From owner-freebsd-questions Sun Jun 18 00:52:32 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id AAA05406 for questions-outgoing; Sun, 18 Jun 1995 00:52:32 -0700 Received: from easynet.com (easy1.easynet.com [199.2.26.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id AAA05398 for ; Sun, 18 Jun 1995 00:52:31 -0700 Received: by easynet.com (Smail3.1.28.1 #7) id m0sNF9s-000rckC; Sun, 18 Jun 95 00:52 WET DST Message-Id: From: brian@MediaCity.com (Brian Litzinger) Subject: Re: problems with WIDE drive To: gibbs@freefall.cdrom.com (Justin T. Gibbs) Date: Sun, 18 Jun 1995 00:52:40 -0700 (PDT) Cc: freebsd-questions@freebsd.org In-Reply-To: <199506172143.OAA06205@freefall.cdrom.com> from "Justin T. Gibbs" at Jun 17, 95 02:43:00 pm X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 732 Sender: questions-owner@freebsd.org Precedence: bulk > > I haven't had the oportunity to play with one of these devices before. > Does it behave the same way if you disable wide negotiation, sync > negotiation, or disconnection? Target Busy status can occur in many > different situations... do these occur when you are doing transfers > between two devices, or just I/O to/from the conner? If I disable wide, sync, and disconnection the target busy messages come out faster and in greater volume. They system also froze. The errors happen at about the same rate, going from the same CONNER to CONNER, or from NARROW device to CONNER. The errors also occur reading or writing to the CONNER. Brian Litzinger brian@easynet.com From owner-freebsd-questions Sun Jun 18 02:36:33 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id CAA08542 for questions-outgoing; Sun, 18 Jun 1995 02:36:33 -0700 Received: from escape.com (dima@escape.com [198.6.71.10]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id CAA08535 for ; Sun, 18 Jun 1995 02:36:32 -0700 Received: (dima@localhost) by escape.com (8.6.10/8.6.5) id FAA05431; Sun, 18 Jun 1995 05:31:45 -0400 Date: Sun, 18 Jun 1995 05:31:44 -0400 (EDT) From: "Dima (ELO)" To: questions@FreeBSD.org Subject: problem Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk Hi, I am having a problem. I cannot copy files from mounted dos partition to unix partition. Every time I try to do it, I get system panic. My system: P5-90, 16M RAM,adaptec 2940w, 1GB scsi fujitsu Thank you, Dima From owner-freebsd-questions Sun Jun 18 03:03:20 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id DAA09181 for questions-outgoing; Sun, 18 Jun 1995 03:03:20 -0700 Received: from hkpu01.polyu.edu.hk (hkpu01.polyu.edu.hk [158.132.14.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id DAA09161 for ; Sun, 18 Jun 1995 03:03:12 -0700 Received: by hkpu01.polyu.edu.hk (4.1/SMI-4.1) id AA29343; Sun, 18 Jun 95 18:01:32 HKT Date: Sun, 18 Jun 95 18:01:32 HKT From: en152062@hkpu01.polyu.edu.hk (Hi Little ... ) Message-Id: <9506181001.AA29343@hkpu01.polyu.edu.hk> To: questions@FreeBSD.org Sender: questions-owner@FreeBSD.org Precedence: bulk Desr Sir, I would like to seek some information about the operation manual of the FreeBSD for the admin. I have installed linux and FreeBSD. It seemed that linux is more user friendly. And more easily to be installed. But the FreeBSD is a bit difficult. I think the problems are lack of informations. Can you tell me where can I find the admin or user manual for BSD? Where can I find the configuration template of the system? Since I want to install two network cards on one system, where can I find the syntax of the command, and how can I change the routing table, static or dynamic routing table? I do also need to install the modem on the system. Would you please tell me how to config the rc.serial, inittab, gettydefs and so on? Is there any books about the operation of BSD? If yes, please recomment? Thanks and Best Regards, Alan Ng From owner-freebsd-questions Sun Jun 18 03:09:41 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id DAA09346 for questions-outgoing; Sun, 18 Jun 1995 03:09:41 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id DAA09340 for ; Sun, 18 Jun 1995 03:09:37 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id TAA17891; Sun, 18 Jun 1995 19:34:25 +0930 From: Michael Smith Message-Id: <199506181004.TAA17891@genesis.atrad.adelaide.edu.au> Subject: Re: bringing up freebsd To: tom@uniserve.com (Tom Samplonius) Date: Sun, 18 Jun 1995 19:34:24 +0930 (CST) Cc: questions@freebsd.org, leisner@sdsp.mc.xerox.com In-Reply-To: from "Tom Samplonius" at Jun 16, 95 03:42:52 pm Content-Type: text Content-Length: 1332 Sender: questions-owner@freebsd.org Precedence: bulk Tom Samplonius stands accused of saying: > > A few questions: > > 1) should I start off with the 2.05 kernel? > > Can I run the 2.0 release binaries with the 2.05 kernel > > (I have the November infomagic cd-rom). > > 2.0R binaries will not work with 2.0.5R kernel. This is misleading. In the context of the original question ("can I run a 2.0.5 kernel on top of a 2.0R system"), it's correct, as much changed between 2.0 and 2.0.5, but one certainly _can_ run 2.0 binaries under 2.0.5 (hence the compat20 package). > > Also, what's involved to cross-compile on linux for freebsd? > > Don't know. Read docs for gcc would be a start. Would probably have > to re-build gcc on Linux from scratch, plus pull over all sorts of bits > from FreeBSD. Probably be very difficult. I've done (most) of this. It's a _real_pain_. Better off configuring the BSD box with 20 or 30M of swap and NFS mounting more of the Linux system to get space. -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Sun Jun 18 04:02:01 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id EAA10221 for questions-outgoing; Sun, 18 Jun 1995 04:02:01 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id EAA10208 for ; Sun, 18 Jun 1995 04:01:43 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id UAA17989; Sun, 18 Jun 1995 20:26:39 +0930 From: Michael Smith Message-Id: <199506181056.UAA17989@genesis.atrad.adelaide.edu.au> Subject: Re: Dreaded Missing Operating System Message To: klo@gate.net (Kevin Lo) Date: Sun, 18 Jun 1995 20:26:23 +0930 (CST) Cc: questions@freebsd.org In-Reply-To: from "Kevin Lo" at Jun 17, 95 07:03:11 pm Content-Type: text Content-Length: 2377 Sender: questions-owner@freebsd.org Precedence: bulk Kevin Lo stands accused of saying: > After pillaging through the mailing list archives, I've gone through > most of the messages relating to this problem. However, I haven't a clue > on what to do. :) That's what us loonies are for, to create more mailing list archives 8) > My setup is as follows: > > C: - 170 meg DOS, Stacked > D: - 270 meg DOS (1st Half of WD540) > E: - 270 meg FreeBSD (2nd Half of WD540) > > I go through all the installation things (version 2.0.5R) with ease. > For my HD geometry, do I set it to 1048/16/63 (like it says in my > manual), or do I set it to what FreeBSD thinks (524/32/63)? If I try the > first, it spits out Missing Operating System at me. Is it safe to use the > latter option (it says not to in the HD manual). The Missing Operating System message comes from the DOG master boot record when it can't fing the OS bits it wants. In this case, I bet you've installed the Boot manager on the first disk, and hit F5 for the second disk, wherupon you're confronted with this message. It has _nothing_ to do with geometry; F5 just loads the MBR for the second disk, which is as confused as all hell, pukes and dies. You _should_ be able to set the FreeBSD partition on the second disk active in the partition editor, which should avoid this problem. Be aware that many DOS disk tools will view this as an inconsequential error, and silently unset it. A better idea is to install Booteasy on the second disk as well (get it out of the 2.0-RELEASE/tools/dos-tools directory). Then when you hit F5, you'll get another menu for the second disk, which will list DOS (which won't work) and BSD (which will 8). This _is_ a little laborious, but it _does_ work, and there's not really a better way around it, other than to create a (tiny) FreeBSD partition on the first disk (using fips or a similar partition-shrinking tool), and install a modified BSD bootloader in it to load from the second disk. I've done this before as well. > -Kevin -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Sun Jun 18 04:33:31 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id EAA10756 for questions-outgoing; Sun, 18 Jun 1995 04:33:31 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id EAA10749 for ; Sun, 18 Jun 1995 04:33:27 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id UAA18033; Sun, 18 Jun 1995 20:53:37 +0930 From: Michael Smith Message-Id: <199506181123.UAA18033@genesis.atrad.adelaide.edu.au> Subject: Re: BSD file server? To: duane@gargamel.ptw.com (Duane Ellison) Date: Sun, 18 Jun 1995 20:52:51 +0930 (CST) Cc: questions@freebsd.org In-Reply-To: from "Duane Ellison" at Jun 17, 95 10:51:27 pm Content-Type: text Content-Length: 1419 Sender: questions-owner@freebsd.org Precedence: bulk Duane Ellison stands accused of saying: > Okay, I know this is going to be a VERY stupid question but I have not > seen any information which has answered this question in any of the > FAQ's. Or at least if it did I didn't understand it. So here's the > question? Grovel not, lest your question be passed over unconsidered 8) > Is it possible to use a FreeBSD box as a "file server" for > other PCs? What I am thinking of doing is having my FreeBSD box > sit off in the corner running away, checking for mail and stuff like > that whenever it feels like it (I do not have a dedicated link) > and I would use the other PCs (Desktop & notebook) to connect > through that via LAN cards running Windows. Ok, say no more. Run Workgroups on the (spit) Windows machines, and use Samba on the BSD box as a fileserver. Samba is very cool and will do everything you want and lots more 8) Eyeball the comp.protocols.smb newsgroup for discussion on Samba. > Duane Ellison duane@gargamel.ptw.com -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Sun Jun 18 04:37:13 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id EAA10916 for questions-outgoing; Sun, 18 Jun 1995 04:37:13 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id EAA10910 for ; Sun, 18 Jun 1995 04:37:09 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id VAA18051; Sun, 18 Jun 1995 21:00:31 +0930 From: Michael Smith Message-Id: <199506181130.VAA18051@genesis.atrad.adelaide.edu.au> Subject: Re: 2.0.5-R installing from 3.5" FD To: joerg@smiley.interface-business.de (Joerg Weber) Date: Sun, 18 Jun 1995 20:59:45 +0930 (CST) Cc: questions@FreeBSD.org In-Reply-To: <9506160935.AA22100@smiley.interface-business.de> from "Joerg Weber" at Jun 16, 95 11:35:49 am Content-Type: text Content-Length: 1116 Sender: questions-owner@FreeBSD.org Precedence: bulk Joerg Weber stands accused of saying: > Info ONLY! No content, by the look of it; can anyone parse this? > Installing from 3.5" FD is possible with 2.0.5-R without > Boot-Floppies in the following way: > > - write the image of the 5.25" Bootfloppy of an normal > HD formatted 3.5" FD with dd, like > > dd if=boot.flp of=/dev/rfd0.1200 bs=1200k Huh? The same image works just fine on a 3.5" floppy. None of this stuffing around is necessary. > - change the FD-Type in the Bios-Setup of the PC on which > You will install FreeBSD 2.0.5-RELEASE Don't, it's a waste of time. > Joerg Weber It works like this : dd if=boot.flp of=/dev/fd0a Regardless of _what_ your floppy is. Leave your CMOS config alone, and boot away. -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Sun Jun 18 10:33:43 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA21626 for questions-outgoing; Sun, 18 Jun 1995 10:33:43 -0700 Received: from zap.zap.qc.ca (zap.zap.qc.ca [198.168.127.8]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id KAA21610 for ; Sun, 18 Jun 1995 10:33:40 -0700 Received: (from fortin@localhost) by zap.zap.qc.ca (8.6.9/8.6.6) id NAA11199; Sun, 18 Jun 1995 13:33:25 -0400 From: Denis Fortin Message-Id: <199506181733.NAA11199@zap.zap.qc.ca> Subject: Re: FreeBSD 2.0 To: terry@cs.weber.edu (Terry Lambert) Date: Sun, 18 Jun 1995 13:33:25 -0400 (EDT) Cc: vandj@securenet.interax.net, questions@FreeBSD.org In-Reply-To: <9506161711.AA12257@cs.weber.edu> from "Terry Lambert" at Jun 16, 95 11:11:51 am X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Content-Length: 364 Sender: questions-owner@FreeBSD.org Precedence: bulk > I would personally try the public domain equivalents (SLuRP, etc.) > before investing in that much TIA stuff. I believe it's called "slirp" instead of "slurp" (if we're referring to the same thing). -- Denis Fortin fortin@acm.org DMR Group Inc, (514) 877-3301 These opinions are my own From owner-freebsd-questions Sun Jun 18 10:38:37 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA22251 for questions-outgoing; Sun, 18 Jun 1995 10:38:37 -0700 Received: from blaze.trentu.ca (mamrs@BLAZE.TRENTU.CA [192.75.12.200]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id KAA22245 for ; Sun, 18 Jun 1995 10:38:36 -0700 Received: by blaze.trentu.ca (5.65/DEC-Ultrix/4.4) id AA23601; Sun, 18 Jun 1995 13:38:33 -0400 Date: Sun, 18 Jun 1995 13:38:32 -0400 (EDT) From: "Michael R. Skarupa" To: questions@FreeBSD.org Subject: Newsgroups Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk To Whom it may concern Do the freebsd newsgroups still exist, because they dissappeared off our Universities system a week ago. I was reading: comp.unix.bsd.freebsd.misc comp.unix.bsd.freebsd.announce If they became a different group please let my know. And if they did not dissappear I would like to know so that I can complain to the right authorities to have them brought back. I really miss these newsgroups especially now that I am having major problems with FreeBSD 2.0.5. Thank You Michael R. Skarupa From owner-freebsd-questions Sun Jun 18 12:04:12 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA27201 for questions-outgoing; Sun, 18 Jun 1995 12:04:12 -0700 Received: from wzv.win.tue.nl (wietse@wzv.win.tue.nl [131.155.210.17]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id MAA27184 for ; Sun, 18 Jun 1995 12:03:45 -0700 Received: by wzv.win.tue.nl (8.6.10/1.45) id VAA03798; Sun, 18 Jun 1995 21:03:37 +0200 From: wietse@wzv.win.tue.nl (Wietse Venema) Message-Id: <199506181903.VAA03798@wzv.win.tue.nl> Subject: Re: libskey-1.1.5.1.tgz To: freebsd-questions@freebsd.org Date: Sun, 18 Jun 95 21:03:37 MET DST Cc: wietse@gvr.win.tue.nl In-Reply-To: <199506181818.UAA03662@gvr.win.tue.nl>; from "Guido van Rooij" at Jun 18, 95 8:18 pm Organization: Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands X-Phone: +31 40 472989 (after Oct 1995: +31 40 2472989) X-Fax: +31 40 465995 (after Oct 1995: +31 40 2465995) X-Private: +31 40 433327 (after Oct 1995: +31 40 2433327) X-Mailer: ELM [version 2.3 PL11] Sender: questions-owner@freebsd.org Precedence: bulk Henry Chan wrote: > After reading the CERT warning about the S/Key vulnerabilities, I went > ahead and downloaded the libskey-1.1.5.1.tgz yesterday night for my > 1.1.5.1 machine. The installation went through without any errors; > however, none of my users can log in now...all passwords are invalid. > I'm lucky to be able to get in because I have a .rhosts file set up for > myself... > > I've since replaced the /usr/bin/login file with a copy of the old one > and everything is fine, the libskey.a and libskey.so.1.1 are still there. Could it be that some FreeBSD versions are not linked against the libcrypt.* libraries? Below is a 1.1.5.1 patch that is built that way. Please let me know if it solves the problem and I'll ask Rodney to install it on the FTP server. Wietse begin 600 libskey-1.1.5.1-export.tgz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�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end From owner-freebsd-questions Sun Jun 18 12:16:21 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA27676 for questions-outgoing; Sun, 18 Jun 1995 12:16:21 -0700 Received: from haven.uniserve.com (haven.uniserve.com [198.53.215.121]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id MAA27670 for ; Sun, 18 Jun 1995 12:16:16 -0700 Received: by haven.uniserve.com id <30744>; Sun, 18 Jun 1995 12:17:10 +0100 Date: Sun, 18 Jun 1995 12:17:07 -0700 (PDT) From: Tom Samplonius To: Michael Smith cc: questions@freebsd.org, leisner@sdsp.mc.xerox.com Subject: Re: bringing up freebsd In-Reply-To: <199506181004.TAA17891@genesis.atrad.adelaide.edu.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk On Sun, 18 Jun 1995, Michael Smith wrote: > > 2.0R binaries will not work with 2.0.5R kernel. > > This is misleading. In the context of the original question ("can I > run a 2.0.5 kernel on top of a 2.0R system"), it's correct, as much > changed between 2.0 and 2.0.5, but one certainly _can_ run 2.0 binaries > under 2.0.5 (hence the compat20 package). As long as you don't mind a system utils dumping core. As an example, swapinfo from a 4-12 snapshot will core dump on a 2.0.5R system. Tom From owner-freebsd-questions Sun Jun 18 12:56:58 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA00479 for questions-outgoing; Sun, 18 Jun 1995 12:56:58 -0700 Received: from irbs.irbs.com (irbs.com [199.182.75.129]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id MAA00471 for ; Sun, 18 Jun 1995 12:56:55 -0700 Received: (from jc@localhost) by irbs.irbs.com (8.6.11/8.6.6) id PAA16285; Sun, 18 Jun 1995 15:56:36 -0400 From: John Capo Message-Id: <199506181956.PAA16285@irbs.irbs.com> Subject: Re: Retensioning tapes with mt To: awebster@dataradio.com (Andrew Webster) Date: Sun, 18 Jun 1995 15:56:35 -0400 (EDT) Cc: freebsd-questions@freebsd.org In-Reply-To: <199506141937.PAA12555@vhf.dataradio.com> from "Andrew Webster" at Jun 14, 95 03:38:27 pm X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1750 Sender: questions-owner@freebsd.org Precedence: bulk Andrew Webster writes: > > I can't seem to find away to retension my tapes in an Archive 5252S drive > connected to AHA-1542CF on 2.0-RELEASE. Is there another command besides > mt that must be used to do this? > Here are my patches to add re-tensioning. -- John Capo *** sys/scsi/st.c.orig Sun Apr 9 16:29:50 1995 --- sys/scsi/st.c Sun Apr 9 16:40:47 1995 *************** *** 1237,1242 **** --- 1237,1247 ---- case MTCOMP: /* enable default compression */ errcode = st_comp(unit,number); break; + + case MTRETEN: /* Re-tension tape */ + errcode = st_load(unit, LD_RETEN, 0); + break; + default: errcode = EINVAL; } *** usr.bin/mt/mt.1.orig Sun Apr 9 16:45:09 1995 --- usr.bin/mt/mt.1 Sun Apr 9 17:07:38 1995 *************** *** 89,94 **** --- 89,97 ---- .It Cm erase Erase the tape (Count is ignored). + .It Cm retension + Re-tension the tape + (Count is ignored). .It Cm status Print status information about the tape unit. .El *** sys/sys/mtio.h.orig Sun Apr 9 16:28:26 1995 --- sys/sys/mtio.h Sun Apr 9 16:29:30 1995 *************** *** 79,84 **** --- 79,85 ---- #define MTERASE 12 /* erase to EOM */ #define MTEOD 13 /* Space to EOM *//* lost the code for this */ #define MTCOMP 14 /* select compression mode 0=off, 1=def */ + #define MTRETEN 15 /* retension tape */ #endif *** usr.bin/mt/mt.c.orig Tue Apr 18 22:54:19 1995 --- usr.bin/mt/mt.c Sat Apr 22 10:51:53 1995 *************** *** 87,92 **** --- 87,93 ---- { "density", MTSETDNSTY, 0, NEED_2ARGS|ZERO_ALLOWED|IS_DENSITY }, { "eom", MTEOD, 1 }, { "comp", MTCOMP, 0, NEED_2ARGS|ZERO_ALLOWED }, + { "retension", MTRETEN, 1 }, #endif /* defined(__FreeBSD__) */ { NULL } }; From owner-freebsd-questions Sun Jun 18 13:46:54 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA02892 for questions-outgoing; Sun, 18 Jun 1995 13:46:54 -0700 Received: from cs.weber.edu (cs.weber.edu [137.190.16.16]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id NAA02886 for ; Sun, 18 Jun 1995 13:46:52 -0700 Received: by cs.weber.edu (4.1/SMI-4.1.1) id AA18627; Sun, 18 Jun 95 14:39:44 MDT From: terry@cs.weber.edu (Terry Lambert) Message-Id: <9506182039.AA18627@cs.weber.edu> Subject: Re: FreeBSD 2.0 To: fortin@zap.zap.qc.ca (Denis Fortin) Date: Sun, 18 Jun 95 14:39:44 MDT Cc: vandj@securenet.interax.net, questions@FreeBSD.org In-Reply-To: <199506181733.NAA11199@zap.zap.qc.ca> from "Denis Fortin" at Jun 18, 95 01:33:25 pm X-Mailer: ELM [version 2.4dev PL52] Sender: questions-owner@FreeBSD.org Precedence: bulk > > I would personally try the public domain equivalents (SLuRP, etc.) > > before investing in that much TIA stuff. > > I believe it's called "slirp" instead of "slurp" (if we're referring > to the same thing). Yeah... you're the second one to point out that my spelling is atrocious. 