Date: Wed, 29 Feb 2012 18:06:43 +0100 From: =?ISO-8859-1?Q?Fernando_Apestegu=EDa?= <fernando.apesteguia@gmail.com> To: Bernhard Schmidt <bschmidt@techwires.net> Cc: freebsd-wireless@freebsd.org Subject: Re: iwi firmware Message-ID: <CAGwOe2ZXJeBx-RJcmH4NogcrsdXXYWacep%2B7QByawC9gu%2BRHGw@mail.gmail.com> In-Reply-To: <CAAgh0_bEQpgLq0iywhMxfVSGz63N6tekxogc3nThhJdjZmediw@mail.gmail.com> References: <CAGwOe2YwkR7eySmssDbzaOPcfgMHsMrPVBze0u2ycd0uSfO%2BEg@mail.gmail.com> <CAAgh0_bEQpgLq0iywhMxfVSGz63N6tekxogc3nThhJdjZmediw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Feb 29, 2012 at 10:09 AM, Bernhard Schmidt <bschmidt@techwires.net>wrote: > On Tue, Feb 28, 2012 at 23:20, Fernando Apestegu=EDa > <fernando.apesteguia@gmail.com> wrote: > > Hi all, > > > > I recently installed 9.0-RELEASE on my old laptop. I used the ipw2200 > card > > in this laptop with 8.2-RELEASE without problems. However I have missed > > something I can't figure out. I get the message: > > > > iwi0: timeout processing command blocks for iwi_bss firmware > > iwi0: could not load main firmware iwi_bss > > > > This is what I have in my loader.conf: > > > > # Agree Intel's agreement license > > legal.intel_iwi.license_ack=3D1 > > > > # wireless support > > #if_iwi_load=3D"YES" This is in kernel now... > > wlan_load=3D"YES" > > firmware_load=3D"YES" > > > > iwi_bss_load=3D"YES" > > iwi_ibss_load=3D"YES" > > iwi_monitor_load=3D"YES" > > > > what am I missing? > > > > Thanks in advance. > > Hmm, there haven't been any major changes to iwi(4) between 8.2 and > 9.0, except what you've already noticed. You could try to remove > iwi(4) from the kernel config and use it as module again, just to make > sure it isn't related to that. Also, all modules iwi(4) depends on are > pulled in automatically, even the firmware modules, no need to load em > through loader.conf. > I copied GENERIC and removed the "device iwi" line. I rebooted but still got the same message. I also tried removing the iwi device and introducing the iwifw in the kernel (so I got a couple of complaints from the kernel when loading since I didn't change my loader.conf). Still the same error. > Can you post dmesg and pciconf -lvc? > Yes. dmesg: Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RELEASE #0: Fri Feb 17 18:27:35 CET 2012 root@hammer:/usr/obj/usr/src/sys/APEKERNEL9 amd64 CPU: Mobile AMD Athlon(tm) 64 Processor 2800+ (1603.68-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0xf4a Family =3D f Model =3D 4 Stepp= ing =3D 10 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M= CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!> real memory =3D 1073741824 (1024 MB) avail memory =3D 1016823808 (969 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <PTLTD APIC > MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 0.3> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8385 host to PCI bridge> on hostb0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd8000000-0xdfffffff,0xd0100000-0xd010ffff irq 18 at device 0.0 on pci1 iwi0: <Intel(R) PRO/Wireless 2200BG> at device 5.0 on pci0 fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xd0008000-0xd00087ff,0xd0000000-0xd0003fff irq 17 at device 6.0 on pci0 fwohci0: OHCI version 1.10 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:90:f5:00:00:32:12:31 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x235c000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:90:f5:32:12:31 fwe0: Ethernet address: 02:90:f5:32:12:31 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:90:f5:00:00:32:12:31 @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, CYCLEMAS= TER mode re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0x1000-0x10ff mem 0xd0008800-0xd00088ff irq 19 at device 8.0 on pci0 re0: Chip rev. 0x04000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 00:90:f5:32:12:31 cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 12.