Date: Tue, 11 Nov 2014 20:30:38 +0300 (MSK) From: Dmitry Morozovsky <marck@rinet.ru> To: freebsd-stable@FreeBSD.org Subject: SuperMicro IPMI/SOL and ipmitool troubles Message-ID: <alpine.BSF.2.00.1411112022500.25949@woozle.rinet.ru>
next in thread | raw e-mail | index | archive | help
Dear colleagues, I'm trying to set up sol console for supermicro servers, reading some documents including TestClusterOne, mainly: > For serial redirection to work, in the BIOS you need to redirect to com port > B and in /boot/device.hints you need hint.uart.1.flags="0x10" and enable getty on > cuau1 I can see BIOS screen ok; boot1/2 and boot/loader work fine also. However, I could not see kernel console output via SOL, neither getty on ttyu1 works. I tried different speeds, std vs 3wire, explicitely set console=comconsole vidconsole -- no luck. I even trued to use `ipmitool sol activate' on one side and `tip -115200 com2' on the other -- stiil no data between. Any hints? Thanks! For the reference: marck@centipede:~> ipmitool -H mc26.int -U root -I lanplus sol info Password: Set in progress : set-complete Enabled : true Force Encryption : false Force Authentication : false Privilege Level : USER Character Accumulate Level (ms) : 0 Character Send Threshold : 0 Retry Count : 0 Retry Interval (ms) : 0 Volatile Bit Rate (kbps) : 115.2 Non-Volatile Bit Rate (kbps) : 115.2 Payload Channel : 1 (0x01) Payload Port : 623 -- Sincerely, D.Marck [DM5020, MCK-RIPE, DM3-RIPN] [ FreeBSD committer: marck@FreeBSD.org ] ------------------------------------------------------------------------ *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru *** ------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1411112022500.25949>