Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 13 Feb 2015 19:43:15 +0530
From:      KK CHN <kkchn.in@gmail.com>
To:        freebsd-questions <freebsd-questions@freebsd.org>
Subject:   UPnP inspector and mediatomb on different Subnets.
Message-ID:  <CAKgGyB94UD0a5Shd_Q3pWG3%2BwsdsWaoOwndzsW_upaXhoiOmpw@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
List,

I installed mediatomb  in my FreeBSD10 box with a recompiled the kernel
with option MROUTING for multicast support.

I referred this link for help ==>
virtuallyhyper.com/2012/10/installing-mediatomb-on-freebsd-9-and-connecting-to-it-with-xbmc-from-a-fedora-17-os/

Mediatomb installed on this box up and running I can point my Desktop PC
browse to the URL  http://my_server_ip:49152   showing the mediatomb html
page ..

But, from my Desktop pc,   I launched the  UPnP inspector as in the
tutorial, but it wont showing the mediatomb server in the dialog window of
my Desktop.


Here my Desktop PC  is on 10.184.39.120  subnet and My FreeBSD mediatomb
server is in 10.184.0.37 net work.

I suspect the UPnP inspector failed to find the mediatomb inspector due to
they are on different subnets.

A work around, that I am not very familiar with  is to install OpenVPN
server in freebsd box and OpenVPN client in my Desktop PC. to make a
Virtual network of the server and desktop pc on same subnet.

(
http://mediatomb.cc/dokuwiki/faq:faq#my_upnp_player_can_not_see_mediatomb_what_is_wrong
says to do the VPN tunneling) So I given a try..

I have done that and started OpenVPN in server box and client in Desktop PC

I can see that  from the ifconfig  output of my server box the "tun0"
interface is up and running

tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
    options=80000<LINKSTATE>
    inet6 fe80::20e:cff:fee4:62c%tun0 prefixlen 64 scopeid 0x4
    inet 10.8.0.1 --> 10.8.0.2 netmask 0xffffffff
    nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
    Opened by PID 62158



And in Desktop pc I started the client  by# openvpn --script-security 2
--config /etc/openvpn/client.conf  I can see tun0 up and running..


tun0      Link encap:UNSPEC  HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:10.8.0.6  P-t-P:10.8.0.5  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:10 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:3542 (3.4 KiB)  TX bytes:0 (0.0 B)



But still when I launch the UPnP inspector from the Desktop PC, it unable
to show the mediatomb server in the client window..

Am I doing something wrong or Please shed some light to solve this issue.


FreeBSD box compiled for   options MROUTING
uname -a  ==>

FreeBSD dms 10.0-RELEASE FreeBSD 10.0-RELEASE #2: Thu Feb 12 19:27:31 IST
2015     root@dms:/usr/obj/usr/src/sys/MYKERNEL  i386


Any more inputs required, Please specify the information required.. I can
attach the traceback/paste to a pastebin and can give more inputs..

Please shed some light in this regard..

I am able to ping from the Desktop pc after the OpenVPN setting up

root@[openvpn]#ping 10.184.0.37   (Original Remote IP of FBSD Box specified
in the openvpn client.conf)

PING 10.184.0.37 (10.184.0.37) 56(84) bytes of data.
64 bytes from 10.184.0.37: icmp_req=1 ttl=63 time=0.223 ms
64 bytes from 10.184.0.37: icmp_req=2 ttl=63 time=0.256 ms


Also ping the new tun0  iP to the server box also works

root@kk[openvpn]#ping 10.8.0.1
PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data.
64 bytes from 10.8.0.1: icmp_req=1 ttl=64 time=0.778 ms
64 bytes from 10.8.0.1: icmp_req=2 ttl=64 time=0.720 ms
^Z