8^). It's the same one I was referring to. Terry Lambert terry@cs.weber.edu --- Any opinions in this posting are my own and not those of my present or previous employers. From owner-freebsd-questions Sun Jun 18 14:59:35 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA05632 for questions-outgoing; Sun, 18 Jun 1995 14:59:35 -0700 Received: from relay.hp.com (relay.hp.com [15.255.152.2]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id OAA05626 for ; Sun, 18 Jun 1995 14:59:34 -0700 Received: from hpmwtd.sr.hp.com by relay.hp.com with SMTP (1.37.109.16/15.5+ECS 3.3) id AA206712773; Sun, 18 Jun 1995 14:59:33 -0700 Received: from hpnmhjw.sr.hp.com by hpmwtd.sr.hp.com with SMTP (15.11.1.6/15.5+ECS 3.3) id AA10100; Sun, 18 Jun 95 14:59:31 -0700 Received: from mina.sr.hp.com by hpnmhjw.sr.hp.com with SMTP (1.37.109.15/15.5+ECS 3.3) id AA021672770; Sun, 18 Jun 1995 14:59:30 -0700 Message-Id: <199506182159.AA021672770@hpnmhjw.sr.hp.com> To: freebsd-questions@freefall.cdrom.com Subject: Serial port handling in 2.0.5R? Date: Sun, 18 Jun 1995 14:59:29 -0700 From: Darryl Okahata Sender: questions-owner@FreeBSD.org Precedence: bulk Hi, Did the serial port flow control handling change between 1.1.5.1 and 2.0.5R? I just upgraded from 1.1.5.1 to 2.0.5R, and I'm sorely confused as to how outgoing flow control is handled when trying to call out. The problem that I'm seeing is that the carrier detect line is controlling output flow if crtscts is set. Basically, with this condition on my outgoing device, /dev/cuaa1: clocal crtscts -mdmbuf etc. I cannot make an outgoing call, because the sio driver will not send characters to the modem because the modem does not have the carrier detect line asserted. If I futz with the modem to force the carrier detect line to be always on, I can then make outgoing calls (this is, of course, a problem is I ever want to accept incoming calls). Another "workaround" that I've found is to disable crtscts, e.g.: clocal -crtscts -mdmbuf etc. However, I want hardware flow control (compounding the problem is that cu always seems to set crtscts, even though it's not set in /dev/cuaia1). I this a bug, or am I just not using the port correctly? Thanks, -- Darryl Okahata Internet: darrylo@sr.hp.com DISCLAIMER: this message is the author's personal opinion and does not constitute the support, opinion or policy of Hewlett-Packard or of the little green men that have been following him all day. From owner-freebsd-questions Sun Jun 18 18:38:06 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id SAA14912 for questions-outgoing; Sun, 18 Jun 1995 18:38:06 -0700 Received: from wc.cdrom.com (wc.cdrom.com [192.216.223.37]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id SAA14906 for ; Sun, 18 Jun 1995 18:38:05 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by wc.cdrom.com (8.6.12/8.6.12) with ESMTP id SAA27197 for ; Sun, 18 Jun 1995 18:38:02 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id KAA19182; Mon, 19 Jun 1995 10:55:54 +0930 From: Michael Smith Message-Id: <199506190125.KAA19182@genesis.atrad.adelaide.edu.au> Subject: Re: FreeBSD 2.0 To: fortin@zap.zap.qc.ca (Denis Fortin) Date: Mon, 19 Jun 1995 10:55:53 +0930 (CST) Cc: terry@cs.weber.edu, vandj@securenet.interax.net, questions@FreeBSD.org In-Reply-To: <199506181733.NAA11199@zap.zap.qc.ca> from "Denis Fortin" at Jun 18, 95 01:33:25 pm Content-Type: text Content-Length: 817 Sender: questions-owner@FreeBSD.org Precedence: bulk Denis Fortin stands accused of saying: > > > I would personally try the public domain equivalents (SLuRP, etc.) > > before investing in that much TIA stuff. > > I believe it's called "slirp" instead of "slurp" (if we're referring > to the same thing). ftp://blitzen.canberra.edu.au/pub/slirp/ (FYI) It appears to be based on the FreeBSD SLIP code 8) > Denis Fortin fortin@acm.org -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Sun Jun 18 18:38:27 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id SAA14943 for questions-outgoing; Sun, 18 Jun 1995 18:38:27 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id SAA14925 for ; Sun, 18 Jun 1995 18:38:08 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id LAA19200; Mon, 19 Jun 1995 11:03:23 +0930 From: Michael Smith Message-Id: <199506190133.LAA19200@genesis.atrad.adelaide.edu.au> Subject: Re: bringing up freebsd To: tom@uniserve.com (Tom Samplonius) Date: Mon, 19 Jun 1995 11:03:23 +0930 (CST) Cc: msmith@atrad.adelaide.edu.au, questions@freebsd.org, leisner@sdsp.mc.xerox.com In-Reply-To: from "Tom Samplonius" at Jun 18, 95 12:17:07 pm Content-Type: text Content-Length: 1135 Sender: questions-owner@freebsd.org Precedence: bulk Tom Samplonius stands accused of saying: > On Sun, 18 Jun 1995, Michael Smith wrote: > > > 2.0R binaries will not work with 2.0.5R kernel. > > > > This is misleading. In the context of the original question ("can I > > run a 2.0.5 kernel on top of a 2.0R system"), it's correct, as much > > changed between 2.0 and 2.0.5, but one certainly _can_ run 2.0 binaries > > under 2.0.5 (hence the compat20 package). > > As long as you don't mind a system utils dumping core. As an example, > swapinfo from a 4-12 snapshot will core dump on a 2.0.5R system. And what I wrote was misleading as well 8) To run a 2.0.5 kernel you want 2.0.5 system binaries to work with it, but most of the user-land programs that work under 2.0 work under 2.0.5. > Tom -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Sun Jun 18 19:47:58 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id TAA17246 for questions-outgoing; Sun, 18 Jun 1995 19:47:58 -0700 Received: from comnet.spu.ac.th (comnet.spu.ac.th [202.44.68.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id TAA17229 for ; Sun, 18 Jun 1995 19:47:00 -0700 Received: by comnet.spu.ac.th (8.6.9/A/UX-3.00) id JAA00229; Mon, 19 Jun 1995 09:47:37 -0700 Date: Mon, 19 Jun 1995 09:47:36 -0700 (PDT) From: amnuay muthitacharoen To: questions@FreeBSD.org Subject: FreeBSD installation Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk I have a problem booting FreeBSD Unix on my PC (80486) from a Mitsumi CDROM. The booting program kept posing the folowing message :- "unable to mount /dev/mcd0a on /mnt " Please tell me why ? What have I done wrong. Thank you in advance for your kind advice on this nagging problem ? Amnuay From owner-freebsd-questions Sun Jun 18 20:36:33 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id UAA20084 for questions-outgoing; Sun, 18 Jun 1995 20:36:33 -0700 Received: from jolt.eng.umd.edu (jolt.eng.umd.edu [129.2.102.5]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id UAA20074 for ; Sun, 18 Jun 1995 20:36:32 -0700 Received: from espresso.eng.umd.edu (espresso.eng.umd.edu [129.2.98.13]) by jolt.eng.umd.edu (8.6.10/8.6.4) with ESMTP id XAA19275; Sun, 18 Jun 1995 23:36:17 -0400 Received: (chuckr@localhost) by espresso.eng.umd.edu (8.6.10/8.6.4) id XAA08989; Sun, 18 Jun 1995 23:36:16 -0400 Date: Sun, 18 Jun 1995 23:36:16 -0400 (EDT) From: Chuck Robey To: Denis Fortin cc: Terry Lambert , vandj@securenet.interax.net, questions@FreeBSD.org Subject: Re: FreeBSD 2.0 In-Reply-To: <199506181733.NAA11199@zap.zap.qc.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk On Sun, 18 Jun 1995, Denis Fortin wrote: > > I would personally try the public domain equivalents (SLuRP, etc.) > > before investing in that much TIA stuff. > > I believe it's called "slirp" instead of "slurp" (if we're referring > to the same thing). If you look at the README you'll see it was slurp at first, then changed to slirp. > -- > Denis Fortin fortin@acm.org > DMR Group Inc, (514) 877-3301 These opinions are my own > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@eng.umd.edu | communications topic, C programming, and Unix. 7608 Topton St. | New Carrollton, MD 20784 | I run Journey2 (Freebsd 2.0) and n3lxx (301) 459-2316 | (FreeBSD 1.1.5.1) and am I happy! ----------------------------+----------------------------------------------- From owner-freebsd-questions Mon Jun 19 02:47:29 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id CAA06826 for questions-outgoing; Mon, 19 Jun 1995 02:47:29 -0700 Received: from csvax1.ucc.ie (csvax1.ucc.ie [143.239.1.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id CAA06816 for ; Mon, 19 Jun 1995 02:47:17 -0700 Received: from csws2.ucc.ie by csvax1.ucc.ie (MX V4.1 VAX) with SMTP; Mon, 19 Jun 1995 10:46:46 BST Received: by csws2.ucc.ie (5.57/Ultrix3.0-C) id AA06385; Mon, 19 Jun 95 10:48:11 +0100 Date: Mon, 19 Jun 95 10:48:11 +0100 From: dave@odyssey.ucc.ie (David B. O'Byrne) Message-ID: <9506190948.AA06385@csws2.ucc.ie> To: questions@freebsd.org Subject: What are the minimum Specs for a machine to run DOS/OS2 + FreeBSD Sender: questions-owner@freebsd.org Precedence: bulk Hi, I will be getting enough money to set up a lab of Machines. I want to be able to run OS2 DOS and FreeBSD My understanding was that in previous versions of FreeBSD (possibly a generic problem with the PC archictecture) that very ladge disks containing multiple operating systems was a problem. I believe the problem stemmed from the root/boot partition needing to be below 1024 so BIOS can boot the kernel from it. Am I correct ? I believe FreeBSD 2.? was supposed to add support for something (sorry cannot remember what exactly) that would allow easier support for this type of setup... Am I making sense ? thank you David From owner-freebsd-questions Mon Jun 19 02:49:02 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id CAA06948 for questions-outgoing; Mon, 19 Jun 1995 02:49:02 -0700 Received: from kepler.aps.seikei.ac.jp ([133.220.92.3]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id CAA06942 for ; Mon, 19 Jun 1995 02:48:53 -0700 Received: from [133.220.130.192] by kepler.aps.seikei.ac.jp (4.1/2.7W) id AA01561; Mon, 19 Jun 95 18:48:15 JST Date: Mon, 19 Jun 95 18:48:15 JST Message-Id: <9506190948.AA01561@kepler.aps.seikei.ac.jp> To: FreeBSD-questions@freefall.cdrom.com From: ishida@kepler.aps.seikei.ac.jp (=?ISO-2022-JP?B?GyRCQFBFRCEhPy1GOxsoQg==?=) Subject: Question on Installtion X-Mailer: Eudora-J(1.3.3J7) Mime-Version: 1.0 Content-Type: text/plain; charset=iso-2022-jp Sender: questions-owner@FreeBSD.org Precedence: bulk How do you do? I'm trying to install Free-BSD to AT compatible DOS/V machine.RAM32M,HD408M When asked about the drive type in the installation, I inkeyed "IDE" and "wd0". Then I got the folloing error message:udi 0 on/:file system is full. Before the installation, the hard disk is completely formated in MS-DOS. What is wrong? Sincerely, Nobumichi. From owner-freebsd-questions Mon Jun 19 05:55:58 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id FAA14651 for questions-outgoing; Mon, 19 Jun 1995 05:55:58 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id FAA14645 for ; Mon, 19 Jun 1995 05:55:51 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id WAA20246; Mon, 19 Jun 1995 22:20:13 +0930 From: Michael Smith Message-Id: <199506191250.WAA20246@genesis.atrad.adelaide.edu.au> Subject: Re: What are the minimum Specs for a machine to run DOS/OS2 + FreeBSD To: dave@odyssey.ucc.ie (David B. O'Byrne) Date: Mon, 19 Jun 1995 22:20:13 +0930 (CST) Cc: questions@freebsd.org In-Reply-To: <9506190948.AA06385@csws2.ucc.ie> from "David B. O'Byrne" at Jun 19, 95 10:48:11 am Content-Type: text Content-Length: 1656 Sender: questions-owner@freebsd.org Precedence: bulk David B. O'Byrne stands accused of saying: > Hi, I will be getting enough money to set up a lab of Machines. Lucky man! 8) > I want to be able to run OS2 DOS and FreeBSD That's reasonable. > My understanding was that in previous versions of FreeBSD (possibly > a generic problem with the PC archictecture) that very ladge disks > containing multiple operating systems was a problem. I believe the > problem stemmed from the root/boot partition needing to be below > 1024 so BIOS can boot the kernel from it. That's spot on. It's a generic PC problem; DOS and OS/2 get around it by making sure that their in-filesystem bootstrap programs are at the beginning of the disk. With FreeBSD this is not reasonable, and thus the entire partition containing the kernel must be within the first 1024 cylinders. > Am I correct ? I believe FreeBSD 2.? was supposed to add support for > something (sorry cannot remember what exactly) that would allow > easier support for this type of setup... There really isn't much that could be done, short of yet another stage in the bootstrap process, and it isn't really a problem unless you are planning on having a stupidly large filesystem at the beginning of the disk. How much disk are you planning to put on these machines? > David -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Mon Jun 19 06:02:29 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA15030 for questions-outgoing; Mon, 19 Jun 1995 06:02:29 -0700 Received: from vhf.dataradio.com (G496.InterLink.NET [198.168.61.62]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id GAA15024 for ; Mon, 19 Jun 1995 06:02:26 -0700 Received: from dri.UUCP (udri@localhost) by vhf.dataradio.com (8.6.12/8.6.12) with UUCP id IAA12567 for freebsd-questions@freebsd.org; Mon, 19 Jun 1995 08:56:35 -0400 Message-Id: <199506191256.IAA12567@vhf.dataradio.com> Received: by dri (UUXFER v1.3d); Mon 19 Jun 1995 08:56:54 EDT From: "Andrew Webster" To: John Capo Date: Mon, 19 Jun 1995 08:57:12 EST5EDT Subject: Re: Retensioning tapes with mt CC: freebsd-questions@freebsd.org X-Confirm-Reading-To: "Andrew Webster" X-pmrqc: 1 Priority: normal X-mailer: Pegasus Mail v3.22 Sender: questions-owner@freebsd.org Precedence: bulk Thanks very much, I'll give these a spin! ----------------------------------------------------------------------- Andrew Webster Network Manager / Special Projects Dataradio Inc. 200-5500 Royalmount Ave. TEL: +1 514 737 0020 Town of Mount Royal, QC, CANADA H4P 1H7 FAX: +1 514 737 7883 http://www.dataradio.com Email: awebster@dataradio.com From owner-freebsd-questions Mon Jun 19 07:00:52 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA18239 for questions-outgoing; Mon, 19 Jun 1995 07:00:52 -0700 Received: from maelstrom.cc.mcgill.ca (maelstrom.CC.McGill.CA [132.206.35.2]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id HAA18233 for ; Mon, 19 Jun 1995 07:00:51 -0700 Received: (from yves@localhost) by maelstrom.cc.mcgill.ca (8.6.10/8.6.6) id JAA06862 for questions@freebsd.org; Mon, 19 Jun 1995 09:52:23 -0400 Message-Id: <199506191352.JAA06862@maelstrom.cc.mcgill.ca> Content-Type: text/plain MIME-Version: 1.0 (NeXT Mail 3.3 v118.2) Received: by NeXT.Mailer (1.118.2) From: Yves Lepage Date: Mon, 19 Jun 95 09:52:21 -0400 To: questions@freebsd.org Subject: A small set of problems Reply-To: yves@CC.McGill.CA Sender: questions-owner@freebsd.org Precedence: bulk Hello all, I have a small set of problems remaining with 2.0: 1- my at-work machine: FreeBSD 2.0, 2 3c509's, 40MB mem, 1.25GB IDE disk, PCI bus. The problem is that the ep driver doesn't seem to support multicast. I didn't find anything related to mcast with that driver. Is mcast something that's driver dependant or do I need a new ifconfig that'd know how to set the 2 interfaces to be mcast capable? 2- my at-home machine: 486dx2-50, 20MB mem, 1GB disk, ISA bus. Two problems with it: 2a- It won't detect my 3c503. There is no hardware io addrs or irq conflicts. My 3c503 works fine. Any ideas? 2b- pppd doesn't seem to be able to open /dev/tty01. It hust hangs there on the open. I've tried uncommenting the | O_NDELAY flag, it worked but then chat gets an io error when waiting for stuff to come from the modem. What puzzles me, is that kermit can open that same device without any problem. Could it be that kermit's open stuff is more tolerant than that of pppd and that I should consider moving that code into pppd? Thanks alot. Yves Lepage yves@cc.mcgill.ca From owner-freebsd-questions Mon Jun 19 07:34:10 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA20222 for questions-outgoing; Mon, 19 Jun 1995 07:34:10 -0700 Received: from cc.jyu.fi (root@cc.jyu.fi [130.234.0.6]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id HAA20216 for ; Mon, 19 Jun 1995 07:34:03 -0700 Received: from [130.234.41.39] (zaphod.maccc.jyu.fi) by cc.jyu.fi with SMTP id AA06855 (5.67a/IDA-1.4.4 for questions@FreeBSD.org); Mon, 19 Jun 1995 17:36:21 +0300 X-Sender: kallio@pop.jyu.fi Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 19 Jun 1995 17:36:41 +0300 To: questions@FreeBSD.org From: kallio@jyu.fi (Seppo Kallio) Subject: I need more than 32 net users - "telnetd: All network ports in use."? Sender: questions-owner@FreeBSD.org Precedence: bulk I have recompiled kernel with maxusers 64 pseudo-device pty 80 But when 30 (!) users are logged in, next get the message "telnetd: All network ports in use." Where is the parameter I have to shange? Seppo -- +-- Seppo Kallio ----- kallio@jyu.fi ---+ ! Computing Center ! Fax +358-41-603611 Phone +358-41-603606 ! ! University of Jyvaskyla ! http://www.jyu.fi/~kallio ! +-- Finland --+-- 62.14N 25.44E -- + From owner-freebsd-questions Mon Jun 19 07:48:07 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA21534 for questions-outgoing; Mon, 19 Jun 1995 07:48:07 -0700 Received: from Root.COM (implode.Root.COM [198.145.90.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id HAA21525 for ; Mon, 19 Jun 1995 07:48:04 -0700 Received: from corbin.Root.COM (corbin [198.145.90.18]) by Root.COM (8.6.11/8.6.5) with ESMTP id HAA05404; Mon, 19 Jun 1995 07:48:01 -0700 Received: from localhost (localhost [127.0.0.1]) by corbin.Root.COM (8.6.11/8.6.5) with SMTP id HAA02256; Mon, 19 Jun 1995 07:48:20 -0700 Message-Id: <199506191448.HAA02256@corbin.Root.COM> To: kallio@jyu.fi (Seppo Kallio) cc: questions@freebsd.org Subject: Re: I need more than 32 net users - "telnetd: All network ports in use."? In-reply-to: Your message of "Mon, 19 Jun 95 17:36:41 +0300." From: David Greenman Reply-To: davidg@Root.COM Date: Mon, 19 Jun 1995 07:48:19 -0700 Sender: questions-owner@freebsd.org Precedence: bulk > >I have recompiled kernel with > >maxusers 64 >pseudo-device pty 80 > >But when 30 (!) users are logged in, next get the message > >"telnetd: All network ports in use." > >Where is the parameter I have to shange? You need to make the pty entries in /dev. See /dev/MAKEDEV. -DG From owner-freebsd-questions Mon Jun 19 08:11:12 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA23431 for questions-outgoing; Mon, 19 Jun 1995 08:11:12 -0700 Received: from aries.ibms.sinica.edu.tw ([140.109.40.248]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id IAA23425 for ; Mon, 19 Jun 1995 08:11:08 -0700 Received: (from taob@localhost) by aries.ibms.sinica.edu.tw (8.6.11/8.6.9) id XAA10070; Mon, 19 Jun 1995 23:10:38 +0800 Date: Mon, 19 Jun 1995 23:10:37 +0800 (CST) From: Brian Tao To: "Michael R. Skarupa" cc: questions@freebsd.org Subject: Re: Newsgroups In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk On Sun, 18 Jun 1995, Michael R. Skarupa wrote: > > Do the freebsd newsgroups still exist, because they dissappeared off our > Universities system a week ago. I was reading: > > comp.unix.bsd.freebsd.misc > comp.unix.bsd.freebsd.announce They are still there. Bring it to the attention of your system or news administrator at the university. -- Brian ("Though this be madness, yet there is method in't") Tao taob@gate.sinica.edu.tw <-- work ........ play --> taob@io.org From owner-freebsd-questions Mon Jun 19 08:12:18 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA23540 for questions-outgoing; Mon, 19 Jun 1995 08:12:18 -0700 Received: from aries.ibms.sinica.edu.tw ([140.109.40.248]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id IAA23532 for ; Mon, 19 Jun 1995 08:12:11 -0700 Received: (from taob@localhost) by aries.ibms.sinica.edu.tw (8.6.11/8.6.9) id XAA10059; Mon, 19 Jun 1995 23:09:59 +0800 Date: Mon, 19 Jun 1995 23:09:58 +0800 (CST) From: Brian Tao To: Seppo Kallio cc: questions@freebsd.org Subject: Re: More terminals for telnet connections - how to do them In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk On Fri, 16 Jun 1995, Seppo Kallio wrote: > > I need more pseudo terminals (?) for incomming telnet sessions. How to > make them? Systems seems to have only 32 (?) I have increased the kernel > parameter to 80 - so I think the problem is in /dev/tty?? /dev/MAKEDEV pty1 pty2 pty3 ... (each giving you another 32 ptys) -- Brian ("Though this be madness, yet there is method in't") Tao taob@gate.sinica.edu.tw <-- work ........ play --> taob@io.org From owner-freebsd-questions Mon Jun 19 09:12:47 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA26439 for questions-outgoing; Mon, 19 Jun 1995 09:12:47 -0700 Received: from copper.cmp.com (copper.cmp.com [198.80.26.247]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id JAA26431 for ; Mon, 19 Jun 1995 09:12:45 -0700 Received: from mailgate.cmp.com ([198.80.26.7]) by copper.cmp.com with SMTP (1.37.109.14/16.2) id AA236748235; Mon, 19 Jun 1995 12:10:35 -0400 Received: by mailgate.cmp.com with Microsoft Mail id <2FE5CC4C@mailgate.cmp.com>; Mon, 19 Jun 95 12:13:16 PDT From: Plyaskin Sergey To: questions Subject: RE: Bootmanager Trouble Date: Mon, 19 Jun 95 12:10:00 PDT Message-Id: <2FE5CC4C@mailgate.cmp.com> Encoding: 34 TEXT X-Mailer: Microsoft Mail V3.0 Sender: questions-owner@FreeBSD.org Precedence: bulk Do you use any hard disk manager? DriveRocket? That might be a reason. -Serge ---------- From: owner-freebsd-questions To: questions Subject: Bootmanager Trouble Date: Saturday, June 17, 1995 10:06AM Hello, While trying to install FreeSD 2.0.5R onto my hard drive, I've come up with some trouble. Here is my layout: C: Stacked DOS D: First Half Of WD540, DOS E: Second Half of WD540, FreeBSD I chose to install Bootmanager, but it never appeared when I booted up. And when I try wd(1,a)/kernel at the boot disk, it doesn't do anything but say: bad disklabelkernel not found ... Or something like that. If I try wd(1,e)/kernel, it give me this: ERROR: C:0 H:0 S:0 I'dd welcome any help you can give me- My entire D: drive was wiped due to an error while installing (argh!). I'm getting pretty annoyed. :) Thank in advance, Kevin Lo From owner-freebsd-questions Mon Jun 19 09:37:11 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA28029 for questions-outgoing; Mon, 19 Jun 1995 09:37:11 -0700 Received: from mail.Germany.EU.net (mail.Germany.EU.net [192.76.144.65]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id JAA28021 for ; Mon, 19 Jun 1995 09:37:09 -0700 Received: by mail.Germany.EU.net with UUCP (8.6.5:29/EUnetD-2.5.1.g) via EUnet id SAA24992; Mon, 19 Jun 1995 18:38:51 +0200 Received: from smiley.interface-business.de by interface-business.de with SMTP (8.6.9/GEN-1.1.5) via EUnet for unido id SAA16003; Mon, 19 Jun 1995 18:26:02 +0200 Message-Id: <9506191622.AA23889@smiley.interface-business.de> Received: by smiley.interface-business.de with UUCP (4.1/GEN-1.1.5) via EUnet for innocence id AA23889; Mon, 19 Jun 95 18:22:54 MST Subject: Screenmaps for ISO8859-1 To: questions@FreeBSD.Org Date: Mon, 19 Jun 1995 18:22:53 +0200 (MST) From: "Joerg Weber" X-Mailer: ELM [version 2.4 PL23] Mime-Version: 1.0 Content-Type: text/plain; charset=ISO8859-1 Content-Transfer-Encoding: 8bit Content-Length: 923 Sender: questions-owner@FreeBSD.Org Precedence: bulk Hi all, does anybody know, where can I get screenmap(s) for an German ISO8859-1 Console Screen?? Many Thanks! -- Sincerely, Joerg Weber _|_|_|_|_|_|_| ------------------------------------ _|_|_|_|_|_|_| _| |_|_|_|_| interface business GmbH _| |_|_|_|_| _|_ _|_|_|_|_| c/o Joerg Weber _|_ _|_|_|_|_| _|_|_|_|_|_|_| Tolkewitzer Strasse 49 _|_|_|_|_|_|_| _| |_|_|_|_| D-01277 D R E S D E N _| |_|_|_|_| _| |_|_|_|_| ------------------------------------ _| |_|_|_|_| _| _ |_| Telefon: ++49-351-33 61 186 _| _ |_| _| |_| |_| Telefax: ++49-351-33 61 187 _| |_| |_| _| |_| |_| Modem : dto., 8-N-1, max. 28800 Bd _| |_| |_| _|_ _ _ _ _|_| E-Mail : joerg@interface-business.de _|_ _ _ _ _|_| _|_|_|_|_|_|_| ------------------------------------ _|_|_|_|_|_|_| From owner-freebsd-questions Mon Jun 19 10:35:25 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA01291 for questions-outgoing; Mon, 19 Jun 1995 10:35:25 -0700 Received: from antares.mcs.anl.gov (mcs.anl.gov [140.221.9.6]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id KAA01285 for ; Mon, 19 Jun 1995 10:35:23 -0700 Received: from mcs.anl.gov (mithril.mcs.anl.gov [140.221.7.134]) by antares.mcs.anl.gov (8.6.10/8.6.10) with ESMTP id MAA11435; Mon, 19 Jun 1995 12:35:21 -0500 Message-Id: <199506191735.MAA11435@antares.mcs.anl.gov> To: questions@freebsd.org cc: toonen@antares.mcs.anl.gov Subject: drive translation problems Date: Mon, 19 Jun 1995 12:35:20 -0500 From: "Brian R. Toonen" Sender: questions-owner@freebsd.org Precedence: bulk I recently attempted to upgrade my 486 box from 1.1.5.1 to 2.0.5, only to find that the FreeBSD install program and my Micropolis 2112A drive don't seem to like each either :(. The Micropolis 2112A is one of those drives that does not identify itself and therefore makes FreeBSD "guess" at what the geometry might be. Untranslated, the drive's geometry is 2034 cylinders, 16 heads, 63 sectors. I am not certain if the drive has a translated mode or what the geometry would be if it does. As you know, the bios is incapable of reporting more than 1024 cylinders. So, when FreeBSD boots, it obtains 1024C, 16H, 63S as the geometry from the bios. In the past, I have told FreeBSD that the drive had 2034 cylinders and the install process accepted this as the truth. FreeBSD would complain at boot time that it could not obtain the parameters from the drive, but it seemed to get them from the disklabel that was written during the install. All was well. Attempting to specify the geometry (2034/16/63) with 'G' option of fdisk under 2.0.5, seems to have no affect. The ending block of the free space remains at 1032191 rather increasing to 2050271. Any attempt to allocate space beyond cylinder 1024 is ignored. I have also attempted to use pfdisk under DOS, specifying a partition extending to cylinder 2033 with an id of 165 (FreeBSD) and then firing up the FreeBSD install disk. This partition seems to be ignored entirely by the install fdisk program and the space is still listed as free space extending only through cylinder 1023. The IDE adapter in this machine does has the ability to do remapping, but it appears to do so only at the bios level. This works fine for DOS since I can turn on remapping and specify 1017C, 32H, 63S. However, this type of remapping does not seem to work for FreeBSD (not surprising since FreeBSD directly manipulates the device rather than using the bios). At the moment, I am only able to use 504MB of my drive with FreeBSD. If anyone has any suggestions on how to inform FreeBSD that the remaining 1010 cylinders exist, I would greatly appreciate it. Brian Toonen toonen@mcs.anl.gov From owner-freebsd-questions Mon Jun 19 10:56:32 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA02164 for questions-outgoing; Mon, 19 Jun 1995 10:56:32 -0700 Received: from unix.stylo.italia.com ([194.20.23.167]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id KAA02156 for ; Mon, 19 Jun 1995 10:56:23 -0700 Received: from angelo.stylo.italia.com (angelo.stylo.italia.com [194.20.21.29]) by unix.stylo.italia.com (8.6.11/8.6.9) with SMTP id VAA02882 for ; Mon, 19 Jun 1995 21:10:24 +0200 Message-Id: <199506191910.VAA02882@unix.stylo.italia.com> Date: Mon, 19 Jun 1995 17:04:49 GMT From: aturetta@stylo.italia.com (Angelo Turetta) Subject: Long pauses at startup To: freebsd-questions@freebsd.org X-Newsreader: Forte Free Agent v0.55 Sender: questions-owner@freebsd.org Precedence: bulk What can it be the problem with my 2.0.5-RELEASE system, if I have to wait for about one minute before the route_multicast line of sysconfig is executed, and about 3.5 minutes for route_localhost ? I have set host.conf to look first at hosts file, then DNS, and set entries for localhost & myhost.mydomain is /etc/hosts. This host is the DNS primary (and only) server for my subnet, so I think the hosts stuff is right: at startup named is not still running. Thanks in advance for your help Angelo Turetta. System Administrator - STYLO S.r.l. - Bologna aturetta@stylo.italia.com (Angelo Turetta) 100014.1757@compuserve.com From owner-freebsd-questions Mon Jun 19 10:56:59 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA02252 for questions-outgoing; Mon, 19 Jun 1995 10:56:59 -0700 Received: from unix.stylo.italia.com ([194.20.23.167]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id KAA02235 for ; Mon, 19 Jun 1995 10:56:51 -0700 Received: from angelo.stylo.italia.com (angelo.stylo.italia.com [194.20.21.29]) by unix.stylo.italia.com (8.6.11/8.6.9) with SMTP id VAA02911 for ; Mon, 19 Jun 1995 21:36:11 +0200 Message-Id: <199506191936.VAA02911@unix.stylo.italia.com> Date: Mon, 19 Jun 1995 17:30:37 GMT From: aturetta@stylo.italia.com (Angelo Turetta) Subject: telnet: slow connection To: freebsd-questions@freebsd.org X-Newsreader: Forte Free Agent v0.55 Sender: questions-owner@freebsd.org Precedence: bulk I'm having a strange behaviour from my 2.0.5-RELEASE box. It's the Internet gateway for our Windows/WinNT LAN. Me and a couple of fellow admins are using telnet for remote administration and unix practice. Problem is: from my WinNT 3.51 Workstation (with permanent IP address & DNS mapping, no reverse mapping) I run telnet and soon I get the login prompt. From another machine with Windows 3.11 (with IP from a DHCP pool, DNS generic name mapping dhcpN and no reverse mapping) after telnet says 'Connected' I've to wait about one minute for the login prompt. Any idea on how to solve that? Thanks Angelo Turetta. System Administrator - STYLO S.r.l. - Bologna aturetta@stylo.italia.com (Angelo Turetta) 100014.1757@compuserve.com From owner-freebsd-questions Mon Jun 19 12:42:27 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA05904 for questions-outgoing; Mon, 19 Jun 1995 12:42:27 -0700 Received: from sass165.sandia.gov (sass165.sandia.gov [132.175.109.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id MAA05898 for ; Mon, 19 Jun 1995 12:42:25 -0700 Received: from ccsmtp.sandia.gov ([134.253.48.65]) by sass165.sandia.gov (8.6.11/8.6.12) with SMTP id NAA23662 for ; Mon, 19 Jun 1995 13:49:07 -0600 Received: from cc:Mail by ccsmtp.sandia.gov id AA803590786; Mon, 19 Jun 95 10:45:09 mst Date: Mon, 19 Jun 95 10:45:09 mst From: "Laroco, John" Message-Id: <9505198035.AA803590786@ccsmtp.sandia.gov> To: questions@freebsd.org Subject: FreeBSD & 3c509 ethernet card Sender: questions-owner@freebsd.org Precedence: bulk Help, I currently have FreeBSD 2.0 installed on my system. I also have a 3c509 etherlink III card and am using the AUI port. During bootup the kernel recognizes the ethernet card and that it is configured for the AUI port. I ran the setup program that configures my IP address, netmask, and domain name, but I can't talk out. I can ping myself so I know ping is working. Are there any patches to help fix this? Thanks, -- John -- 510/294 3429 john_laroco@sandia.gov From owner-freebsd-questions Mon Jun 19 12:45:49 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA06173 for questions-outgoing; Mon, 19 Jun 1995 12:45:49 -0700 Received: from relay.philips.nl (relay.philips.nl [130.144.65.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id MAA06167 for ; Mon, 19 Jun 1995 12:45:47 -0700 Received: from knox.pcec.philips.com ([130.140.74.243]) by relay.philips.nl (8.6.9/8.6.9-950414) with SMTP id VAA03183 for ; Mon, 19 Jun 1995 21:45:14 +0200 Received: from eis16.philips.com by knox.pcec.philips.com (4.1/SMI-4.1) id AA00979; Mon, 19 Jun 95 15:45:06 EDT Received: by eis16.philips.com (5.x/SMI-SVR4) id AA24303; Mon, 19 Jun 1995 15:45:07 -0400 Date: Mon, 19 Jun 1995 15:45:07 -0400 From: wolperte@knox.pcec.philips.com (ED WOLPERT ) Message-Id: <9506191945.AA24303@eis16.philips.com> To: questions@FreeBSD.org Subject: Three questions: xterm and /etc/services and packages Sender: questions-owner@FreeBSD.org Precedence: bulk Folks- I recently upgraded from 2.0R (cdrom) to 2.0.5... basically just erasing my 2.0, and loading in 2.0.5. I noticed the following two things: 1) the /etc/services file was quite incomplete... where telnet isn't even defined. What happened to this? 2) The xterm (in xfree86 3.1.1u1) doesn't allow the Control-mouse button to work, such as for changing size and what not. I also notice that the xarchie package doesn't allow selection from the menu... what makes it more strange, the emacs (19.28) works fine with the mouse button and control shifts 3) Have the packages been updated yet? I noticed that although I got xpm-3.4e and fvwm1.24r, if I try to use fvwm, I get a libxpm.so error, user defined signal 0. Same is true for olvwm with the xview lib. The 2.0.5 ppp is much more stable, but I've only been able to look at the ppp problem, not the pppd since it wasn't in the kernel... I plan to compile it in tonight. Good job folks. Virtually, Edward Wolpert ------------------------------- "The best way out is always wolperte@knox.pcec.philips.com | through." - Robert Frost wolpert@utk.edu | =============================== 'Give me a shell, and I'll Truth is what you believe. | give you the world.' (tm) ------------------------------- Fnord. From owner-freebsd-questions Mon Jun 19 13:14:51 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA08538 for questions-outgoing; Mon, 19 Jun 1995 13:14:51 -0700 Received: from nevis.oss.interact.net (nevis.oss.interact.net [204.147.85.3]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id NAA08532 for ; Mon, 19 Jun 1995 13:14:50 -0700 Received: (from greg@localhost) by nevis.oss.interact.net (8.6.12/8.6.12) id PAA10784; Mon, 19 Jun 1995 15:14:11 -0500 From: "Greg Rowe" Message-Id: <9506191514.ZM10782@nevis.oss.interact.net> Date: Mon, 19 Jun 1995 15:14:11 -0500 In-Reply-To: wolperte@knox.pcec.philips.com (ED WOLPERT ) "Three questions: xterm and /etc/services and packages" (Jun 19, 3:45pm) References: <9506191945.AA24303@eis16.philips.com> X-Mailer: Z-Mail (3.2.1 15feb95) To: wolperte@knox.pcec.philips.com (ED WOLPERT ), questions@FreeBSD.org Subject: Re: Three questions: xterm and /etc/services and packages Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: questions-owner@FreeBSD.org Precedence: bulk On Jun 19, 3:45pm, ED WOLPERT wrote: > Subject: Three questions: xterm and /etc/services and packages > Folks- > I recently upgraded from 2.0R (cdrom) to 2.0.5... basically just > erasing my 2.0, and loading in 2.0.5. I noticed the following two things: > > 1) the /etc/services file was quite incomplete... where telnet isn't > even defined. What happened to this? This happened to me also the first upgrade I did. I didn't install DES at first and used sysinstall to go back and install it. The services file only had 5 or 6 entries left in it after that. I just reloaded from my 2.0 backups. > > 2) The xterm (in xfree86 3.1.1u1) doesn't allow the Control-mouse > button to work, such as for changing size and what not. I also > notice that the xarchie package doesn't allow selection from the > menu... what makes it more strange, the emacs (19.28) works fine with > the mouse button and control shifts Check your num-lock key. If it's on, the control key won't work properly. > > 3) Have the packages been updated yet? I noticed that although I > got xpm-3.4e and fvwm1.24r, if I try to use fvwm, I get a > libxpm.so error, user defined signal 0. Same is true for olvwm > with the xview lib. I had to rerun ldconfig a number of times during the installation of various ports and packages. "ldconfig /usr/lib:/usr/X11R6/lib:/usr/local/lib" > > The 2.0.5 ppp is much more stable, but I've only been able to look at the ppp > problem, not the pppd since it wasn't in the kernel... I plan to compile it in > tonight. Good job folks. > > Virtually, > Edward Wolpert > > ------------------------------- "The best way out is always > wolperte@knox.pcec.philips.com | through." - Robert Frost > wolpert@utk.edu | > =============================== 'Give me a shell, and I'll > Truth is what you believe. | give you the world.' (tm) > ------------------------------- > > > Fnord. > >-- End of excerpt from ED WOLPERT -- Greg Rowe | US West - Interact Services | INTERNET greg@mn.interact.net 111 Washington Ave. South | Fax: (612) 672-8537 Minneapolis, MN USA 55401 | Voice: (612) 672-8535 To err is human, to really foul up requires the root password. From owner-freebsd-questions Mon Jun 19 15:15:38 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA13639 for questions-outgoing; Mon, 19 Jun 1995 15:15:38 -0700 Received: from maxstrat.com (maxstrat.com [199.182.135.9]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id PAA13627 for ; Mon, 19 Jun 1995 15:15:36 -0700 Received: by maxstrat.com (920330.SGI/1.34) id AA28749; Mon, 19 Jun 95 15:11:53 -0700 Date: Mon, 19 Jun 95 15:11:53 -0700 From: ron@maxstrat.com (Ron Lee) Message-Id: <9506192211.AA28749@maxstrat.com> Apparently-To: questions@FreeBSD.org Sender: questions-owner@FreeBSD.org Precedence: bulk I am looking for some documentation and C-source files for NIS or yellow pages for BSD or other Unix systems. I searched FreeBSD source distribution and I couldn't find sources for Yellow Pages. I was wondering if this is not supported by FreeBSD. I would appreciate any kind of helpful hints in locating the information above. Thanks ron@maxstrat.com From owner-freebsd-questions Mon Jun 19 18:41:26 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id SAA09548 for questions-outgoing; Mon, 19 Jun 1995 18:41:26 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id SAA09527 for ; Mon, 19 Jun 1995 18:41:17 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id LAA21755; Tue, 20 Jun 1995 11:06:06 +0930 From: Michael Smith Message-Id: <199506200136.LAA21755@genesis.atrad.adelaide.edu.au> Subject: Re: Long pauses at startup To: aturetta@stylo.italia.com (Angelo Turetta) Date: Tue, 20 Jun 1995 11:06:05 +0930 (CST) Cc: freebsd-questions@freebsd.org In-Reply-To: <199506191910.VAA02882@unix.stylo.italia.com> from "Angelo Turetta" at Jun 19, 95 05:04:49 pm Content-Type: text Content-Length: 1107 Sender: questions-owner@freebsd.org Precedence: bulk Angelo Turetta stands accused of saying: > > What can it be the problem with my 2.0.5-RELEASE system, if I have to > wait for about one minute before the route_multicast line of sysconfig > is executed, and about 3.5 minutes for route_localhost ? > > I have set host.conf to look first at hosts file, then DNS, and set > entries for localhost & myhost.mydomain is /etc/hosts. > This host is the DNS primary (and only) server for my subnet, so I > think the hosts stuff is right: at startup named is not still running. This is your problem; you're timing out on nameserver lookups. This is something that really annoys me about the standard 2.0.5 distribution, but I couldn't see a clean way around it. > Angelo Turetta. -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Mon Jun 19 19:20:22 