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci0: <mass storage> at device 14.0 (no driver attached) pci0: <mass storage> at device 14.1 (no driver attached) uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f at device 16.0 on pci= 0 usbus0: <VIA 83C572 USB controller> on uhci0 uhci1: <VIA 83C572 USB controller> port 0x1c20-0x1c3f at device 16.1 on pci= 0 usbus1: <VIA 83C572 USB controller> on uhci1 uhci2: <VIA 83C572 USB controller> port 0x1c40-0x1c5f at device 16.2 on pci= 0 usbus2: <VIA 83C572 USB controller> on uhci2 ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd0008c00-0xd0008cff at device 16.3 on pci0 usbus3: EHCI version 1.0 usbus3: <VIA VT6202 USB 2.0 controller> on ehci0 isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c60-0x1c6f at device 17.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcm0: <VIA VT8235> port 0x1400-0x14ff irq 22 at device 17.5 on pci0 pcm0: <Avance Logic ALC202 AC97 Codec> pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1> pci0: <simple comms> at device 17.6 (no driver attached) battery0: <ACPI Control Method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x75 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 powernow0: <PowerNow! K8> on cpu0 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <=3D 0 cable IRM irm(0) (me) firewire0: bus manager 0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: <VIA> at usbus0 uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <VIA> at usbus1 uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <VIA> at usbus2 uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <VIA> at usbus3 uhub3: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <FUJITSU MHT2080AH 006C> ATA-6 device ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 Timecounter "TSC" frequency 1603676920 Hz quality 800 cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ-840S 1.00> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present Root mount waiting for: usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 uhub3: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ada0p2 [rw]... drm0: <ATI Radeon RV350 Mobility 9600 M10 NP> on vgapci0 info: [drm] AGP at 0xe0000000 256MB info: [drm] Initialized radeon 1.31.0 20080613 info: [drm] Setting GART location based on new memory map info: [drm] Loading R300 Microcode info: [drm] Num pipes: 1 info: [drm] writeback test succeeded in 1 usecs pciconf -lvc: hostb0@pci0:0:0:0: class=3D0x060000 card=3D0x31881106 chip=3D0x31881106 rev=3D0x01 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'VT8385 [K8T800 AGP] Host Bridge' class =3D bridge subclass =3D HOST-PCI cap 02[80] =3D AGP v3 8x 4x SBA disabled cap 08[c0] =3D HT slave cap 01[68] =3D powerspec 2 supports D0 D3 current D0 cap 08[58] =3D HT interrupt pcib1@pci0:0:1:0: class=3D0x060400 card=3D0x00000000 chip=3D0xb1881106 rev=3D0x00 hdr=3D0x01 vendor =3D 'VIA Technologies, Inc.' device =3D 'VT8237 PCI bridge [K8T800/K8T890 South]' class =3D bridge subclass =3D PCI-PCI cap 01[80] =3D powerspec 2 supports D0 D1 D3 current D0 iwi0@pci0:0:5:0: class=3D0x028000 card=3D0x27028086 chip=3D0x42208086 re= v=3D0x05 hdr=3D0x00 vendor =3D 'Intel Corporation' device =3D 'PRO/Wireless 2200BG [Calexico2] Network Connection' class =3D network cap 01[dc] =3D powerspec 2 supports D0 D3 current D0 fwohci0@pci0:0:6:0: class=3D0x0c0010 card=3D0x47011558 chip=3D0x8026104c rev=3D0x00 hdr=3D0x00 vendor =3D 'Texas Instruments' device =3D 'TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)' class =3D serial bus subclass =3D FireWire cap 01[44] =3D powerspec 2 supports D0 D1 D2 D3 current D0 re0@pci0:0:8:0: class=3D0x020000 card=3D0x47011558 chip=3D0x816910ec rev= =3D0x10 hdr=3D0x00 vendor =3D 'Realtek Semiconductor Co., Ltd.' device =3D 'RTL-8169 Gigabit Ethernet' class =3D network subclass =3D ethernet cap 01[dc] =3D powerspec 2 supports D0 D1 D2 D3 current D0 cbb0@pci0:0:12:0: class=3D0x060700 card=3D0x47011558 chip=3D0x14101524 rev=3D0x01 hdr=3D0x02 vendor =3D 'ENE Technology Inc' device =3D 