default: > > default: # or name_of_service_provider > set device PPPoE:rl0 # replace xl1 with your ethernet device > set mru 1492 > set mtu 1492 > set authname whatever > set authkey whatever > set log Phase tun command # you can add more detailed logging if you wish > set dial > set login > set ifaddr 209.188.66.29 206.221.248.4 > add default HISADDR > nat enable yes # if you want to enable nat for your local net > > pppoe: > set device PPPoE:rl0 > set mru 1492 > set mtu 1492 > set speed sync > enable lqr > disable vjcomp > set lqrperiod 5 > set cd 5 > set dial > set login > set timeout 0 > set authname whatever > set authkey whatever > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > add default HISADDR > > > my ppp.conf file. and also what do I type for the "set ifaddr" field in the > I would copy the one from my pppoe example above. > > > ppp.conf file. and where do I type the IP address for my ISP provider or the > > DNS for my ISP provider or the telephone number for my ISP. There has to be > For DSL there is no phone number. You just need your login and password. > Providing you do -not- have a IP static address your box will > find out what the IP address is during the negotiation. > The details of your ppp connection are in /var/log/ppp.log > You can monitor the connection with tail -f /var/log/ppp.log > > > a place where I need to type all this information or else how is the xDSL > > modem is going to contact or connect with my ISP. Any help will be helpful. > All the information goes in your ppp.conf, that is, your login and > your password. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY2-DAV24lyg35sQtg00063377>