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id TAA15279 for questions-outgoing; Mon, 19 Jun 1995 19:20:22 -0700 Received: from whisker.internet-eireann.ie (whisker.internet-eireann.ie [194.9.34.204]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id TAA15252 for ; Mon, 19 Jun 1995 19:20:14 -0700 Received: from localhost (localhost [127.0.0.1]) by whisker.internet-eireann.ie (8.6.11/8.6.9) with SMTP id DAA12631; Tue, 20 Jun 1995 03:20:40 +0100 X-Authentication-Warning: whisker.internet-eireann.ie: Host localhost didn't use HELO protocol To: questions@freebsd.org cc: ficnar@ecf.toronto.edu Subject: FICNAR FRANK G: Re: SB16 problems ... is there a fix yet? Date: Tue, 20 Jun 1995 03:20:40 +0100 Message-ID: <12629.803614840@whisker.internet-eireann.ie> From: "Jordan K. Hubbard" Sender: questions-owner@freebsd.org Precedence: bulk I've never actually used my SB16 for recording - anyone here have an answer for Frank? Thanks! Jordan ------- Forwarded Message Return-Path: <@cannon.ecf.toronto.edu:ficnar@ecf.toronto.edu> Received: from cannon.ecf.toronto.edu (cannon.ecf.toronto.edu [128.100.8.5]) by whisker.internet-eireann.ie (8.6.11/8.6.9) with SMTP id DAA12515 for ; Tue, 20 Jun 1995 03:05:55 +0100 Received: by cannon.ecf.toronto.edu id <5340>; Mon, 19 Jun 1995 22:04:42 -0400 From: FICNAR FRANK G To: jkh@whisker.internet-eireann.ie Subject: Re: SB16 problems ... is there a fix yet? Newsgroups: comp.unix.bsd.freebsd.misc In-Reply-To: References: Organization: University of Toronto, Engineering Computing Facility Message-Id: <95Jun19.220442edt.5340@cannon.ecf.toronto.edu> Date: Mon, 19 Jun 1995 22:04:40 -0400 Greetings, OK ... I am really foolish and can easily count myself among the masses that don't read documentation well enough. It turns out I forgot to change the blah/blah/blah/sound/sound..h file so that the IRQ entry in there matched the config file. I changed that and now I get all the sound output I could have ever wanted .... EXCEPT .... I still don't know how to record properly. If I try cp /dev/audio test.au or cp /dev/dsp test.au I get an "Interrupted system call" ... whatever that is supposed to mean. If I do cp /dev/dsp16 test.au it works and produces a file but I don't quite know what it is recording but it is most definitely NOT the audio from line-in or mic. If I play it back through /dev/dsp16 I get an EXCELLENT reproduction of a 15kHz tone ... AMAZING! It must have used some truely advanced encoding method to come up with that one! Now, my aim is not to put anybody down here because audio recording is not CRUCIAL to my sanity or anything. I think FreeBSD is great and I could not ask for anything more ... I am just having a bit of fun because it is late (for me) and I am getting quite sleep and this right eye of mine is really bothering me because I cannot quite focus it correctly anymore ... Anyway, I suppose my main question now is ... HOW DO I RECORD? Frank Ficnar Oh ya, I was asked last time to include the relevant sections of my config file so here they are ... controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 The IRQ is correct and the DRQ (which I assume is the DMA channel) is correct in the sb0 entry if that refers to 8-bit. The DRQ for sbxvi0 is correct if that refers to a 16-bit channel. All the addresses are correct as well. I also changed the appropriate lines in sound..h concerning the IRQ and the DRQ for the assumed 16-bit channel (it used to read 6.) MANY, MANY Thanks for your help. - -- ========================================== Frank Ficnar ficnar@ecf.toronto.edu http://www.ecf.toronto.edu/~ficnar - ------------------------------------------ ------- End of Forwarded Message From owner-freebsd-questions Mon Jun 19 21:30:27 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id VAA21567 for questions-outgoing; Mon, 19 Jun 1995 21:30:27 -0700 Received: from ix7.ix.netcom.com (ix7.ix.netcom.com [199.182.120.13]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id VAA21561 for ; Mon, 19 Jun 1995 21:30:26 -0700 Received: from by ix7.ix.netcom.com (8.6.12/SMI-4.1/Netcom) id VAA09816; Mon, 19 Jun 1995 21:29:01 -0700 Date: Mon, 19 Jun 1995 21:29:01 -0700 Message-Id: <199506200429.VAA09816@ix7.ix.netcom.com> From: pvinci@ix.netcom.com (Paul Vinciguerra) Subject: LAN Mag: NT better than unix - Why? To: questions@freebsd.org Sender: questions-owner@freebsd.org Precedence: bulk On page 92 of LAN mag., they push NT over unix for httpd. "The NT server will blow the doors off that unix server." They cite the reasons as follows: NT is multithreaded, and it has a richer socket interface. HOW CAN THEY GET AWAY WITH THAT? Doesn't unix also have threaded support? And how does a socket interface increase performance? How do you cut through all the hype? From owner-freebsd-questions Mon Jun 19 22:30:31 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id WAA24014 for questions-outgoing; Mon, 19 Jun 1995 22:30:31 -0700 Received: from quicknet.transport.com (quicknet.transport.com [204.119.17.160]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id WAA24004 for ; Mon, 19 Jun 1995 22:30:27 -0700 Received: (from root@localhost) by quicknet.transport.com (8.6.11/8.6.9) id WAA00517 for freebsd-questions@freebsd.org; Mon, 19 Jun 1995 22:29:10 -0700 Date: Mon, 19 Jun 1995 22:29:10 -0700 From: Tim Bach Message-Id: <199506200529.WAA00517@quicknet.transport.com> To: freebsd-questions@freebsd.org Subject: router card Sender: questions-owner@freebsd.org Precedence: bulk Does anyone know where i can find a cheap 56k frame relay card for BSD or dos?. Or maybe a cheap router..I have seen places selling microrouter 900i for about $900 but looking for something cheaper.. I prefer a card but will consider something else if it's cheap enough. I know a while back i saw somebody beta testing a card and i saved the message but i lost it.. Please email me or phone me your responses 503-230-8850.. Need the information ASAP.. thanks From owner-freebsd-questions Mon Jun 19 22:49:31 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id WAA25699 for questions-outgoing; Mon, 19 Jun 1995 22:49:31 -0700 Received: from yokogawa.co.jp (yhqfm.yokogawa.co.jp [202.33.29.34]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id WAA25680 for ; Mon, 19 Jun 1995 22:49:29 -0700 Received: from sjc.yokogawa.co.jp ([133.140.4.100]) by yokogawa.co.jp (8.6.9+2.4Wb3/3.3Wb4-firewall:08/09/94) with SMTP id OAA08890; Tue, 20 Jun 1995 14:49:27 +0900 Received: from leia.pa.yokogawa.co.jp by sjc.yokogawa.co.jp (4.1/6.4J.6-YOKOGAWA-R/GW) id AA09964; Tue, 20 Jun 95 14:49:26 JST Received: from cabbage by leia.pa.yokogawa.co.jp (16.8/6.4J.6-YOKOGAWA/pa) id AA05808; Tue, 20 Jun 95 14:49:25 +0900 Received: by cabbage.pa.yokogawa.co.jp (16.6/3.3Wb) id AA24881; Tue, 20 Jun 95 14:53:15 +0900 Date: Tue, 20 Jun 95 14:53:15 +0900 From: Mihoko Tanaka Message-Id: <9506200553.AA24881@cabbage.pa.yokogawa.co.jp> To: ken@rflab1.gtri.gatech.edu Cc: freebsd-questions@freefall.cdrom.com In-Reply-To: "Kenneth D. Merry"'s message of Sun, 18 Jun 1995 01:05:05 -0400 (EDT) <199506180505.BAA25875@rflab1.gtri.gatech.edu> Subject: Re: 3COM Ether Link III 3C590 is supported on FreeBSD-2.05? Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: questions-owner@FreeBSD.org Precedence: bulk >>> If possible, I use a 3COM EtherLink III 3C590. >>> Does FreeBSD-2.05 support it ? >> >> I don't believe the 590 is supported. (this is the PCI variant of >>the Etherlink III series) The 509 and I think 579 are supported through >>the ep driver, and I think the 589 is supported through some other driver, >>though. >> Your best bet for a PCI ethernet card is probably to buy an SMC >>card. They are supported. >> If anyone knows anything different about 3c590 support, please >>feel free to correct me... Thank you for your information. Does anyone know when it would be supported ? Mihoko Tanaka ******* YOKOGAWA Electric Corporation ********** From owner-freebsd-questions Mon Jun 19 22:51:35 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id WAA26061 for questions-outgoing; Mon, 19 Jun 1995 22:51:35 -0700 Received: from crh.cl.msu.edu (crh.cl.msu.edu [35.8.1.24]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id WAA26053 for ; Mon, 19 Jun 1995 22:51:31 -0700 Received: (from henrich@localhost) by crh.cl.msu.edu (8.6.11/8.6.9) id BAA00578 for freebsd-questions@freebsd.org; Tue, 20 Jun 1995 01:52:27 -0400 From: Charles Henrich Message-Id: <199506200552.BAA00578@crh.cl.msu.edu> Subject: Problem reports on web? To: freebsd-questions@freebsd.org Date: Tue, 20 Jun 1995 01:52:27 -0400 (EDT) X-Mailer: ELM [version 2.4 PL24] Content-Type: text Content-Length: 235 Sender: questions-owner@freebsd.org Precedence: bulk I was wondering (I havent found) is the problem report database web searchable/viewable anywhere? -Crh Charles Henrich Michigan State University henrich@crh.cl.msu.edu http://rs560.msu.edu/~henrich/ From owner-freebsd-questions Tue Jun 20 01:19:04 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id BAA06988 for questions-outgoing; Tue, 20 Jun 1995 01:19:04 -0700 Received: from late5.e-technik.uni-erlangen.de (late5.e-technik.uni-erlangen.de [131.188.254.132]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id BAA06932 for ; Tue, 20 Jun 1995 01:18:14 -0700 Received: (from eilts@localhost) by late5.e-technik.uni-erlangen.de (8.6.10/8.6.6) id KAA28753; Tue, 20 Jun 1995 10:08:14 +0200 From: Hinrich Eilts Message-Id: <199506200808.KAA28753@late5.e-technik.uni-erlangen.de> Subject: Re: Long pauses at startup To: msmith@atrad.adelaide.edu.au (Michael Smith) Date: Tue, 20 Jun 1995 10:08:13 +0200 (MESZ) Cc: freebsd-questions@freebsd.org In-Reply-To: <199506200136.LAA21755@genesis.atrad.adelaide.edu.au> from "Michael Smith" at Jun 20, 95 11:06:05 am X-Mailer: ELM [version 2.4 PL23] MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Content-Length: 1227 Sender: questions-owner@freebsd.org Precedence: bulk > > Angelo Turetta stands accused of saying: > > > > What can it be the problem with my 2.0.5-RELEASE system, if I have to > > wait for about one minute before the route_multicast line of sysconfig > > is executed, and about 3.5 minutes for route_localhost ? > > > > I have set host.conf to look first at hosts file, then DNS, and set > > entries for localhost & myhost.mydomain is /etc/hosts. > > This host is the DNS primary (and only) server for my subnet, so I > > think the hosts stuff is right: at startup named is not still running. > > This is your problem; you're timing out on nameserver lookups. This is > something that really annoys me about the standard 2.0.5 distribution, but > I couldn't see a clean way around it. > In my case (a local-root nameserver setup) a solution was a /bin/mv /etc/resolv.conf /etc/resolv.CONF at begin of /etc/netstart and a proper renaming at its end. All wanted hosts for netstart have entries in /etc/hosts. Hinrich -- Hinrich Eilts Uni: eilts@late.e-technik.uni-erlangen.de | G i b D O S | Priv.: eilts@tor.dialin.rrze.uni-erlangen.de | k e i n e | http://late5.e-technik.uni-erlangen.de/user/eilts.html | C h a n c e ! | From owner-freebsd-questions Tue Jun 20 02:20:55 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id CAA11647 for questions-outgoing; Tue, 20 Jun 1995 02:20:55 -0700 Received: from aries.ibms.sinica.edu.tw ([140.109.40.248]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id CAA11638 for ; Tue, 20 Jun 1995 02:20:26 -0700 Received: (from taob@localhost) by aries.ibms.sinica.edu.tw (8.6.11/8.6.9) id RAA03278; Tue, 20 Jun 1995 17:18:59 +0800 Date: Tue, 20 Jun 1995 17:18:59 +0800 (CST) From: Brian Tao To: Paul Vinciguerra cc: questions@freebsd.org Subject: Re: LAN Mag: NT better than unix - Why? In-Reply-To: <199506200429.VAA09816@ix7.ix.netcom.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk On Mon, 19 Jun 1995, Paul Vinciguerra wrote: > > "The NT server will blow the doors off that unix server." Do they publish numbers? I'll bet my machine running FreeBSD is a better HTTP server than running NT. ;-) -- Brian ("Though this be madness, yet there is method in't") Tao taob@gate.sinica.edu.tw <-- work ........ play --> taob@io.org From owner-freebsd-questions Tue Jun 20 03:41:12 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id DAA13064 for questions-outgoing; Tue, 20 Jun 1995 03:41:12 -0700 Received: from sbstark.cs.sunysb.edu (sbstark.cs.sunysb.edu [130.245.1.47]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id DAA13058 ; Tue, 20 Jun 1995 03:41:09 -0700 Received: (from root@localhost) by sbstark.cs.sunysb.edu (8.6.12/8.6.9) with UUCP id GAA24249; Tue, 20 Jun 1995 06:39:54 -0400 Received: (from gene@localhost) by starkhome.cs.sunysb.edu (8.6.11/8.6.9) id GAA19980; Tue, 20 Jun 1995 06:40:25 -0400 Date: Tue, 20 Jun 1995 06:40:25 -0400 From: Gene Stark Message-Id: <199506201040.GAA19980@starkhome.cs.sunysb.edu> To: "Jordan K. Hubbard" Cc: ficnar@ecf.toronto.edu, questions@freebsd.org In-reply-to: "Jordan K. Hubbard"'s message of Tue, 20 Jun 1995 03:20:40 +0100 Subject: FICNAR FRANK G: Re: SB16 problems ... is there a fix yet? References: <12629.803614840@whisker.internet-eireann.ie> Sender: questions-owner@freebsd.org Precedence: bulk >I've never actually used my SB16 for recording - anyone here have an >answer for Frank? Thanks! My experience with the SB16 is exactly as Frank describes. I spent a short time looking over the sound code to try to see if there was an easy fix, but got lost in the spaghetti :-< - Gene From owner-freebsd-questions Tue Jun 20 04:03:21 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id EAA15781 for questions-outgoing; Tue, 20 Jun 1995 04:03:21 -0700 Received: from nietzsche (annex1s34.urc.tue.nl [131.155.12.44]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id EAA15772 ; Tue, 20 Jun 1995 04:03:15 -0700 Received: from localhost (localhost [127.0.0.1]) by nietzsche (8.6.9/8.6.9) with ESMTP id KAA05716; Tue, 20 Jun 1995 10:23:54 +0100 Message-Id: <199506200923.KAA05716@nietzsche> X-Mailer: exmh version 1.5.3 12/28/94 To: "Jordan K. Hubbard" cc: questions@freebsd.org, ficnar@ecf.toronto.edu Subject: Re: FICNAR FRANK G: Re: SB16 problems ... is there a fix yet? In-reply-to: jkh's message of Tue, 20 Jun 1995 03:20:40 +0100. <12629.803614840@whisker.internet-eireann.ie> Date: Tue, 20 Jun 1995 10:23:52 +0100 From: Marc van Kempen Sender: questions-owner@freebsd.org Precedence: bulk > I've never actually used my SB16 for recording - anyone here have an > answer for Frank? Thanks! > > Jordan > I have tried to make it work and failed to too. I used nas and it does produce a recording, but when it is played it is very silent. I used xmmix to set the recording device to mic and adjusted the volume.I also tried catting from the /dev/audio to a file, but no sensible recording either. So I'd very much like to know the answer to this question too. Marc. ---------------------------------------------------- Marc van Kempen wmbfmk@urc.tue.nl He's dead Jim ..., kick him if you don't believe me. From owner-freebsd-questions Tue Jun 20 04:09:28 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id EAA16015 for questions-outgoing; Tue, 20 Jun 1995 04:09:28 -0700 Received: from datasrv.co.il (root@zeus.datasrv.co.il [192.114.20.2]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id EAA15998 ; Tue, 20 Jun 1995 04:09:22 -0700 Received: from elexmgw.elex.co.il by datasrv.co.il with SMTP id AA11722 (5.65c/IDA-1.4.4); Tue, 20 Jun 1995 14:09:02 +0300 Received: from elex.co.il (tlhuph12) by elexmgw.elex.co.il (4.1/SMI-4.1-allowed) id AA05590; Tue, 20 Jun 95 14:04:46 IDT Received: from cpm.elex.co.il (tlcpmfh1.elex.co.il) by elex.co.il with ESMTP (1.37.109.14/16.2) id AA209536287; Tue, 20 Jun 1995 14:04:48 +0300 Received: from tlcpmh34 by cpm.elex.co.il with SMTP (1.37.109.15/16.2) id AA156826260; Tue, 20 Jun 1995 14:04:20 +0300 Received: by tlcpmh34 (1.37.109.4/15.6) id AA03822; Tue, 20 Jun 95 14:04:57 +0300 Date: Tue, 20 Jun 1995 13:53:01 -0200 (IST) From: Edward Beili Subject: Looking for "Root" To: questions@FreeBSD.org Cc: hackers@FreeBSD.org Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk Hi. I am trying to contact Edgar (Root) at with no luck. All mail is returned with: "Returned mail: User unknown" message. Could he or someone who knows his "real" address reply. Thenks a lot, sorry for bothering all of you, -Edward -- __ Edward Beili | e-mail: edward@cpm.elex.co.il _|__|_ | edwardb@cs.huji.ac.il //-0__ Telrad Telecommunication and Electronic Industries Ltd. /^^ '>> Lod, Israel | / \\ // | tel: (972) 2 363-093 (home) / \\/ | (972) 8 273-646 (work) ( //\\ \ // \\ All the opinions expressed are my own \__/ \\__..____________________________________________ From owner-freebsd-questions Tue Jun 20 04:55:19 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id EAA17172 for questions-outgoing; Tue, 20 Jun 1995 04:55:19 -0700 Received: from ns.aic.net (ns.aic.net [194.67.30.65]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id EAA17166 ; Tue, 20 Jun 1995 04:55:05 -0700 Received: (from root@localhost) by ns.aic.net (8.6.9/8.6.9) id PAA00275; Tue, 20 Jun 1995 15:35:29 GMT Date: Tue, 20 Jun 1995 15:35:29 GMT From: Root Message-Id: <199506201535.PAA00275@ns.aic.net> To: edward@cpm.elex.co.il, questions@FreeBSD.org Subject: Re: Looking for "Root" Cc: hackers@FreeBSD.org Sender: questions-owner@FreeBSD.org Precedence: bulk DEAR Edward, and all on the net, EXCUSE ME FOR ANY INCONVENCIES!!! Our Sun SPARCcenter was in fire two days ago, and we'vef'gd restored it today :-(. It costs to us about $34.000 :-(((((((((!!!!! EXCUSE ME again. PS Dear Edward, I will write you as soon as possible!!! :-) -edd -- Edgar Der-Danieliantz AIC Research Laboratories Inc AIC "When your Sun SPARCcenter is in fire, go to Sun and ask them, WHY???!!! + -edd From owner-freebsd-questions Tue Jun 20 05:34:52 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id FAA17777 for questions-outgoing; Tue, 20 Jun 1995 05:34:52 -0700 Received: from inet-gw-3.pa.dec.com (inet-gw-3.pa.dec.com [16.1.0.33]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id FAA17771 for ; Tue, 20 Jun 1995 05:34:50 -0700 Received: from osabs0.osa.dec.com by inet-gw-3.pa.dec.com (5.65/24Feb95) id AA27169; Tue, 20 Jun 95 05:34:27 -0700 Received: by osabs0.osa.dec.com (5.57/ULTRIX-fma-041391); id AA22966; Tue, 20 Jun 95 21:33:24 +0900 Received: by osou15.osa.dec.com; (5.65/1.1.8.2/05Oct94-1005AM) id AA25629; Tue, 20 Jun 1995 21:32:49 +0900 Date: Tue, 20 Jun 1995 21:32:49 +0900 From: Inoguchi Message-Id: <9506201232.AA25629@osou15.osa.dec.com> Apparently-To: questions@FreeBSD.org Sender: questions-owner@FreeBSD.org Precedence: bulk Hello, I have a question about BSD packet filter. I'm using RELEASE 2.0.5, now. I want to read/write from/to bpf. I could read from bpf, but can't write ! I tested again and again, but can't put packet to Ethernet. write() system call didn't return error code until buffer was full. It seems that everything I wrote to bpf stayed in system buffer. Please tell me ! Kinichiro Inoguchi From owner-freebsd-questions Tue Jun 20 06:18:13 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA19404 for questions-outgoing; Tue, 20 Jun 1995 06:18:13 -0700 Received: from inet-gw-2.pa.dec.com (inet-gw-2.pa.dec.com [16.1.0.23]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id GAA19398 for ; Tue, 20 Jun 1995 06:18:10 -0700 Received: from osabs0.osa.dec.com by inet-gw-2.pa.dec.com (5.65/24Feb95) id AA10616; Tue, 20 Jun 95 06:14:08 -0700 Received: by osabs0.osa.dec.com (5.57/ULTRIX-fma-041391); id AA23068; Tue, 20 Jun 95 22:14:09 +0900 Received: by osou15.osa.dec.com; (5.65/1.1.8.2/05Oct94-1005AM) id AA25735; Tue, 20 Jun 1995 22:13:34 +0900 Date: Tue, 20 Jun 1995 22:13:34 +0900 From: Inoguchi Message-Id: <9506201313.AA25735@osou15.osa.dec.com> Apparently-To: questions@FreeBSD.org Sender: questions-owner@FreeBSD.org Precedence: bulk I forgot to put with sample code. Thanks / Kinichiro Inoguchi ----------------------------------------------------------------------- Hello, I have a question about BSD packet filter. I'm using RELEASE 2.0.5, now. I want to read/write from/to bpf. I could read from bpf, but can't write ! I tested again and again, but can't put packet to Ethernet. write() system call didn't return error code until buffer was full. It seems that everything I wrote to bpf stayed in system buffer. Please tell me ! Kinichiro Inoguchi ------------------------------------------------------------------------ #include #include #include #include #include #include #include #include #define ETHERTYPE_DLI 0x6006 struct bpf_insn insns[] = { BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12), BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETHERTYPE_DLI, 0, 1), BPF_STMT(BPF_RET+BPF_K, (u_int)-1), BPF_STMT(BPF_RET+BPF_K, 0), }; int main() { int ists; int fd; struct bpf_program bpfprog; unsigned short sval; struct ifreq ifReq; u_int flag; int bufsiz; char *buf; unsigned char sim_addr[6] = {0xaa, 0x00, 0x04, 0x00, 0x96, 0xff}; unsigned char osoi_addr[6] = {0x08, 0x00, 0x2b, 0x3c, 0xfd, 0x6d}; /* open device */ if((fd = open("/dev/bpf0", O_WRONLY)) < 0) { perror("open"); exit(0); } /* binding */ memset(&ifReq, 0, sizeof(struct ifreq)); strcpy(ifReq.ifr_name, "le0"); if(ioctl(fd, BIOCSETIF, &ifReq)) { perror("setif"); exit(0); } flag = 1; if(ioctl(fd, BIOCIMMEDIATE, &flag) < 0) { perror("immediate"); exit(0); } if(ioctl(fd, BIOCPROMISC) < 0) { perror("promisc"); exit(0); } /* filter settings */ bpfprog.bf_len = sizeof(insns) / sizeof(struct bpf_insn); bpfprog.bf_insns = insns; if(ioctl(fd, BIOCSETF, &bpfprog) < 0) { perror("SETF"); exit(0); } if(ioctl(fd, BIOCGBLEN, &bufsiz) < 0) { perror("gblen"); exit(0); } buf = (char *) malloc(bufsiz); memset(buf, 0, bufsiz); /* create packet to send */ memmove(&buf[0], sim_addr, 6); memmove(&buf[6], osoi_addr, 6); sval = htons(0x6006); memmove(&buf[12], &sval, 2); sval = 2; memmove(&buf[14], &sval, 2); /* send packet */ ists = write(fd, buf, 18); if(ists < 0) { perror("write"); } } From owner-freebsd-questions Tue Jun 20 06:37:12 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA20263 for questions-outgoing; Tue, 20 Jun 1995 06:37:12 -0700 Received: from bronze.coil.com (bronze.coil.com [198.4.94.