This is the netstat -r  output in client PC
root@dhaneshkk[openvpn]#netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface
0.0.0.0         10.184.39.1     0.0.0.0         UG        0 0          0
eth1
10.8.0.1        10.8.0.5        255.255.255.255 UGH       0 0          0
tun0
10.8.0.5        0.0.0.0         255.255.255.255 UH        0 0          0
tun0
10.184.39.0     0.0.0.0         255.255.255.0   U         0 0          0
eth1


netstat -r output of server box is

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            10.184.0.1         UGS         0    46021    em0
10.8.0.0/24        10.8.0.2           UGS         0      447   tun0
10.8.0.1           link#4             UHS         0        0    lo0
10.8.0.2           link#4             UH          0        8   tun0
10.184.0.0/24      link#1             U           0     3817    em0
10.184.0.37        link#1             UHS         0        0    lo0
127.0.0.1          link#3             UH          0    27650    lo0

Internet6:
......................


Do I have to add any manual root  after the OpenVPN setup  in both server
and client PCs?

If so how to add? what to add?




Here is my openvpn.conf  file of server box..


 cat openvpn.conf

#################################################
# Sample OpenVPN 2.0 config file for            #
# multi-client server.                          #
#                                               #
# This file is for the server side              #
# of a many-clients <-> one-server              #
# OpenVPN configuration.                        #
#                                               #
# OpenVPN also supports                         #
# single-machine <-> single-machine             #
# configurations (See the Examples page         #
# on the web site for more info).               #
#                                               #
# This config should work on Windows            #
# or Linux/BSD systems.  Remember on            #
# Windows to quote pathnames and use            #
# double backslashes, e.g.:                     #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
#                                               #
# Comments are preceded with '#' or ';'         #
#################################################

# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d

# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one.  You will need to
# open up this port on your firewall.
port 1194

# TCP or UDP server?
;proto tcp
proto udp

# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one.  On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap

# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key).  Each client
# and the server must have their own cert and
# key file.  The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys.  Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ca.crt
cert server.crt
key server.key  # This file should be kept secret

# Diffie hellman parameters.
# Generate your own with:
#   openssl dhparam -out dh2048.pem 2048
#dh dh2048.pem
dh dh1024.pem
# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
;topology subnet

# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0

# Maintain a record of client <-> virtual IP address
# associations in this file.  If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt

# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface.  Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0.  Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients.  Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses.  You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge

# Push routes to the client to allow it
# to reach other private subnets behind
# the server.  Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).

# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
#   iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN.  This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.

# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
#   ifconfig-push 10.9.0.1 10.9.0.2

# Suppose that you want to enable different
# firewall access policies for different groups
# of clients.  There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
#     group, and firewall the TUN/TAP interface
#     for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
#     modify the firewall in response to access
#     from different clients.  See man
#     page for more info on learn-address script.
;learn-address ./script

# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
;push "redirect-gateway def1 bypass-dhcp"

# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses.  CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"

# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client

# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names.  This is recommended
# only for testing purposes.  For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn

# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120

# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
#   openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret

# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC        # Blowfish (default)
;cipher AES-128-CBC   # AES
;cipher DES-EDE3-CBC  # Triple-DES

# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo

# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100

# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
;user nobody
;group nobody

# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun

# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log

# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it.  Use one
# or the other (but not both).
;log         openvpn.log
;log-append  openvpn.log

# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3

# Silence repeating messages.  At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20
#################################################


Her is my client.conf  file of openvpn   client box..

boss@kk[openvpn]$cat client.conf
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server.     #
#                                            #
# This configuration can be used by multiple #
# clients, however each client should have   #
# its own cert and key files.                #
#                                            #
# On Windows, you might want to rename this  #
# file so it has a .ovpn extension           #
##############################################

# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client

# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one.  On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap

# Are we connecting to a TCP or
# UDP server?  Use the same setting as
# on the server.
;proto tcp
proto udp

# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote 10.184.0.37 1194
;remote my-server-2 1194

# Choose a random host from the remote
# list for load-balancing.  Otherwise
# try hosts in the order specified.
;remote-random