'CB1410 Cardbus Controller' class =3D bridge subclass =3D PCI-CardBus cap 01[a0] =3D powerspec 1 supports D0 D1 D2 D3 current D0 none0@pci0:0:14:0: class=3D0x018000 card=3D0x10501050 chip=3D0x84811050 rev=3D0x01 hdr=3D0x00 vendor =3D 'Winbond Electronics Corp' class =3D mass storage cap 01[c0] =3D powerspec 2 supports D0 D1 D2 D3 current D0 none1@pci0:0:14:1: class=3D0x018000 card=3D0x10501050 chip=3D0x84821050 rev=3D0x01 hdr=3D0x00 vendor =3D 'Winbond Electronics Corp' class =3D mass storage cap 01[c0] =3D powerspec 2 supports D0 D1 D2 D3 current D0 uhci0@pci0:0:16:0: class=3D0x0c0300 card=3D0x47011558 chip=3D0x30381106 rev=3D0x80 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'VT82xxxxx UHCI USB 1.1 Controller' class =3D serial bus subclass =3D USB cap 01[80] =3D powerspec 2 supports D0 D1 D2 D3 current D0 uhci1@pci0:0:16:1: class=3D0x0c0300 card=3D0x47011558 chip=3D0x30381106 rev=3D0x80 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'VT82xxxxx UHCI USB 1.1 Controller' class =3D serial bus subclass =3D USB cap 01[80] =3D powerspec 2 supports D0 D1 D2 D3 current D0 uhci2@pci0:0:16:2: class=3D0x0c0300 card=3D0x47011558 chip=3D0x30381106 rev=3D0x80 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'VT82xxxxx UHCI USB 1.1 Controller' class =3D serial bus subclass =3D USB cap 01[80] =3D powerspec 2 supports D0 D1 D2 D3 current D0 ehci0@pci0:0:16:3: class=3D0x0c0320 card=3D0x47011558 chip=3D0x31041106 rev=3D0x82 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'USB 2.0' class =3D serial bus subclass =3D USB cap 01[80] =3D powerspec 2 supports D0 D1 D2 D3 current D0 isab0@pci0:0:17:0: class=3D0x060100 card=3D0x47011558 chip=3D0x31771106 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'VT8235 ISA Bridge' class =3D bridge subclass =3D PCI-ISA cap 01[c0] =3D powerspec 2 supports D0 D3 current D0 atapci0@pci0:0:17:1: class=3D0x01018a card=3D0x47011558 chip=3D0x0571110= 6 rev=3D0x06 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE= ' class =3D mass storage subclass =3D ATA cap 01[c0] =3D powerspec 2 supports D0 D3 current D0 pcm0@pci0:0:17:5: class=3D0x040100 card=3D0x47011558 chip=3D0x30591106 rev=3D0x50 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'VT8233/A/8235/8237 AC97 Audio Controller' class =3D multimedia subclass =3D audio cap 01[c0] =3D powerspec 2 supports D0 D1 D2 D3 current D0 none2@pci0:0:17:6: class=3D0x078000 card=3D0x47011558 chip=3D0x30681106 rev=3D0x80 hdr=3D0x00 vendor =3D 'VIA Technologies, Inc.' device =3D 'AC'97 Modem Controller' class =3D simple comms cap 01[d0] =3D powerspec 2 supports D0 D3 current D0 hostb1@pci0:0:24:0: class=3D0x060000 card=3D0x00000000 chip=3D0x11001022 rev=3D0x00 hdr=3D0x00 vendor =3D 'Advanced Micro Devices [AMD]' device =3D 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' class =3D bridge subclass =3D HOST-PCI cap 08[80] =3D HT host hostb2@pci0:0:24:1: class=3D0x060000 card=3D0x00000000 chip=3D0x11011022 rev=3D0x00 hdr=3D0x00 vendor =3D 'Advanced Micro Devices [AMD]' device =3D 'K8 [Athlon64/Opteron] Address Map' class =3D bridge subclass =3D HOST-PCI hostb3@pci0:0:24:2: class=3D0x060000 card=3D0x00000000 chip=3D0x11021022 rev=3D0x00 hdr=3D0x00 vendor =3D 'Advanced Micro Devices [AMD]' device =3D 'K8 [Athlon64/Opteron] DRAM Controller' class =3D bridge subclass =3D HOST-PCI hostb4@pci0:0:24:3: class=3D0x060000 card=3D0x00000000 chip=3D0x11031022 rev=3D0x00 hdr=3D0x00 vendor =3D 'Advanced Micro Devices [AMD]' device =3D 'K8 [Athlon64/Opteron] Miscellaneous Control' class =3D bridge subclass =3D HOST-PCI vgapci0@pci0:1:0:0: class=3D0x030000 card=3D0x47011558 chip=3D0x4e501002 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'RV350 [Mobility Radeon 9600 M10]' class =3D display subclass =3D VGA cap 02[58] =3D AGP v3 8x 4x SBA disabled cap 01[50] =3D powerspec 2 supports D0 D1 D2 D3 current D0 > > -- > Bernhard >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGwOe2ZXJeBx-RJcmH4NogcrsdXXYWacep%2B7QByawC9gu%2BRHGw>