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id GAA20257 for ; Tue, 20 Jun 1995 06:37:11 -0700 Received: from localhost (echet@localhost) by bronze.coil.com (8.6.4/8.6.12) id JAA02522 for questions@freebsd.org; Tue, 20 Jun 1995 09:39:30 -0400 From: Eric Chet Message-Id: <199506201339.JAA02522@bronze.coil.com> Subject: libXpm.so.4.5 To: questions@freebsd.org Date: Tue, 20 Jun 1995 09:39:19 -0400 (EDT) X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 220 Sender: questions-owner@freebsd.org Precedence: bulk Hello I just installed xemacs from packages. When I execute it, xemacs says it can't find libXpm.so.4.5. Where can I find this library? I used ldconfig to makesure my ld.so is current. Thanks Eric - echet@coil.com From owner-freebsd-questions Tue Jun 20 07:35:40 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA22355 for questions-outgoing; Tue, 20 Jun 1995 07:35:40 -0700 Received: from wpdis01.wpafb.af.mil (wpdis01.wpafb.af.mil [192.12.64.3]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id HAA22348 for ; Tue, 20 Jun 1995 07:35:39 -0700 Received: by wpdis01.wpafb.af.mil id AA17960; Tue, 20 Jun 95 10:35:35 -0400 Message-Id: <9506201435.AA17960@wpdis01.wpafb.af.mil> Date: Tue, 20 Jun 95 10:35:35 -0400 From: deanj@wpdis01.wpafb.af.mil (SrA Jeffrey Dean SRA) Subject: I messed up!!! To: questions@FreeBSD.ORG Sender: questions-owner@FreeBSD.ORG Precedence: bulk HELP!!! Over the weekend, I downloaded the FreeBSD-current source onto my 486DX/50 and proceded to make world!!!! I was under the assumtion that it had been a couple of weeks since my last upgrade, and it would be a good idea to recomplie some of the newer changes using cron in the background. Well, when I came in to work yesturday, I realized that I will probably have many many problems because this "source" has been largely updated to 2.0.5... Now, I was able to get this system back up and running about 99% of the way, except I cannot configure my DNS service. Right now, I believe I have a mix of 2.0.5 and 2.0R. A very very bad thing!!! I know you all would like to hit me, but I have already punished myself with what it has done to my box. I am having trouble getting inetd to utilize our dns server. I am getting a "protocol not supported" error durring bootup when she tries to add the default domain name server durring netstart. I skimmed through all my .conf files in /etc, and also peeked at /etc/protocols. But most of this info in protocols is foreign to me. Help!! Can anybody enlighten me... Jeff Dean deanj@wpdis01.wpafb.af.mil From owner-freebsd-questions Tue Jun 20 07:55:02 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA22929 for questions-outgoing; Tue, 20 Jun 1995 07:55:02 -0700 Received: from halloran-eldar.lcs.mit.edu (halloran-eldar.lcs.mit.edu [18.26.0.159]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id HAA22920 for ; Tue, 20 Jun 1995 07:54:59 -0700 Received: by halloran-eldar.lcs.mit.edu; (5.65/1.1.3.6) id AA10254; Tue, 20 Jun 1995 10:54:56 -0400 Date: Tue, 20 Jun 1995 10:54:56 -0400 From: Garrett Wollman Message-Id: <9506201454.AA10254@halloran-eldar.lcs.mit.edu> To: pvinci@ix.netcom.com (Paul Vinciguerra) Cc: questions@freebsd.org Subject: LAN Mag: NT better than unix - Why? In-Reply-To: <199506200429.VAA09816@ix7.ix.netcom.com> References: <199506200429.VAA09816@ix7.ix.netcom.com> Sender: questions-owner@freebsd.org Precedence: bulk < On page 92 of LAN mag., they push NT over unix for httpd. > "The NT server will blow the doors off that unix server." > They cite the reasons as follows: NT is multithreaded, and it has a > richer socket interface. > HOW CAN THEY GET AWAY WITH THAT? Because, like all trade rags, they are paid flacks for their advertisers, and aren't smart enough to form opinions on their own. Microsoft has the largest advertising budget in the software industry. Therefore, lots of people will write all sorts of nonsense to keep them happy. > Doesn't unix also have threaded support? And how does a socket > interface increase performance? It doesn't. As I said, they people who write for these magazines aren't generally competent enough to understand what they're writing about. What you read was likely a direct paraphrase from a MS press release. > How do you cut through all the hype? Don't read trade mags, they make your brain rot. Especially don't let your management read them, unless you are absolutely certain that they have a clue. -GAWollman -- Garrett A. Wollman | Shashish is simple, it's discreet, it's brief. ... wollman@lcs.mit.edu | Shashish is the bonding of hearts in spite of distance. Opinions not those of| It is a bond more powerful than absence. We like people MIT, LCS, ANA, or NSA| who like Shashish. - Claude McKenzie + Florent Vollant From owner-freebsd-questions Tue Jun 20 08:11:45 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA23663 for questions-outgoing; Tue, 20 Jun 1995 08:11:45 -0700 Received: from relay.iunet.it (relay.iunet.it [192.106.1.2]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id IAA23651 for ; Tue, 20 Jun 1995 08:11:21 -0700 Received: from pm.eng.it by relay.iunet.it with SMTP id AA25233 (5.65c8/IDA-1.4.4 for ); Tue, 20 Jun 1995 17:16:18 +0200 Received: by pm.eng.it (5.x/SMI-SVR4) id AA00519; Tue, 20 Jun 1995 16:22:53 -0100 Date: Tue, 20 Jun 1995 16:22:53 -0100 From: orazio@pm.eng.it (orazio viele) Message-Id: <9506201722.AA00519@pm.eng.it> To: questions@FreeBSD.org Subject: PPP connection X-Sun-Charset: US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk Dear Friends, I bought FreeBSD 2.0 CD-Rom from Walnut Creek and I installed on PC 486. It's all OK. I configured PPP according to description in the file FAQ/PPP.doc. My PC calls a SPARCstation 2 with Solaris 2.4, the login procedure is OK, but pppd prints the following message: "Sorry - PPP is not available on this system" What is the problem ? Thank you in advance. Regards Orazio Viele From owner-freebsd-questions Tue Jun 20 08:28:47 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA24436 for questions-outgoing; Tue, 20 Jun 1995 08:28:47 -0700 Received: from ns.aic.net (ns.aic.net [194.67.30.65]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id IAA24347 for ; Tue, 20 Jun 1995 08:28:06 -0700 Received: (from root@localhost) by ns.aic.net (8.6.9/8.6.9) id TAA02839; Tue, 20 Jun 1995 19:24:54 GMT Date: Tue, 20 Jun 1995 19:24:54 GMT From: Root Message-Id: <199506201924.TAA02839@ns.aic.net> To: orazio@pm.eng.it, questions@FreeBSD.org Subject: Re: PPP connection Sender: questions-owner@FreeBSD.org Precedence: bulk I think you should build your kernel with ppp enabled (using config). Anyway, on some other syss/machines it does. Am I right? -edd From owner-freebsd-questions Tue Jun 20 08:40:31 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA25000 for questions-outgoing; Tue, 20 Jun 1995 08:40:31 -0700 Received: from pancake.remcomp.fr (root@pancake.remcomp.fr [194.51.30.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id IAA24989 for ; Tue, 20 Jun 1995 08:40:04 -0700 Received: (from didier@localhost) by zapata.omnix.fr.org (8.6.9/8.6.9) id PAA04582 for questions@freebsd.org; Tue, 20 Jun 1995 15:14:24 +0200 From: Didier Derny Message-Id: <199506201314.PAA04582@zapata.omnix.fr.org> Subject: HELP! Help! I need some Help! To: questions@freebsd.org Date: Tue, 20 Jun 1995 15:14:23 +0200 (MET DST) X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 385 Sender: questions-owner@freebsd.org Precedence: bulk Hi I have a serious problem with the System V IPC under FreeBSD 2.0. The list given by ipcs is garbaged and I'm unable to run ipcrm. But the IPC seems to be working. I dont have the standard paramters for the system V IPC. I'm using a log of these resources. Thanks for your help -- +---------------------+ | Didier Derny | | didier@omnix.fr.org | +---------------------+ From owner-freebsd-questions Tue Jun 20 08:49:13 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA25437 for questions-outgoing; Tue, 20 Jun 1995 08:49:13 -0700 Received: from gaudi.diatel.upm.es (gaudi.diatel.upm.es [138.100.49.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id IAA25426 for ; Tue, 20 Jun 1995 08:48:44 -0700 Received: by gaudi.diatel.upm.es (4.1/SMI-4.1) Tue, 20 Jun 95 17:43:50 +0200 X400-Received: by mta diatel.upm in /PRMD=/ADMD=/C=/; Relayed; Tue, 20 Jun 1995 17:43:46 UTC+0200 X400-Received: by /PRMD=iris/ADMD=mensatex/C=es/; Relayed; Tue, 20 Jun 1995 17:43:46 UTC+0200 Date: Tue, 20 Jun 1995 17:43:46 UTC+0200 X400-Originator: jmrueda@diatel.upm.es X400-Recipients: non-disclosure:; X400-Content-Type: P2-1984 (2) X400-Mts-Identifier: [/PRMD=iris/ADMD=mensatex/C=es/;950620174346] Content-Identifier: 733 Conversion: Prohibited From: Javier Martin Rueda To: questions@freebsd.org Message-Id: <733*/S=jmrueda/OU=diatel/O=upm/PRMD=iris/ADMD=mensatex/C=es/@MHS> Subject: frequent errors "tty-level buffer overflow" Mime-Version: 1.0 (Generated by Ean X.400 to MIME gateway) Sender: questions-owner@freebsd.org Precedence: bulk I have a 486DX2-66 that is serving two printers: a PostScript connected to the paralell port, and an HP LaserJet III connected to the serial port at 9600 bps. The serial port has a 16450 UART. Quite often I'm getting messages such as: ... sio0: 961 more tty-level buffer overflows (total 103188) sio0: 960 more tty-level buffer overflows (total 104148) sio0: 960 more tty-level buffer overflows (total 105108) ... And print jobs are output incorrectly, because chars seem to be lost. The man page for sio(4) says that is a problem in the application. At 19200 bps, things are worse, and almost any print job has errors. My printcap entry for the printer is: lj|hp|HPLaserJetIII:\ :br#9600:lp=/dev/cuaa0:mx#0:sh:\ :lf=/var/spool/lpd/ljlog:sd=/var/spool/output/lpd/lj:\ :af=/var/spool/lpd/ljacct:if=/usr/local/bin/contapcl: If anybody has encountered and solved this problem, can you please tell me how? Thanks in advance. Note: although that is not the only activity of the machine, it is idle or with a low load of work most of the time. From owner-freebsd-questions Tue Jun 20 08:50:47 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA25540 for questions-outgoing; Tue, 20 Jun 1995 08:50:47 -0700 Received: from gaudi.diatel.upm.es (gaudi.diatel.upm.es [138.100.49.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id IAA25531 for ; Tue, 20 Jun 1995 08:50:23 -0700 Received: by gaudi.diatel.upm.es (4.1/SMI-4.1) Tue, 20 Jun 95 17:45:57 +0200 X400-Received: by mta diatel.upm in /PRMD=/ADMD=/C=/; Relayed; Tue, 20 Jun 1995 17:45:54 UTC+0200 X400-Received: by /PRMD=iris/ADMD=mensatex/C=es/; Relayed; Tue, 20 Jun 1995 17:45:54 UTC+0200 Date: Tue, 20 Jun 1995 17:45:54 UTC+0200 X400-Originator: jmrueda@diatel.upm.es X400-Recipients: non-disclosure:; X400-Content-Type: P2-1984 (2) X400-Mts-Identifier: [/PRMD=iris/ADMD=mensatex/C=es/;950620174554] Content-Identifier: 734 Conversion: Prohibited From: Javier Martin Rueda To: questions@freebsd.org Message-Id: <734*/S=jmrueda/OU=diatel/O=upm/PRMD=iris/ADMD=mensatex/C=es/@MHS> Subject: frequent errors "tty-level buffer overflow" (ammendment) Mime-Version: 1.0 (Generated by Ean X.400 to MIME gateway) Sender: questions-owner@freebsd.org Precedence: bulk Sorry, in my previous message I forgot to say that I'm using 950412-SNAP. From owner-freebsd-questions Tue Jun 20 09:56:39 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA28744 for questions-outgoing; Tue, 20 Jun 1995 09:56:39 -0700 Received: from alpha.xerox.com (alpha.Xerox.COM [13.1.64.93]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id JAA28738 for ; Tue, 20 Jun 1995 09:56:38 -0700 Received: from gemini.sdsp.mc.xerox.com ([13.252.21.73]) by alpha.xerox.com with SMTP id <15028(2)>; Tue, 20 Jun 1995 09:55:40 PDT Received: by gemini.sdsp.mc.xerox.com (4.1/SMI-4.1) id AA09244; Tue, 20 Jun 95 12:55:33 EDT Message-Id: <9506201655.AA09244@gemini.sdsp.mc.xerox.com> To: questions@freebsd.org Subject: NE2000 on 2.0 Date: Tue, 20 Jun 1995 09:55:31 PDT From: "Marty Leisner" Sender: questions-owner@freebsd.org Precedence: bulk I finally got freebsd running on a PC (I installed it on the main drive on another PC, I have two PCs, one running Linux with 2Gigabytes of disk, and I want a simpler one to run freebsd... Both machines have NE2000 Linksys clones...no problem with linux... However, I've had nothing but grief with freebsd... I have ed1 mapped to interrupt 4/port 0x300 (this works with linux) [I used the boot loader -c option) and get: ed1: device timeout (consistently) ip is working (I can ping localhost) but I can't: ping a remote host ping the bsd machine from a remote host... I also want to install a cross-compiling environment on linux to make freebsd executables...and kernels... marty leisner@sdsp.mc.xerox.com Member of the League for Programming Freedom (http://www.lpf.org) Any sufficiently advanced technology is indistinguishable from magic Arthur C. Clarke, The Lost Worlds of 2001 From owner-freebsd-questions Tue Jun 20 10:19:13 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA29464 for questions-outgoing; Tue, 20 Jun 1995 10:19:13 -0700 Received: from gemsgw.med.ge.com (gemsgw.med.ge.com [192.88.230.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id KAA29457 for ; Tue, 20 Jun 1995 10:19:12 -0700 Received: from gemed.med.ge.com by gemsgw.med.ge.com (4.1/GEMS-1.1) id AA11669; Tue, 20 Jun 95 12:18:18 CDT Received: from sol.sol.med.ge.com (sol-gw) by gemed.med.ge.com (4.1/SMI-4.1) id AA06795; Tue, 20 Jun 95 12:18:36 CDT Received: from merak.med.ge.com by sol.sol.med.ge.com (4.1/SMI-4.1) id AA12623; Tue, 20 Jun 95 12:18:00 CDT From: laufen@sol.med.ge.com (Derek Laufenberg x7-4534) Received: by merak.med.ge.com (4.1/client-1.3) id AA25237; Tue, 20 Jun 95 12:17:59 CDT Date: Tue, 20 Jun 95 12:17:59 CDT Message-Id: <9506201717.AA25237@merak.med.ge.com> To: questions@freebsd.org, leisner@sdsp.mc.xerox.com Subject: Re: NE2000 on 2.0 Sender: questions-owner@freebsd.org Precedence: bulk > > I finally got freebsd running on a PC (I installed it on the > main drive on another PC, I have two PCs, one running Linux > with 2Gigabytes of disk, and I want a simpler one to run > freebsd... > > Both machines have NE2000 Linksys clones...no problem with linux... > > However, I've had nothing but grief with freebsd... > > I have ed1 mapped to interrupt 4/port 0x300 (this works with linux) > [I used the boot loader -c option) > > and get: > > ed1: device timeout (consistently) Sounds like the IRQ or port is not getting set right. Are you sure setting it correctly with the -c? What type of card is it and how did you initially set the IRQ and port of the card? Does a lsdev show ed1? To get my NE2000 clone to work I had to set the irq & port on the card via some DOS software and use the -c option to config the kernel. > > ip is working (I can ping localhost) > but I can't: > ping a remote host > ping the bsd machine from a remote host... > > I also want to install a cross-compiling environment on linux > to make freebsd executables...and kernels... > > > > marty leisner@sdsp.mc.xerox.com > Member of the League for Programming Freedom (http://www.lpf.org) > Any sufficiently advanced technology is indistinguishable from magic > Arthur C. Clarke, The Lost Worlds of 2001 > Good luck, Derek Laufenberg laufen@sol.med.ge.com From owner-freebsd-questions Tue Jun 20 10:49:57 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA00309 for questions-outgoing; Tue, 20 Jun 1995 10:49:57 -0700 Received: from lambda (lambda.demon.co.uk [158.152.17.124]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id KAA00187 ; Tue, 20 Jun 1995 10:48:34 -0700 Received: (from paul@localhost) by lambda.demon.co.uk (8.6.11/8.6.9) id RAA04991; Tue, 20 Jun 1995 17:03:51 +0100 From: Paul Richards Message-Id: <199506201603.RAA04991@lambda.demon.co.uk> Subject: Re: OKI320 installation on FreeBSD v.2.0 To: SurfMWB@aol.com, questions@freebsd.org Date: Tue, 20 Jun 1995 17:03:50 +0100 (BST) Cc: paul@freebsd.org In-Reply-To: <950619220928_74216286@aol.com> from "SurfMWB@aol.com" at Jun 19, 95 10:09:30 pm Reply-to: paul@freebsd.org X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=UK-ASCII Content-Transfer-Encoding: 8bit Content-Length: 652 Sender: questions-owner@freebsd.org Precedence: bulk In reply to SurfMWB@aol.com who said > Forwarded to questions: > I can't seem to get the printer to work...could you give me direction in > order to set it up? Also..I would like to allow other DOS PCs to be able to > retrieve mail from my UNIX box that are networked via TCP/IP, are you aware > of any applications that will allow me to do that. I am using pine on the > UNIX. I would appreciate any help you can give me. Thank you. > > Thanks. > > -- Paul Richards, Bluebird Computer Systems. FreeBSD core team member. Internet: paul@FreeBSD.org, http://www.freebsd.org/~paul Phone: 0370 462071 (Mobile), +44 1222 457651 (home) From owner-freebsd-questions Tue Jun 20 11:28:12 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id LAA02343 for questions-outgoing; Tue, 20 Jun 1995 11:28:12 -0700 Received: from quicknet.transport.com (quicknet.transport.com [204.119.17.160]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id LAA02337 for ; Tue, 20 Jun 1995 11:28:10 -0700 Received: (from root@localhost) by quicknet.transport.com (8.6.11/8.6.9) id LAA09131 for freebsd-questions@freebsd.org; Tue, 20 Jun 1995 11:27:01 -0700 Date: Tue, 20 Jun 1995 11:27:01 -0700 From: Tim Bach Message-Id: <199506201827.LAA09131@quicknet.transport.com> To: freebsd-questions@freebsd.org Subject: Problem's with two 3.6 gig SCSI drives Sender: questions-owner@freebsd.org Precedence: bulk Well my two