Date: Tue, 1 Apr 2014 10:42:21 +0200 From: amine tay <amine.tay91@gmail.com> To: dteske@freebsd.org Cc: freebsd-hackers@freebsd.org Subject: Re: Pxeboot stops Message-ID: <CAMMGsZKwTiG5JA7y6r9Hj7s%2BA1j%2BQ=Dyum5A2XVT5KMUadpx%2Bw@mail.gmail.com> In-Reply-To: <067401cf4cff$59409590$0bc1c0b0$@FreeBSD.org> References: <CAMMGsZLwhkfObMjtw0Qf=t0%2BeV-gD0GssQPMXPb2Z=xkWfnWLw@mail.gmail.com> <1396270576.1346.3.camel@powernoodle.corp.yahoo.com> <067401cf4cff$59409590$0bc1c0b0$@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
already did that, but no changes. It seams like the console it's not the source of the problem ! Normally the pxeboot should try to load the kernel using NFS, I checked and all my services are working fine. It's a little bit hard because there is no logs to see what's the problem ! 2014-03-31 18:36 GMT+02:00 <dteske@freebsd.org>: > > > > -----Original Message----- > > From: Sean Bruno [mailto:sbruno@ignoranthack.me] > > Sent: Monday, March 31, 2014 5:56 AM > > To: amine tay > > Cc: freebsd-hackers@freebsd.org > > Subject: Re: Pxeboot stops > > > > On Mon, 2014-03-31 at 14:08 +0200, amine tay wrote: > > > Hi every one, > > > When i'm trying to pxe boot FreeBSD 9.1, the pxeboot display the lines > > bellow : > > > Building the boot loader arguments > > > Looking up /BOOT/LOADER... Found > > > Relocating the loader and the BTX > > > Starting the BTX loader > > > > > > BTX loader 1.00 BTX version is 1.02 > > > Consoles: internal video/keyboard > > > BIOS CD is cd0 > > > BIOS drive C: is disk0 > > > BIOS drive D: is disk1 > > > BIOS 636kB/261056kB available memory > > > > > > FreeBSD/i386 bootstrap loader, Revision 1.1 > > > > > > But it stops here and I'm not getting the : > > > > > > pxe open : server addr > > > > > > or > > > Loading /boot/defaults/loader.conf > > > /boot/kernel/kernel text=0x64daa0 data=0xa4e80+0xa9e40 > > > syms=[0x4+0x6cac0+0x4+0x88e9d] \ > > > > It looks like its switching consoles on you. Is this the video or serial > console > > you have captured from? > > > > If its the serial console, then I suspect you need to setup the > loader.conf with > > a comconsole entry. > > > > E.g., console="vidconsole,comconsole" > > NB: Enables both video and serial instead of one or the other. > -- > Devin > > _____________ > The information contained in this message is proprietary and/or > confidential. If you are not the intended recipient, please: (i) delete the > message and all copies; (ii) do not disclose, distribute or use the message > in any manner; and (iii) notify the sender immediately. In addition, please > be aware that any message addressed to our domain is subject to archiving > and review by persons other than the intended recipient. Thank you. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAMMGsZKwTiG5JA7y6r9Hj7s%2BA1j%2BQ=Dyum5A2XVT5KMUadpx%2Bw>