Date: Wed, 17 May 2006 16:14:40 +0200 From: Bengt Ahlgren <bengta@sics.se> To: "Dennis Melentyev" <dennis.melentyev@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: 6.1 and USB: problems with mounting SonyEricsson K750 flash Message-ID: <uh7odxwbuwf.fsf@P142.sics.se> In-Reply-To: <b84edfa10605170410h7d62f190pac898c1391205a5e@mail.gmail.com> (Dennis Melentyev's message of "Wed, 17 May 2006 14:10:14 %2B0300") References: <b84edfa10605170410h7d62f190pac898c1391205a5e@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi! "Dennis Melentyev" <dennis.melentyev@gmail.com> writes: > I've got a problem with mounting SonyEricsson K750 flash card: > 6.1 is not stabily mounting/recognizing device, and, after several tries > ended up in creating TWO IDENTICAL device nodes in /dev!!! > > Has anyone any suggestion on how to resolve such a problem? > > Here is kind of my actions log: > After connecting the cable, got this in console: > umass0: Sony Ericsson Sony Ericsson K750, rev 2.00/0.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1902MB (3895296 512 byte sectors: 255H 63S/T 242C) > > so far everything is ok, except the reported disk size: it's 1Gb, not 2Gb. I get a different error, but which could possibly be related. I am running 6.1R on a Thinkpad X40. I just thought my connectors have accumulated too much dirt, because after retrying two-three times it succeeds. But perhaps dirt is not the issue, because when it succeeds in reading the size, mounting and reading works perfectly without errors. Here is what I get about 3 times out of 4 when attaching: umass0: Sony Ericsson Sony Ericsson K750, rev 2.00/0.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 And, correctly when it succeeds: umass0: Sony Ericsson Sony Ericsson K750, rev 2.00/0.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 61MB (126912 512 byte sectors: 64H 32S/T 61C) I am not sure when the above problems started. When my phone was new (July 2005) it worked without any problems. I was most likely running 5.4 at that time. Bengt
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?uh7odxwbuwf.fsf>