hardisk's and computer fell to the ground. Since then i have been getting ton's of errors... I think it might have originally been the first hardrive but now but of them are screwed. I have done a fsck and it has removed a bunch of errors and say's every is ok basicly.. But when i try to access certain directories or files it panics or gives me such and such file not found and abort's whatever it was doing. Everytime it panics and reboot's a bunch of new error's crop up and i go on. fscking it.. keep repeating this until i get tired.. So i decide to try and backup it all.. Turn's out when i do try to back it up it actually creates error's on the other drive i know is good. Right now i just want to backup what i can...Alot of the files are perfectly fine but when i try and back it up it hit's a certain area or whatever and everything is garbage after that. So what i want to know is if there is something better then fsck i can use on my 3.6 gig SCSI drive running under adaptec controller. Or maybe a way of just copying all the files without copying the errors. I tried cp,mv,tar,and zip all for some reason manage to copy errors to the error drive which basicly are unfixable with fsck. What would really be nice if there was something like norton disk doctor for unix... It's badly needed that's for sure..If there isnt please something think about creaating something like that for FreeBSD. Sure would add to the value of it. Please email any responses thanks. From owner-freebsd-questions Tue Jun 20 11:31:03 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id LAA02654 for questions-outgoing; Tue, 20 Jun 1995 11:31:03 -0700 Received: from csc.com (explorer.csc.com [20.1.10.27]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id LAA02647 for ; Tue, 20 Jun 1995 11:30:59 -0700 Received: by csc.com (Smail3.1.29.1 #1) id m0sO846-000iGJC; Tue, 20 Jun 95 14:30 EDT Date: Tue, 20 Jun 1995 14:30:21 -0400 (EDT) From: Stefan Vanrafelghem To: freebsd-questions@freebsd.org Subject: 486DX2 FreeBSD boot.flp problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk This is my second posting concerning this problem. Thanks to those of you who responded to my first message, and got me a little farther along in trouble-shooting this. Unfortunately, I still cannot get my PC to boot up from the boot.flp floppy. I gave the floppy to a friend, to try on his PC, and it worked fine! So I guess it's not the floppy. "WHAT'S WRONG WITH MY PC?!?!" I started taking the PC apart last night just to get more familiar with it, so I thought I'd post some of the information about it here, in case anyone sees any obvious problems. It's a 486DX2 with 16 meg of RAM BIOS is AMI-BIOS (dated 6/6/92) AMI=American Megatrends Inc. It has a Future Domain SCSI controller, which seems to be controlling: one floppy drive two hard drives (1 Conner 1.4G and 1 Maxtor 240Meg) one double speed CD-ROM. It also has a "Stealth 32" video card. I don't know who manufactured the mother-board, but several of the chips have "OPTi" labelled on them... (please excuse my ignorance.) If anyone knows of any problems with any of these devices please let me know. Thanks, Stefan J. Van Rafelghem svanrafe@csc.com From owner-freebsd-questions Tue Jun 20 13:05:45 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA09906 for questions-outgoing; Tue, 20 Jun 1995 13:05:45 -0700 Received: from gwa.ericsson.com (gwa.ericsson.com [198.215.127.2]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id NAA09891 for ; Tue, 20 Jun 1995 13:05:42 -0700 Received: from mr2.exu.ericsson.se (mr2.exu.ericsson.com [138.85.147.12]) by gwa.ericsson.com (8.6.10/8.6.10) with ESMTP id PAA18329 for ; Tue, 20 Jun 1995 15:05:10 -0500 Received: from noah.lmc.ericsson.se (noah.lmc.ericsson.se [142.133.1.1]) by mr2.exu.ericsson.se (8.6.8/NAHUB-MR1.1) with ESMTP id PAA14317 for ; Tue, 20 Jun 1995 15:05:08 -0500 Received: from haddock.lmc.ericsson.se (haddock.lmc.ericsson.se [142.133.45.19]) by noah.lmc.ericsson.se (8.6.4/8.6.4) with ESMTP id QAA27176 for ; Tue, 20 Jun 1995 16:05:05 -0400 Received: from localhost (lmcsato@localhost) by haddock.lmc.ericsson.se (8.6.4/8.6.4) id QAA15947; Tue, 20 Jun 1995 16:06:08 -0400 Date: Tue, 20 Jun 1995 16:06:08 -0400 (EDT) From: Samy Touati To: questions@FreeBSD.org Subject: Running 2.0 applications on 2.05 ? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk Hi, I would like to know if the binaries that used to run on 2.0 will run on 2.0.5 ? For example will the netscape application still run? What are the differences between the 2.0 and 2.0.5 that will prevent a complete binary compatibility? Samy From owner-freebsd-questions Tue Jun 20 13:32:44 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA14597 for questions-outgoing; Tue, 20 Jun 1995 13:32:44 -0700 Received: from grendel.csc.smith.edu (grendel.csc.smith.edu [131.229.222.23]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id NAA14589 for ; Tue, 20 Jun 1995 13:32:39 -0700 Received: from localhost (jfieber@localhost) by grendel.csc.smith.edu (8.6.5/8.6.5) id QAA04020 for questions@freebsd.org; Tue, 20 Jun 1995 16:34:14 -0400 Received: from freefall.cdrom.com (freefall.cdrom.com [192.216.222.4]) by grendel.csc.smith.edu (8.6.5/8.6.5) with ESMTP id QAA03993 for ; Tue, 20 Jun 1995 16:25:08 -0400 Received: from jovanet.jovanet.com (JOVANET.COM [204.80.138.2]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id NAA14369 for ; Tue, 20 Jun 1995 13:23:28 -0700 Received: from jovanet.com by jovanet.jovanet.com; Tue, 20 Jun 95 13:23 PDT Date: Tue, 20 Jun 1995 13:07:09 -0700 (PDT) From: Anthony Mendoza To: www@freebsd.org Subject: FreeBSD v2.0 Message-ID: MIME-Version: 1.0 Content-Length: 406 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk is FreeBSD v2.0 full BSD compliant? I have a digiboard product that will work with BSDi, will that work with FreeBSD? Thanks... if not...what terminal servers will? Anthony Mendoza tmendoza@jovanet.com ------------------------------------------------------------------------ JovaNet Communications Your Full Internet Service Provider telnet: jovanet.com dialup: (310) 577-5810 voice : (310) 577-5800 From owner-freebsd-questions Tue Jun 20 13:56:21 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA15730 for questions-outgoing; Tue, 20 Jun 1995 13:56:21 -0700 Received: from gordius.gordian.com (gordius.gordian.com [192.73.220.81]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id NAA15724 for ; Tue, 20 Jun 1995 13:56:17 -0700 Received: from hermes (hermes.gordian.com [192.73.220.111]) by gordius.gordian.com (8.6.11/8.6.5) with SMTP id NAA06661; Tue, 20 Jun 1995 13:55:45 -0700 Received: by hermes (920330.SGI/920502.SGI) for @gordius.gordian.com:freebsd-questions@freebsd.org id AA07025; Tue, 20 Jun 95 13:55:34 -0700 Date: Tue, 20 Jun 95 13:55:34 -0700 From: steve@gordian.com (Steve Khoo) Message-Id: <9506202055.AA07025@hermes> To: root@quicknet.transport.com Cc: freebsd-questions@freebsd.org In-Reply-To: <199506200529.WAA00517@quicknet.transport.com> (message from Tim Bach on Mon, 19 Jun 1995 22:29:10 -0700) Subject: Re: router card Sender: questions-owner@freebsd.org Precedence: bulk >>>>> "Tim" == Tim Bach writes: Tim> Does anyone know where i can find a cheap 56k frame relay Tim> card for BSD or dos?. Or maybe a cheap router..I have seen Tim> places selling microrouter 900i for about $900 but looking Tim> for something cheaper.. I prefer a card but will consider Tim> something else if it's cheap enough. I know a while back i Tim> saw somebody beta testing a card and i saved the message but Tim> i lost it.. Please email me or phone me your responses Tim> 503-230-8850.. Need the information ASAP.. thanks How about a 128kbps ISDN card for ~$400 or maybe less? DigiBoard DataFire ISDN LAN Adapter. It's an ISA-bus board. It has a built in NT1 and provide ISDN U interface to connect directly to your ISDN phone line. I heard about it from one of my friend. I don't know if there's a FreeBSD driver. From owner-freebsd-questions Tue Jun 20 13:58:08 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA15938 for questions-outgoing; Tue, 20 Jun 1995 13:58:08 -0700 Received: from mpp.com (mpp.Minn.Net [204.157.201.242]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id NAA15918 ; Tue, 20 Jun 1995 13:58:04 -0700 Received: (from mpp@localhost) by mpp.com (8.6.11/8.6.9) id PAA08866; Tue, 20 Jun 1995 15:53:44 -0500 From: Mike Pritchard Message-Id: <199506202053.PAA08866@mpp.com> Subject: Re: PPP connection To: orazio@pm.eng.it (orazio viele) Date: Tue, 20 Jun 1995 15:53:44 -0500 (CDT) Cc: questions@freebsd.org, faq@freebsd.org In-Reply-To: <9506201722.AA00519@pm.eng.it> from "orazio viele" at Jun 20, 95 04:22:53 pm X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1585 Sender: questions-owner@freebsd.org Precedence: bulk > I bought FreeBSD 2.0 CD-Rom from Walnut Creek and I installed on PC 486. It's all OK. > I configured PPP according to description in the file FAQ/PPP.doc. My PC calls a SPARCstation 2 with Solaris 2.4, the login procedure is OK, but pppd prints the following message: > > "Sorry - PPP is not available on this system" > > What is the problem ? You need to configure PPP into your kernel. Take a look at the changes to the PPP faq below. To someone maintaining the FAQs (or anyone with commit privs), I really do think that we should apply this patch to the PPP FAQ. *** tmp/ppp.FAQ Sun Jun 11 15:05:32 1995 --- ppp.FAQ Sun Jun 11 15:24:39 1995 *************** *** 4,10 **** Before you start setting up PPP on your machine make sure that pppd is located in /usr/sbin and directory /etc/ppp ! exists. pppd can work in two modes: --- 4,19 ---- Before you start setting up PPP on your machine make sure that pppd is located in /usr/sbin and directory /etc/ppp ! exists. Also make sure that PPP is configured into your kernel. ! First, run "ifconfig -a" and see if "ppp0" appears in the ! list of devices. If not, add the following line to your ! kernel configuration file and rebuild your kernel: ! ! pseudo-device ppp 1 #Point-to-point protocol ! ! If the "pppd" command prints a message stating that "PPP is not ! available on this system", then you have not properly configured ! PPP into your kernel. pppd can work in two modes: -- Mike Pritchard mpp@legarto.minn.net "Go that way. Really fast. If something gets in your way, turn" From owner-freebsd-questions Tue Jun 20 14:03:05 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA16180 for questions-outgoing; Tue, 20 Jun 1995 14:03:05 -0700 Received: from easynet.com (easy1.easynet.com [199.2.26.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id OAA16173 for ; Tue, 20 Jun 1995 14:03:04 -0700 Received: by easynet.com (Smail3.1.28.1 #7) id m0sOAS8-000renC; Tue, 20 Jun 95 14:03 WET DST Message-Id: From: brian@MediaCity.com (Brian Litzinger) Subject: Conner 1.05 GB Wide no work To: freebsd-questions@freebsd.org Date: Tue, 20 Jun 1995 14:03:19 -0700 (PDT) X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 481 Sender: questions-owner@freebsd.org Precedence: bulk I reported a few days ago to this forum that I was getting various Timeout errors from an adaptec 2940W when accessing a Conner 1.05GB Wide drive. I tried turning off disconnection, sync, and wide negotitation and the problem seemed to get worse. I hooked up a Micropolis (sp) 8863MB wide drive and it work flawlessly, so I'm inclined that this point to blame the Conner drives. I'm going to try a couple of other drives and see what happens. Brian Litzinger brian@easynet.com From owner-freebsd-questions Tue Jun 20 14:25:06 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA17175 for questions-outgoing; Tue, 20 Jun 1995 14:25:06 -0700 Received: from iworks.InterWorks.org (iworks.interworks.org [128.255.18.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id OAA17127 for ; Tue, 20 Jun 1995 14:23:42 -0700 Received: by iworks.InterWorks.org (1.37.109.8/16.2) id AA09508; Tue, 20 Jun 1995 16:16:53 -0500 Message-Id: <9506202116.AA09508@iworks.InterWorks.org> Date: Tue, 20 Jun 1995 16:16:53 -0500 From: "Daniel M. Eischen" To: brian@easynet.com, freebsd-questions@FreeBSD.org Subject: Re: Conner 1.05 GB Wide no work Sender: questions-owner@FreeBSD.org Precedence: bulk >I reported a few days ago to this forum that I was getting >various Timeout errors from an adaptec 2940W when accessing >a Conner 1.05GB Wide drive. > >I tried turning off disconnection, sync, and wide negotitation and >the problem seemed to get worse. > >I hooked up a Micropolis (sp) 8863MB wide drive and it work flawlessly, >so I'm inclined that this point to blame the Conner drives. > >I'm going to try a couple of other drives and see what happens. I can verify that it works with a Fujitsu 2694 Wide drive. I've been running the aic7xxx driver on it since early this year. Dan Eischen deischen@iworks.InterWorks.org From owner-freebsd-questions Tue Jun 20 14:52:47 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA18370 for questions-outgoing; Tue, 20 Jun 1995 14:52:47 -0700 Received: from disperse.demon.co.uk (disperse.demon.co.uk [158.152.1.77]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id OAA18360 for ; Tue, 20 Jun 1995 14:52:45 -0700 Received: from post.demon.co.uk by disperse.demon.co.uk id aa04789; 20 Jun 95 22:34 +0100 Received: from wind.demon.co.uk by post.demon.co.uk id aa28699; 20 Jun 95 22:34 +0100 Date: Tue, 20 Jun 95 22:14:43 Message-ID: <134@wind.demon.co.uk> From: Jason Tanner Organization: Shortwave Systems Limited Reply-To: jt@wind.demon.co.uk To: questions@freebsd.org Subject: FreeBSD Installation problems. X-Mailer: Newswin Alpha 0.7 Lines: 65 Sender: questions-owner@freebsd.org Precedence: bulk Hello! I recently bought the FreeBSD CDROM from Walnut Creek. Version 2.0. (about a week ago in fact) and I am having a few problems with it and was wondering if you could offer any suggestions. I followed the installation instructions (I think). I used the provided dos utility to repartition my hard disk such that my DOS one was 401MB and the FreeBSD one would be 115MB. I created the boot floppy and cpio floppy. Set the disk geometry using the FDISK utility on the boot floppy to 1048 cyl 16 head 63 sect (= 516 MB) and edited the partition information as recommended in the instructions. I wrote out the boot record and the O/S boot selector stuff. I then used the DiskLabel utility to edit the slices and assign mount points. I then proceeded. Doing AltF2 revelaed no errors. When I booted I was presented with the F1 (DOS), F2 (FreeBSD) menu. F1 works fine butF2 simply access the hard disk and then returns to the menu. Rebooting with the boot floppy does usually take me back to the installation utility but after a variable number of attempts (when trying to investigate the problem) eventually caused an init failure then a panic message. My system configuration is: Gateway 2000 P5-90 (90Mhz Pentium) 16 MB Ram 516MB IDE Hard Disk. AMIBIOS Matrox Video Card 17" Monitor. The pertinent BIOS setup info is: Cyln Head Sect Size Drive C: Type AUTO-CONFIG 1048 16 63 516MB Drive C: Timeout 5 seconds IDE DMA Transfer Mode : Disabled IDE Multiple Sector mode : Disabled IDE LBA Translations : Enable DOS FDISK Info is: 1 fixed disk Partition Status Type VolumeLabel Mbytes System Usage C: 1 A PRIDOS FAT-DISK 401 FAT16 78% 2 Non-DOS 115 22% Jason. -- ----------------------------------------------------------------- Jason Tanner | Internet : jt@wind.demon.co.uk Shortwave Systems Limited | Compuserve: 100012.423@compuserve.com ----------------------------------------------------------------- From owner-freebsd-questions Tue Jun 20 15:11:56 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA19782 for questions-outgoing; Tue, 20 Jun 1995 15:11:56 -0700 Received: from jd-unix.wpafb.af.mil (jd-unix.wpafb.af.mil [129.52.114.42]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id PAA19776 for ; Tue, 20 Jun 1995 15:11:55 -0700 Received: (from root@localhost) by jd-unix.wpafb.af.mil (8.6.11/8.6.9) id SAA00240; Tue, 20 Jun 1995 18:13:29 GMT Date: Tue, 20 Jun 1995 18:13:29 +0000 () From: Charlie ROOT To: Jason Tanner cc: questions@freebsd.org Subject: Re: FreeBSD Installation problems. In-Reply-To: <134@wind.demon.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk I'll give you a bunch of suggestions!!!! 1. Backup all your data to tape --if possible. 2. Make your FreeBSD partition 400MEG and your DOS part 110MEG. (At least try to set your FreeBSD to around 250M) 3. Make sure that your CDROM is being mounted when the kernel boots -try a "fd(0,a)/kernel -c" you should be able to view all of yur devices (including an attached cdrom drive. 4. After your bootdisk can see the cdrom drive, then it will be able to load the FreeBSD from the cdrom drive to you FreeBSD partition. From what I got here in your message, you are correctly setting up your hard drive, but not getting unix to load onto it. Don't even attemp to reboot your PC and expect to see a unix prompt until the installation software has transferred 15Megs or more of data to your Hardrive, and says that it was (key words) "COMPLETELY SUCCESSFUL" Jeff Dean (one of those guys who's reloaded unix about 100 times --think im gettin good) On Tue, 20 Jun 1995, Jason Tanner wrote: > Hello! > > I recently bought the FreeBSD CDROM from Walnut Creek. Version > 2.0. (about a week ago in fact) and I am having a few problems > with it and was wondering if you could offer any suggestions. > > I followed the installation instructions (I think). > > I used the provided dos utility to repartition my hard disk > such that my DOS one was 401MB and the FreeBSD one would be > 115MB. > > I created the boot floppy and cpio floppy. Set the disk > geometry using the FDISK utility on the boot floppy to > 1048 cyl 16 head 63 sect (= 516 MB) and edited the > partition information as recommended in the instructions. > I wrote out the boot record and the O/S boot selector > stuff. > > I then used the DiskLabel utility to edit the slices > and assign mount points. > > I then proceeded. Doing AltF2 revelaed no errors. > When I booted I was presented with the F1 (DOS), > F2 (FreeBSD) menu. F1 works fine butF2 simply access > the hard disk and then returns to the menu. > > Rebooting with the boot floppy does usually take > me back to the installation utility but after > a variable number of attempts (when trying to > investigate the problem) eventually caused an > init failure then a panic message. > > My system configuration is: > > Gateway 2000 P5-90 (90Mhz Pentium) > 16 MB Ram > 516MB IDE Hard Disk. > AMIBIOS > Matrox Video Card > 17" Monitor. > > The pertinent BIOS setup info is: > Cyln Head Sect Size > Drive C: Type AUTO-CONFIG 1048 16 63 516MB > Drive C: Timeout 5 seconds > > IDE DMA Transfer Mode : Disabled > IDE Multiple Sector mode : Disabled > IDE LBA Translations : Enable > > DOS FDISK Info is: > > 1 fixed disk > Partition Status Type VolumeLabel Mbytes System Usage > C: 1 A PRIDOS FAT-DISK 401 FAT16 78% > 2 Non-DOS 115 22% > > Jason. > -- > ----------------------------------------------------------------- > Jason Tanner | Internet : jt@wind.demon.co.uk > Shortwave Systems Limited | Compuserve: 100012.423@compuserve.com > ----------------------------------------------------------------- > > From owner-freebsd-questions Tue Jun 20 17:24:13 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id RAA23908 for questions-outgoing; Tue, 20 Jun 1995 17:24:13 -0700 Received: from ibmmail.COM (ibmmail.com [199.171.26.3]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id RAA23902 for ; Tue, 20 Jun 1995 17:24:12 -0700 From: auwbcpar@ibmmail.com Message-Id: <199506210024.RAA23902@freefall.cdrom.com> Received: from ibmmail by ibmmail.COM (IBM VM SMTP V2R3) with BSMTP id 2036; Tue, 20 Jun 95 20:24:19 EDT Date: Tue, 20 Jun 1995 20:27:40 EDT To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: general Sender: questions-owner@freebsd.org Precedence: bulk --- Received from NSW.RICHARP X55041 21-06-95 10.22 -> IBMMAIL.I1466824 IBMMAIL CONNECTION Hi, I have just purchased a copy of the FreeBSD 2.0 CDROM and have a couple of questions about it. 1 - Do you know if anyone is writing or has written a CDROM driver for either a CDROM via a SOUNDBLASTER interface or for a CDROM as another IDE drive (I currently have an IDE hard disk and would like to add a CDROM drive as the second drive, and I know of someone who is doing this with LINUX). 