# Keep trying indefinitely to resolve the
# host name of the OpenVPN server.  Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite

# Most clients don't need to bind to
# a specific local port number.
nobind

# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nogroup
user nobody
group nogroup
# Try to preserve some state across restarts.
persist-key
persist-tun

# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here.  See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]

# Wireless networks often produce a lot
# of duplicate packets.  Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings

mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description.  It's best to use
# a separate .crt/.key file pair
# for each client.  A single ca
# file can be used for all clients.
ca /etc/openvpn/certs/ca.crt
cert /etc/openvpn/certs/kk.crt
key /etc/openvpn/certs/kk.key

# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server".  This is an
# important precaution to protect against
# a potential attack discussed here:
#  http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server".  The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server

# If a tls-auth key is used on the server
# then every client must also have the key.
;tls-auth ta.key 1

# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x

# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo

# Set log file verbosity.
verb 3

# Silence repeating messages
;mute 20
up /etc/openvpn/update-resolv-conf
down /etc/openvpn/update-resolv-conf
#################################################


ifconfig out put of  Client box

boss@kk[openvpn]$/sbin/ifconfig
eth1      Link encap:Ethernet  HWaddr 74:46:a0:8e:43:6b
          inet addr:10.184.39.120  Bcast:10.184.39.255  Mask:255.255.255.0
          inet6 addr: fe80::7646:a0ff:fe8e:436b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:633611 errors:0 dropped:0 overruns:0 frame:0
          TX packets:253003 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:345194263 (329.2 MiB)  TX bytes:41049274 (39.1 MiB)
          Interrupt:20 Memory:f7d00000-f7d20000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:92 errors:0 dropped:0 overruns:0 frame:0
          TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:7132 (6.9 KiB)  TX bytes:7132 (6.9 KiB)

tun0      Link encap:UNSPEC  HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:10.8.0.6  P-t-P:10.8.0.5  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:17 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:5481 (5.3 KiB)  TX bytes:168 (168.0 B)

wlan0     Link encap:Ethernet  HWaddr 10:fe:ed:8c:19:47
          inet6 addr: fe80::12fe:edff:fe8c:1947/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:38182 errors:0 dropped:1 overruns:0 frame:0
          TX packets:2273 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4403352 (4.1 MiB)  TX bytes:446232 (435.7 KiB)


##########################


IFCONFIG Output of Server box

# ifconfig
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
    ether 00:0e:0c:e4:06:2c
    inet 10.184.0.37 netmask 0xffffff00 broadcast 10.184.0.255
    inet6 fe80::20e:cff:fee4:62c%em0 prefixlen 64 scopeid 0x1
    nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
    media: Ethernet autoselect (100baseTX <full-duplex>)
    status: active
em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500

options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
    ether 00:0e:0c:e4:06:2d
    nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
    media: Ethernet autoselect
    status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
    options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
    inet 127.0.0.1 netmask 0xff000000
    nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
    options=80000<LINKSTATE>
    inet6 fe80::20e:cff:fee4:62c%tun0 prefixlen 64 scopeid 0x4
    inet 10.8.0.1 --> 10.8.0.2 netmask 0xffffffff
    nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
    Opened by PID 62158



Also the mediatomb  is listening on the new VPN  IP  of server box

/etc/rc.conf
mediatomb_enable="YES"
mediatomb_flags="-i 10.8.0.1"  // New openVPN ip address

I can access in the browser of my Desktop PC   to the URL of  server

http://10.8.0.1:49152  (OpenVPN assigned IP)  mediatomb   web html page
showing..

http://10.184.0.37:49152   of the real IP also  showing  the mediatomb web
page in browser.

 But launching the UPnP inspector from the client PC  unable to detect the
mediatomb server..


Definitely a N/W  configuration issue.. Please  help with your valuable
suggestions and tips.


Dhanesh.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKgGyB94UD0a5Shd_Q3pWG3%2BwsdsWaoOwndzsW_upaXhoiOmpw>