2 - Can you suggest a good source of technical information about FreeDSB, either on the NET or technical manuals that may be available. I would like some documentation about rebuilding the KERNEL and writing device drivers specifically. PS. is it ok to send technical questions here. Any assistance you can give will be appreciated. Paul Richardson Sydney, Australia From owner-freebsd-questions Tue Jun 20 19:21:32 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id TAA26947 for questions-outgoing; Tue, 20 Jun 1995 19:21:32 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id TAA26941 for ; Tue, 20 Jun 1995 19:21:21 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id LAA23943; Wed, 21 Jun 1995 11:45:39 +0930 From: Michael Smith Message-Id: <199506210215.LAA23943@genesis.atrad.adelaide.edu.au> Subject: Re: NE2000 on 2.0 To: leisner@sdsp.mc.xerox.com (Marty Leisner) Date: Wed, 21 Jun 1995 11:44:21 +0930 (CST) Cc: questions@freebsd.org In-Reply-To: <9506201655.AA09244@gemini.sdsp.mc.xerox.com> from "Marty Leisner" at Jun 20, 95 09:55:31 am Content-Type: text Content-Length: 1598 Sender: questions-owner@freebsd.org Precedence: bulk Marty Leisner stands accused of saying: > I have ed1 mapped to interrupt 4/port 0x300 (this works with linux) > [I used the boot loader -c option) I'm amused. Do you have serial ports in this machine? > and get: > > ed1: device timeout (consistently) This means that the board has not delivered a 'transmit complete' interrupt. You get this when your _hardware_ isn't working; because it's configured incorrectly or because it's broken. > ip is working (I can ping localhost) > but I can't: > ping a remote host Have you sniffed the network to see whether packets are getting out? I suspect that they are, but of course you can't _receive_ them coming back. > ping the bsd machine from a remote host... That's obvious 8) > I also want to install a cross-compiling environment on linux > to make freebsd executables...and kernels... Don't. It's not worth your sanity. Export a couple hundred meg from your Linux box via NFS and install the FreeBSD tools natively. You'll get to discover how wonderful (not) Linux's NFS performance is, but you'll save yourself the trauma of having to support the BSD build tools on a system that they were never meant to run on. > marty leisner@sdsp.mc.xerox.com -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Tue Jun 20 20:06:07 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id UAA27933 for questions-outgoing; Tue, 20 Jun 1995 20:06:07 -0700 Received: from efn.efn.org (root@efn.org [198.68.17.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id UAA27925 for ; Tue, 20 Jun 1995 20:06:05 -0700 Received: from haus.efn.org.efn.org by efn.efn.org (4.1/smail2.5/05-07-92) id AA07370; Tue, 20 Jun 95 20:05:51 PDT Received: by haus.efn.org.efn.org (4.1/SMI-4.1) id AA03542; Tue, 20 Jun 95 20:05:50 PDT Date: Tue, 20 Jun 1995 20:05:50 -0700 (PDT) From: John-Mark Gurney To: Jose Marques Cc: FreeBSD-questions@freefall.cdrom.com Subject: Re: Setting up telnet for anonymous lynx access? In-Reply-To: Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk On Tue, 13 Jun 1995, Jose Marques wrote: > Does anybody have any tips they can give me for setting up telnet for use > with anonymous lynx. Basically I would like to know the best way to stop > escaping to shell etc. Any pointers would be most welcome. I have it set up on my machine... but the root partion somehow crashed durning looking at the 2.0.5 Boot floppy... but here is what I remeber... first of all you need to run lynx with the anonymous flag... I forget what it is... then I forget if you can run it directly from the passwd file or if you need to make a shell script... hope this helps some.. TTYL... John-Mark Gurney gurney_j@efn.org -or- gurney_j@4j.lane.edu -or- Fido: John-Mark Gurney @ 1:152/56.2 From owner-freebsd-questions Tue Jun 20 20:09:58 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id UAA28187 for questions-outgoing; Tue, 20 Jun 1995 20:09:58 -0700 Received: from Nastassja.esfm.ipn.mx (esfm.ipn.mx [148.204.102.129]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id UAA28180 for ; Tue, 20 Jun 1995 20:09:48 -0700 Received: by Nastassja.esfm.ipn.mx (AIX 3.2/UCB 5.64/4.03) id AA14816; Tue, 20 Jun 1995 21:05:36 -0600 Date: Tue, 20 Jun 1995 21:05:35 -0600 (CST) From: Eduardo Viruena Silva To: questions@freebsd.org Subject: 3c509 & mitsumi Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk Hello there, I own a mitsumi cd model CRMC-LU005S and an ethernet card 3c509. I have known that FreeBSD have some problems with 3c509 but I don't mind, I have to try. I have noticed that ethernet card is found in address: 0x300 and so is mitsumi cd. Well, somebody has to know where they must be put in order than FreeBSD can find them both. Do you know such addresses ? (Please don't answer: "Yes, we do." Please send them to me) Thanks in advance... Eduardo Viruena. From owner-freebsd-questions Tue Jun 20 20:24:59 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id UAA28523 for questions-outgoing; Tue, 20 Jun 1995 20:24:59 -0700 Received: from kksys.skypoint.net (kksys.skypoint.net [199.86.32.5]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id UAA28517 for ; Tue, 20 Jun 1995 20:24:54 -0700 Received: from starfire.mn.org by kksys.skypoint.net with smtp (Smail3.1.29.1 #2) id m0sOGNF-0004nuC; Tue, 20 Jun 95 22:22 CDT Received: (from john@localhost) by starfire.mn.org (8.6.8/1.2.1) id WAA28061 for questions@FreeBSD.org; Tue, 20 Jun 1995 22:24:05 -0500 From: John Lind Message-Id: <199506210324.WAA28061@starfire.mn.org> Subject: dump verification To: questions@FreeBSD.org (FreeBSD questions) Date: Tue, 20 Jun 1995 22:24:04 -0500 (CDT) X-Mailer: ELM [version 2.4 PL23] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 282 Sender: questions-owner@FreeBSD.org Precedence: bulk Has anyone written or know of a dump verification program? I thought maybe restore would have that capability, like gtar's -W or --verify, but I didn't see anything... John Lind, Starfire Consulting Services E-mail: john@starfire.MN.ORG USnail: PO Box 17247, Mpls MN 55417 From owner-freebsd-questions Tue Jun 20 20:33:34 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id UAA28816 for questions-outgoing; Tue, 20 Jun 1995 20:33:34 -0700 Received: from gold.interlog.com (root@gold.interlog.com [198.53.145.2]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id UAA28810 for ; Tue, 20 Jun 1995 20:33:31 -0700 Received: from dgenn.interlog.com (dgenn.interlog.com [199.212.156.40]) by gold.interlog.com (8.6.10/8.6.10) with SMTP id XAA13031 for ; Tue, 20 Jun 1995 23:33:27 -0400 Date: Tue, 20 Jun 1995 23:33:27 -0400 Message-Id: <199506210333.XAA13031@gold.interlog.com> X-Sender: dgenn@gold.interlog.com (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: questions@FreeBSD.org From: dgenn@interlog.com (Dan Gennidakis) Subject: Install Probs Sender: questions-owner@FreeBSD.org Precedence: bulk I have set up partitions properly and followed the install utility for FreeBSD 2.0R on walnut's cdrom Jan1995. i am wondering about the part of the install that asks for me to assign myself to agroup and for a password.What is the supervisor group it's asking for if i want to login as su(instaed of root, and guest)i.e what should i enter in the dialog if i am the administrator? From owner-freebsd-questions Tue Jun 20 21:13:21 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id VAA00175 for questions-outgoing; Tue, 20 Jun 1995 21:13:21 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id VAA00169 for ; Tue, 20 Jun 1995 21:13:10 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id NAA24324 for questions@freebsd.org; Wed, 21 Jun 1995 13:40:17 +0930 From: Michael Smith Message-Id: <199506210410.NAA24324@genesis.atrad.adelaide.edu.au> Subject: 2.0.5R CD's / subscription To: questions@freebsd.org Date: Wed, 21 Jun 1995 13:39:37 +0930 (CST) Content-Type: text Content-Length: 813 Sender: questions-owner@freebsd.org Precedence: bulk A simple question for those in the know: I'd like to join the FreeBSD CD subscription program, however AFAIK, walnuts are still shipping 2.0R, and I already have one of those. Their web pages still offer 2.0R as the 'current' version, which implies that the 2.0.5 disks aren't back from duplication yet. Thus : What should I do to join the subscription program and ensure that the first item I receive is the 2.0.5R set? -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Tue Jun 20 21:14:11 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id VAA00223 for questions-outgoing; Tue, 20 Jun 1995 21:14:11 -0700 Received: from relay.hp.com (relay.hp.com [15.255.152.2]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id VAA00217 for ; Tue, 20 Jun 1995 21:14:01 -0700 Received: from hpmwtd.sr.hp.com by relay.hp.com with SMTP (1.37.109.16/15.5+ECS 3.3) id AA194618040; Tue, 20 Jun 1995 21:14:00 -0700 Received: from hpnmhjw.sr.hp.com by hpmwtd.sr.hp.com with SMTP (15.11.1.6/15.5+ECS 3.3) id AA01095; Tue, 20 Jun 95 21:13:59 -0700 Received: from mina.sr.hp.com by hpnmhjw.sr.hp.com with SMTP (1.37.109.15/15.5+ECS 3.3) id AA002138037; Tue, 20 Jun 1995 21:13:57 -0700 Message-Id: <199506210413.AA002138037@hpnmhjw.sr.hp.com> To: leisner@sdsp.mc.xerox.com (Marty Leisner), questions@freebsd.org Subject: Re: NE2000 on 2.0 In-Reply-To: Your message of "Wed, 21 Jun 1995 11:44:21 +0930." <199506210215.LAA23943@genesis.atrad.adelaide.edu.au> Date: Tue, 20 Jun 1995 21:13:56 -0700 From: Darryl Okahata Sender: questions-owner@freebsd.org Precedence: bulk > Marty Leisner stands accused of saying: > > > and get: > > > > ed1: device timeout (consistently) > > This means that the board has not delivered a 'transmit complete' > interrupt. > > You get this when your _hardware_ isn't working; because it's configured > incorrectly or because it's broken. This is mostly implied by the phrase, "configured incorrectly" (and by Michael's comment about serial ports), but I want to emphasize that this problem can be caused by an interrupt conflict (e.g., two boards configured to use the same IRQ). The NE2000 clone could be configured correctly, but some other board (possibly the serial port) could be misconfigured to use the same IRQ. I know -- I ran into this exact problem a couple of days ago. ;-) -- Darryl Okahata Internet: darrylo@sr.hp.com DISCLAIMER: this message is the author's personal opinion and does not constitute the support, opinion or policy of Hewlett-Packard or of the little green men that have been following him all day. From owner-freebsd-questions Tue Jun 20 21:48:11 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id VAA00998 for questions-outgoing; Tue, 20 Jun 1995 21:48:11 -0700 Received: from westhill.cdrom.com (westhill.cdrom.com [192.216.223.147]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id VAA00992 for ; Tue, 20 Jun 1995 21:48:10 -0700 Received: from localhost.cdrom.com (localhost.cdrom.com [127.0.0.1]) by westhill.cdrom.com (8.6.11/8.6.11) with SMTP id VAA11145 ; Tue, 20 Jun 1995 21:47:33 -0700 X-Authentication-Warning: westhill.cdrom.com: Host localhost.cdrom.com didn't use HELO protocol To: Michael Smith cc: questions@freebsd.org Subject: Re: 2.0.5R CD's / subscription In-reply-to: Your message of "Wed, 21 Jun 1995 13:39:37 +0930." <199506210410.NAA24324@genesis.atrad.adelaide.edu.au> Date: Tue, 20 Jun 1995 21:47:33 -0700 Message-ID: <11143.803710053@westhill.cdrom.com> From: Gary Palmer Sender: questions-owner@freebsd.org Precedence: bulk In message <199506210410.NAA24324@genesis.atrad.adelaide.edu.au>, Michael Smith writes: > Thus : What should I do to join the subscription program and > ensure that the first item I receive is the 2.0.5R set? Ask for the subscribtion plan that starts with the NEXT CDROM to ship - we have order codes for that in our database. Gary From owner-freebsd-questions Tue Jun 20 23:10:28 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id XAA02413 for questions-outgoing; Tue, 20 Jun 1995 23:10:28 -0700 Received: from efn.efn.org (gurney_j@efn.org [198.68.17.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id XAA02407 for ; Tue, 20 Jun 1995 23:10:25 -0700 Received: by efn.efn.org (4.1/smail2.5/05-07-92) id AA19162; Tue, 20 Jun 95 23:10:14 PDT Date: Tue, 20 Jun 1995 23:10:13 -0700 (PDT) From: John-Mark Gurney To: Howard Lew Cc: questions@FreeBSD.org Subject: Re: 3 Hard Drives via EIDE Accel. Card In-Reply-To: Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk On Sat, 17 Jun 1995, Howard Lew wrote: > > I was wondering if anyone has had success with using 3 IDE hard drives under > FreeBSD with a 2HD/2FD controller and one of those EIDE Accelerator > cards that support the third. > > Or can I use 2 regular IDE cards? And I have also heard about 4HD/4FD > controllers... How well do they work with FreeBSD? > > Any info is appreciated. it works very well... right now I am using a vlb card that has dual IDE channels... I used to have four IDE hard drives running on it... but now I have two IDE drives, one on each channel... you can use another ide controller you just need to make sure that it does change the irq to something other than 14... I have some winbond controlers that allow you to set the ide channel to a second channel but I have not gotten those to work... TTYL... John-Mark Gurney gurney_j@efn.org -or- gurney_j@4j.lane.edu -or- Fido: John-Mark Gurney @ 1:152/56.2 From owner-freebsd-questions Tue Jun 20 23:18:18 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id XAA02610 for questions-outgoing; Tue, 20 Jun 1995 23:18:18 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id XAA02604 for ; Tue, 20 Jun 1995 23:18:14 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id PAA24516 for questions@freebsd.org; Wed, 21 Jun 1995 15:45:24 +0930 From: Michael Smith Message-Id: <199506210615.PAA24516@genesis.atrad.adelaide.edu.au> Subject: Socks proxy under 2.0? To: questions@freebsd.org Date: Wed, 21 Jun 1995 15:45:23 +0930 (CST) Content-Type: text Content-Length: 575 Sender: questions-owner@freebsd.org Precedence: bulk Hiho, just want a quick chat with anyone that has the socks proxy daemon running under FreeBSD 2.0R. I had a quick squizz through the ports collection without seeing it, so I thought I'd ask 8) -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Tue Jun 20 23:40:39 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id XAA02863 for questions-outgoing; Tue, 20 Jun 1995 23:40:39 -0700 Received: from mail.telstra.com.au (mail.telstra.com.au [192.148.160.10]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id XAA02857 for ; Tue, 20 Jun 1995 23:40:37 -0700 Received: from mail_gw.fwall.telecom.com.au(192.148.147.10) by mail via smap (V1.3) id sma019779; Wed Jun 21 15:46:40 1995 Received: from cdn_mail.dn.itg.telecom.com.au(144.135.109.134) by mail_gw.telecom.com.au via smap (V1.3) id sma012853; Wed Jun 21 16:37:09 1995 Received: from amalfi.trl.OZ.AU (amalfi.trl.OZ.AU [137.147.99.99]) by cdn_mail.telecom.com.au (8.6.11/8.6.9) with ESMTP id QAA06752 for ; Wed, 21 Jun 1995 16:37:08 +1000 Received: from orca1.vic.design.telecom.com.au ([145.136.55.131]) by amalfi.trl.OZ.AU (8.6.10/8.6.12) with SMTP id QAA28332 for ; Wed, 21 Jun 1995 16:37:00 +1000 Received: from netbsd08.dn.itg.telecom.com.au by orca1.vic.design.telecom.com.au with SMTP (1.37.109.4/16.2) id AA19136; Wed, 21 Jun 95 16:36:56 +1000 Received: from netbsd08.dn.itg.telecom.com.au (netbsd08.dn.itg.telecom.com.au [144.139.63.32]) by netbsd08.dn.itg.telecom.com.au (8.6.8/8.6.6) with SMTP id PAA01542 for ; Wed, 21 Jun 1995 15:02:27 +0800 Date: Wed, 21 Jun 1995 15:02:25 +0800 (WST) From: Terry Dwyer To: questions@freebsd.org Subject: Sony CDU76s quad speed SCSI-II cdrom - Compatible? Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk Is anybody using one of these with either 1.1X or 2.0.5R that can tell me what features they have, and what are missing WRT the `Ideal' (tm) CD-ROM drive. The reason I am asking is that I have a choice between the Sony, (A$389), and a Toshiba quad speed, (which is about A$175 more expensive) If the Sony doesn't suffer much in the feature department and is happy under FreeBSD, I could probably afford to buy 2, - 1 for my DOS box as well. I couldn't find any details about particular models of CD-ROM's on www.freebsd.org so I'm asking here... _-_|\ Terry Dwyer E-Mail: tdwyer@netbsd08.dn.itg.telecom.com.au / \ System Administrator Phone: +61 9 491 5161 Fax: +61 9 221 2631 *_.^\_/ Telecom Australia Telstra Corporation MIME capable mailer v Perth WA ( I do not speak for Telstra or Telecom ) From owner-freebsd-questions Wed Jun 21 04:56:30 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id EAA16366 for questions-outgoing; Wed, 21 Jun 1995 04:56:30 -0700 Received: from cc.jyu.fi (root@cc.jyu.fi [130.234.0.6]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id EAA16360 for ; Wed, 21 Jun 1995 04:56:27 -0700 Received: from [130.234.41.39] (zaphod.maccc.jyu.fi) by cc.jyu.fi with SMTP id AA26215 (5.67a/IDA-1.4.4 for freebsd-questions@freefall.cdrom.com); Wed, 21 Jun 1995 14:58:08 +0300 X-Sender: kallio@pop.jyu.fi Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Wed, 21 Jun 1995 14:58:29 +0300 To: freebsd-questions@freefall.cdrom.com From: kallio@jyu.fi (Seppo Kallio) Subject: ** mlock test -> panic, cannot mount partitions - please help ** Sender: questions-owner@FreeBSD.org Precedence: bulk I did try to reserve out of use 32MB of my 64MB memory for test purposes with the program main() { char *p; int i; p = malloc(10000000); i = mlock(p,10000000); sleep(1200); exit; } (Maybe not 100% same, I cannot use the disk at this moment :-( ) And intended to run it 3 times. I did run it as root one time! This got the whole machine down. At boot root mount OK, but fsck: /dev/sd0s1f. No such file or directory Can't stat /dev/sd0s1f same with /dev/sd01e mount -a: /dev/sd01f on /home: no such file or directory same with /dev/sd01e procfs: I/O error I have /home and /usr I did run same program with 1MB memory area and had no problems. It seemed to reserve the 1MB of RAM. I promise never to try this again. ;-) Can I somehow get these partitions mounted? Seppo PS. Is there some other safer method to disable big parts of RAM? I wanted to compare one 32MB Linux machine to my 64MB FreeBSD machine. I think, I cannot disable RAM in hardware, I have 2*32MB SIMMs. -- +-- Seppo Kallio ----- kallio@jyu.fi ---+ ! Computing Center ! Fax +358-41-603611 Phone +358-41-603606 ! ! University of Jyvaskyla ! http://www.jyu.fi/~kallio ! +-- Finland --+-- 62.14N 25.44E -- + From owner-freebsd-questions Wed Jun 21 05:07:49 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id FAA16678 for questions-outgoing; Wed, 21 Jun 1995 05:07:49 -0700 Received: from specgw.spec.co.jp (specgw.spec.co.jp [202.32.13.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id FAA16672 for ; Wed, 21 Jun 1995 05:07:45 -0700 Received: from tama3.spec.co.jp (tama3 [202.32.13.252]) by specgw.spec.co.jp (8.6.5/3.3Wb-SPEC) with SMTP id VAA24088; Wed, 21 Jun 1995 21:02:53 +0900 Message-Id: <9506211212.AA00064@tama3.spec.co.jp.spec.co.jp> Date: Wed, 21 Jun 1995 21:12:44 +0900 From: Atsushi Murai To: brian@MediaCity.com Cc: freebsd-questions@freebsd.org Subject: Re: Conner 1.05 GB Wide no work In-Reply-To: X-Mailer: AL-Mail 0.94Beta Sender: questions-owner@freebsd.org Precedence: bulk brian@MediaCity.com (Brian Litzinger) wrote: :I reported a few days ago to this forum that I was getting :various Timeout errors from an adaptec 2940W when accessing :a Conner 1.05GB Wide drive. : :I tried turning off disconnection, sync, and wide negotitation and :the problem seemed to get worse. Check the firmware version, Because old firmware of conner has fatal bug in their cahce architecutre - 256K Bytes write/read by one issue a scsi command it's messed up their cache. It's never occure on dos enviroment. Addition I couldn't point out the version but you may try to check conner's bbs and get firmware upgaration. Atsushi. -- Atsushi Murai E-Mail: amurai@spec.co.jp SPEC Voice : +81-3-3833-5341 System Planning and Engineering Corp. From owner-freebsd-questions Wed Jun 21 06:01:33 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA18880 for questions-outgoing; Wed, 21 Jun 1995 06:01:33 -0700 Received: from tserv.lodgenet.com (root@dial12.iw.net [204.157.148.61]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id GAA18799 for ; Wed, 21 Jun 1995 06:00:01 -0700 Received: from jake.lodgenet.com (jake.lodgenet.com [204.124.120.30]) by tserv.lodgenet.com (8.6.12/8.6.12) with ESMTP id IAA30530 for ; Wed, 21 Jun 1995 08:00:12 -0500 Received: from localhost (localhost [127.0.0.1]) by jake.lodgenet.com (8.6.11/8.6.9) with SMTP id HAA08137; Wed, 21 Jun 1995 07:59:50 -0500 Message-Id: <199506211259.HAA08137@jake.lodgenet.com> X-Authentication-Warning: jake.lodgenet.com: Host localhost didn't use HELO protocol X-Mailer: exmh version 1.6 4/21/95 To: Michael Smith cc: questions@freebsd.org Subject: Re: Socks proxy under 2.0? In-reply-to: Your message of "Wed, 21 Jun 1995 15:45:23 +0930." <199506210615.PAA24516@genesis.atrad.adelaide.edu.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 21 Jun 1995 07:59:47 -0500 From: "Eric L. Hernes" Sender: questions-owner@freebsd.org Precedence: bulk > Hiho, just want a quick chat with anyone that has the socks proxy > daemon running under FreeBSD 2.0R. I had a quick squizz through the > ports collection without seeing it, so I thought I'd ask 8) > Yea, It works pretty good. I have socksified sup, ncftp (1.x), plus all of the standard socks stuff (telnet, ftp, ...). I think I just followed the Makefile definitions for FreeBSD 1.x and did a make (or maybe a gmake). There was some configuration stuff to set up, but the docs that come with socks were good enough to get that going. > -- > ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ > ]] Genesis Software genesis@atrad.adelaide.edu.au [[ > ]] High-speed data acquisition and [[ > ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ > ]] My car has "demand start" - Terry Lambert [[ > -- erich@lodgenet.com erich@rrnet.com From owner-freebsd-questions Wed Jun 21 06:23:20 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA20174 for questions-outgoing; Wed, 21 Jun 1995 06:23:20 -0700 Received: from nrnsinc.on.ca (0@rads.dnd.ca [131.136.194.2]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id GAA20166 for ; Wed, 21 Jun 1995 06:23:17 -0700 Message-Id: <199506211323.GAA20166@freefall.cdrom.com> Received: from nrnsinc.on.ca by nrnsinc.on.ca id <19029-0@nrnsinc.on.ca>; Wed, 21 Jun 1995 09:23:02 -0400 Subject: Re: Ports of FreeBSD To: terry@cs.weber.edu (Terry Lambert) Date: Wed, 21 Jun 1995 09:22:56 -0400 (EDT) Cc: questions@FreeBSD.org In-Reply-To: <9505101815.AA26114@cs.weber.edu> from "Terry Lambert" at May 10, 95 12:15:03 pm Reply-to: robinson@nrnsinc.on.ca Organization: DREnet Network Coordination Centre, 1-613-599-7860, 1-613-990-9302 X-Mailer: ELM [version 2.4 PL21] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 2013 From: Ken Robinson Sender: questions-owner@FreeBSD.org Precedence: bulk Hello Terry, > > If you can get the hardware documentation for the PowerPC machines > out of Apple, or you can convince IBM to open their *warehouses* full > of PCI based PC class PPC machines that they haven't got WARP running on > to their satisfaction (and pry hardware docs out of them), or if you can > find a third party that builds a board such that the total system is in > the $2000-$3000 range (like the IBM and Apple systems) and get docs > from them... then I will buy a machine the same business day that I > get the documentation, I will pay FedEx charges to get it to me as > fast as possible on top of the default charges, and I will start work > the day the machine arrives. I've had copies of the PReP standard > since the 2nd day after it was available up to the point where Apple > decided they could make more money in a closed hardware market and > threw PReP out the window in favor of CHRP (which is about as useful > as a documented hardware standard as POSIX is as an ABI). > Now that IBM has released their systems, with the entry model at <$3000, what are your thoughts? Do you intend to pick one of these up and start porting? I'd like to get my hands on one of these machines, and help with testing, etc. I've done some C programming, and unix programming, but I'm not a pro. Porting a kernel would be over my head. My other problem if that I have to dig up the money for one of these systems. Up here in Canada, you are looking at over $4000 CDN for one, and I don't have that right now. Perhaps if I do enough OverTime, by the end of summer I'd be able to purchase one. Hmm. I could also sell off some of my current hardware... Anyway, just looking for your thoughts, and letting you know that once I can get the money together, you'd have some support from here. -- Ken Robinson DREnet Network Coordination Centre (NCC) NRNS Incorporated Phone: 613.599.7860 Fax: 613.599.7739 135 Michael Cowpland Dr., Suite 302 Kanata, Ontario K2M-2E9 From owner-freebsd-questions Wed Jun 21 06:31:29 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA20663 for questions-outgoing; Wed, 21 Jun 1995 06:31:29 -0700 Received: from relay.philips.nl (relay.philips.nl [130.144.65.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id GAB20656 for ; Wed, 21 Jun 1995 06:31:26 -0700 Received: from knox.pcec.philips.com ([130.140.74.243]) by relay.philips.nl (8.6.9/8.6.9-950414) with SMTP id PAA02980 for ; Wed, 21 Jun 1995 15:30:52 +0200 Received: from eis16.philips.com by knox.pcec.philips.com (4.1/SMI-4.1) id AA17246; Wed, 21 Jun 95 09:30:40 EDT Received: by eis16.philips.com (5.x/SMI-SVR4) id AA17439; Wed, 21 Jun 1995 09:30:39 -0400 Date: Wed, 21 Jun 1995 09:30:39 -0400 From: wolperte@knox.pcec.philips.com (ED WOLPERT ) Message-Id: <9506211330.AA17439@eis16.philips.com> To: questions@freebsd.org Subject: ppp in auto mode question Sender: questions-owner@freebsd.org Precedence: bulk Folks- I got 2.0.5R, (recent upgrade from 2.0R-cdrom) and love the ppp program. One thing I don't understand... and want to know if anyone has seen the same thing as me... If a user (not root) logs in, before ppp (that started at boot time, from the rc.local as 'ppp -auto connect') ever made a connection, it does not try to make a connection, and only will if the user tries to connect (ping, finger) the main router that the ppp program knows about. If the ppp program had made and, after a timeout period, dropped the connection... the next time a shell is started by a user, it automatically will try to connect to the host... even though no network connection is being attempted by the user. Has anyone seen this? It does not occur for root, and the .cshrc files are the same as the one created from the adduser command, except the SHELL is changed to tcsh (from csh). Ideas? -- Virtually, Edward Wolpert ------------------------------- "The best way out is always wolperte@knox.pcec.philips.com | through." - Robert Frost wolpert@utk.edu | =============================== 'Give me a shell, and I'll Truth is what you believe. | give you the world.' (tm) ------------------------------- Fnord. From owner-freebsd-questions Wed Jun 21 06:44:54 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA21882 for questions-outgoing; Wed, 21 Jun 1995 06:44:54 -0700 Received: from btr0x1.hrz.uni-bayreuth.de (btr0x1.hrz.uni-bayreuth.de [132.180.8.29]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id GAA21852 for ; Wed, 21 Jun 1995 06:44:39 -0700 Received: from btp1x5 (btp1x5.phy.uni-bayreuth.de) by btr0x1.hrz.uni-bayreuth.de (4.1/btr0x1 (UBTGW/btr0x1-2.4.7)) id AA10331; Wed, 21 Jun 95 15:44:32 +0200 Received: by btp1x5; (5.65/1.1.8.2/13Mar95-1216PM) id AA10641; Wed, 21 Jun 1995 15:47:50 +0100 From: griessl Message-Id: <9506211447.AA10641@btp1x5> Subject: fatal signal 11 To: questions@FreeBSD.org Date: Wed, 21 Jun 1995 15:47:50 +0100 (WET DST) X-Mailer: ELM [version 2.4 PL24] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 260 Sender: questions-owner@FreeBSD.org Precedence: bulk Hi, I have in FreeBSD-2.0.5-ALPHA from time to time this compiler error: "cc: Internal compiler error: program cc1 got fatal signal 11" After a reboot the same source compiles without any errors or warnings ! Is there anybody, who know the reason ? Werner From owner-freebsd-questions Wed Jun 21 07:32:34 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA25614 for questions-outgoing; Wed, 21 Jun 1995 07:32:34 -0700 Received: from hda.com (hda.com [199.232.40.182]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id HAA25604 for ; Wed, 21 Jun 1995 07:32:30 -0700 Received: (dufault@localhost) by hda.com (8.6.11/8.3) id KAA28488; Wed, 21 Jun 1995 10:27:46 -0400 From: Peter Dufault Message-Id: <199506211427.KAA28488@hda.com> Subject: Re: fatal signal 11 To: werner@btp1x5.phy.uni-bayreuth.de (griessl) Date: Wed, 21 Jun 1995 10:27:46 -0400 (EDT) Cc: questions@FreeBSD.org In-Reply-To: <9506211447.AA10641@btp1x5> from "griessl" at Jun 21, 95 03:47:50 pm X-Mailer: ELM [version 2.4 PL24] Content-Type: text Content-Length: 551 Sender: questions-owner@FreeBSD.org Precedence: bulk griessl writes: > > > Hi, > > I have in FreeBSD-2.0.5-ALPHA from time to time this compiler error: > "cc: Internal compiler error: program cc1 got fatal signal 11" > After a reboot the same source compiles without any errors or warnings ! > > Is there anybody, who know the reason ? What are the details of the system? If you don't reboot is the problem reproducible? Peter -- Peter Dufault Real Time Machine Control and Simulation HD Associates, Inc. Voice: 508 433 6936 dufault@hda.com Fax: 508 433 5267 From owner-freebsd-questions Wed Jun 21 08:54:06 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA00838 for questions-outgoing; Wed, 21 Jun 1995 08:54:06 -0700 Received: from devnull (devnull.mpd.tandem.com [131.124.4.29]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id IAA00832 for ; Wed, 21 Jun 1995 08:54:04 -0700 Received: from olympus by devnull (8.6.8/8.6.6) id KAA25201; Wed, 21 Jun 1995 10:53:50 -0500 Received: by olympus (4.1/TSS2.1) id AA15287; Wed, 21 Jun 95 10:53:36 CDT From: faulkner@mpd.tandem.com (Boyd Faulkner) Message-Id: <9506211553.AA15287@olympus> Subject: Re: Socks proxy under 2.0? To: msmith@atrad.adelaide.edu.au (Michael Smith) Date: Wed, 21 Jun 1995 10:53:35 -0500 (CDT) Cc: questions@freebsd.org In-Reply-To: <199506210615.PAA24516@genesis.atrad.adelaide.edu.au> from "Michael Smith" at Jun 21, 95 03:45:23 pm X-Mailer: ELM [version 2.4 PL17] Content-Type: text Content-Length: 961 Sender: questions-owner@freebsd.org Precedence: bulk > > Hiho, just want a quick chat with anyone that has the socks proxy > daemon running under FreeBSD 2.0R. I had a quick squizz through the > ports collection without seeing it, so I thought I'd ask 8) > > -- > ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ > ]] Genesis Software genesis@atrad.adelaide.edu.au [[ > ]] High-speed data acquisition and [[ > ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ > ]] My car has "demand start" - Terry Lambert [[ > I have the clients. Socks is available at ftp.nec.com, in the directory /pub/security/socks.cstc. It isn't difficult to compile. Boyd -- _______________________________________________________________________ Boyd Faulkner faulkner@isd.tandem.com _______________________________________________________________________ From owner-freebsd-questions Wed Jun 21 08:57:54 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA01159 for questions-outgoing; Wed, 21 Jun 1995 08:57:54 -0700 Received: from btr0x1.hrz.uni-bayreuth.de (btr0x1.hrz.uni-bayreuth.de [132.180.8.29]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id IAA01149 for ; Wed, 21 Jun 1995 08:57:49 -0700 Received: from btp1x5 (btp1x5.phy.uni-bayreuth.de) by btr0x1.hrz.uni-bayreuth.de (4.1/btr0x1 (UBTGW/btr0x1-2.4.7)) id AA14501; Wed, 21 Jun 95 17:57:42 +0200 Received: by btp1x5; (5.65/1.1.8.2/13Mar95-1216PM) id AA13872; Wed, 21 Jun 1995 18:01:01 +0100 From: griessl Message-Id: <9506211701.AA13872@btp1x5> Subject: Re: fatal signal 11 To: dufault@hda.com (Peter Dufault) Date: Wed, 21 Jun 1995 18:01:01 +0100 (WET DST) Cc: questions@freebsd.org In-Reply-To: <199506211427.KAA28488@hda.com> from "Peter Dufault" at Jun 21, 95 10:27:46 am X-Mailer: ELM [version 2.4 PL24] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1938 Sender: questions-owner@freebsd.org Precedence: bulk > > griessl writes: > > > > > > Hi, > > > > I have in FreeBSD-2.0.5-ALPHA from time to time this compiler error: > > "cc: Internal compiler error: program cc1 got fatal signal 11" > > After a reboot the same source compiles without any errors or warnings ! > > > > Is there anybody, who know the reason ? > > What are the details of the system? noname AMD486DX/2-66 isa, 20Mb-Ram Conner CFS420A-ide-disk (100Mb DOS, 300Mb FreeBSD (156 Mb-Swap !)), WD1013-Ethernet-Card (16-bit) FreeBSD-2.0.5-ALPHA, XFree86 kernel BTP1DA compiled with: options "MAXDSIZ=256UL*1024*1024" /usr/local nfsmounted on a DEC-3000/600(alpha) with osf1-3.0 local daemons: httpd systemname: "btp1da.phy.uni-bayreuth.de" (132.180.20.32) dmesg-output: FreeBSD 2.0.5-ALPHA #0: Tue Jun 13 11:31:11 MET DST 1995 croot@btp1da:/usr/src/sys/compile/BTP1DA CPU: i486DX (486-class CPU) real memory = 20578304 (5024 pages) avail memory = 18882560 (4610 pages) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <8 virtual consoles, flags=0x0> ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa ed0: address 00:00:c0:ac:a3:61, type WD8013EPC (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 765 fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 406MB (832608 sectors), 826 cyls, 16 heads, 63 S/T, 512 B/S npx0 on motherboard npx0: INT 16 interface pid 3011: cc1: uid 4050: exited on signal 11 > > If you don't reboot is the problem reproducible? YES ! > > Peter > > -- > Peter Dufault Real Time Machine Control and Simulation > HD Associates, Inc. Voice: 508 433 6936 > dufault@hda.com Fax: 508 433 5267 > From owner-freebsd-questions Wed Jun 21 09:09:12 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA02123 for questions-outgoing; Wed, 21 Jun 1995 09:09:12 -0700 Received: from croute.com (ishm2.croute.com [199.97.106.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id JAA02111 for ; Wed, 21 Jun 1995 09:09:08 -0700 Received: from bldg1.croute.com by croute.com (4.1/SMI-4.1) id AA12430; Wed, 21 Jun 95 11:05:47 CDT Received: from COMPUROUTE/SpoolDir by bldg1.croute.com (Mercury 1.13); Wed, 21 Jun 95 11:36:16 +600 Received: from SpoolDir by COMPUROUTE (Mercury 1.13); Wed, 21 Jun 95 11:36:08 +600 From: "Larry Dolinar" Organization: CompuRoute, Inc. To: steve@gordian.com (Steve Khoo) Date: Wed, 21 Jun 1995 11:36:06 +600 CDT Subject: Re: router card Cc: freebsd-questions@freebsd.org Priority: normal X-Mailer: Pegasus Mail v3.22 Message-Id: <793FDC2183D@bldg1.croute.com> Sender: questions-owner@freebsd.org Precedence: bulk | | How about a 128kbps ISDN card for ~$400 or maybe less? Where'd you find it at this price? The best I've seen was still MSRP: $595. | | DigiBoard DataFire ISDN LAN Adapter. It's an ISA-bus board. It has a | built in NT1 and provide ISDN U interface to connect directly to your | ISDN phone line. | Thanks, larry From owner-freebsd-questions Wed Jun 21 09:27:06 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA03351 for questions-outgoing; Wed, 21 Jun 1995 09:27:06 -0700 Received: from csc.com (explorer.csc.com [20.1.10.27]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id JAA03342 for ; Wed, 21 Jun 1995 09:27:04 -0700 Received: by csc.com (Smail3.1.29.1 #1) id m0sOSbl-000iEsC; Wed, 21 Jun 95 12:26 EDT Date: Wed, 21 Jun 1995 12:26:28 -0400 (EDT) From: Stefan Vanrafelghem To: freebsd-questions@FreeBSD.ORG cc: kevin@elwood Subject: 486DX2 FreeBSD boot.flp problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.ORG Precedence: bulk This is my second posting concerning this problem. Thanks to those of you who responded to my first message, and got me a little farther along in trouble-shooting this. Unfortunately, I still cannot get my PC to boot up from the boot.flp floppy. I gave the floppy to a friend, to try on his PC, and it worked fine! So I guess it's not the floppy. "WHAT'S WRONG WITH MY PC?!?!" I started taking the PC apart last night just to get more familiar with it, so I thought I'd post some of the information about it here, in case anyone sees any obvious problems. It's a 486DX2 with 16 meg of RAM BIOS is AMI-BIOS (dated 6/6/92) AMI=American Megatrends Inc. It has a Future Domain SCSI controller, which seems to be controlling: one floppy drive two hard drives (1 Conner 1.4G and 1 Maxtor 240Meg) one double speed CD-ROM. It also has a "Stealth 32" video card. I don't know who manufactured the mother-board, but several of the chips have "OPTi" labelled on them... (please excuse my ignorance.) If anyone knows of any problems with any of these devices please let me know. Thanks, Stefan J. Van Rafelghem svanrafe@csc.com From owner-freebsd-questions Wed Jun 21 10:23:40 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA07194 for questions-outgoing; Wed, 21 Jun 1995 10:23:40 -0700 Received: from cs.weber.edu (cs.weber.edu [137.190.16.16]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id KAA07188 for ; Wed, 21 Jun 1995 10:23:39 -0700 Received: by cs.weber.edu (4.1/SMI-4.1.1) id AA29538; Wed, 21 Jun 95 11:16:39 MDT From: terry@cs.weber.edu (Terry Lambert) Message-Id: <9506211716.AA29538@cs.weber.edu> Subject: Re: Ports of FreeBSD To: robinson@nrnsinc.on.ca Date: Wed, 21 Jun 95 11:16:38 MDT Cc: questions@FreeBSD.org In-Reply-To: <9506211316.AA28955@cs.weber.edu> from "Ken Robinson" at Jun 21, 95 09:22:56 am X-Mailer: ELM [version 2.4dev PL52] Sender: questions-owner@FreeBSD.org Precedence: bulk > > Hello Terry, > Replied to off-list. Terry Lambert terry@cs.weber.edu --- Any opinions in this posting are my own and not those of my present or previous employers. From owner-freebsd-questions Wed Jun 21 11:49:42 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id LAA11073 for questions-outgoing; Wed, 21 Jun 1995 11:49:42 -0700 Received: from bison.bw.lgca.ohio.gov (bison.bw.lgca.ohio.gov [156.63.242.190]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id LAA11067 for ; Wed, 21 Jun 1995 11:49:39 -0700 Received: (from root@localhost) by bison.bw.lgca.ohio.gov (8.6.9/8.6.9) id OAA02677; Wed, 21 Jun 1995 14:50:11 GMT Date: Wed, 21 Jun 1995 14:50:11 +0000 () From: Steven Falcon To: questions@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk I'm running 2.0r right now, and have gotten to the stage of backups... the system does not see the rmt0 or any such device. After finally figuring out that that its really on st0, I dump'd to it, and everything SEEMED to be ok. Now I want to mount the tape... can it be done? Also, the mt utility does not want to do anything to the drive. Its a WangDAT Model 3100, and it *DID* wor once :) Can someone direct me to how to get backups to work correctly? Thanks -- Ravi Pina * falcon@mail.bw.lgca.ohio.gov * falcon@bison.bw.lgca.ohio.gov Finger for PGP Public key... remember, you can never be too sure... "somewhere in the heavens...they are watching" All spelling errors are intentional, and meant to annoy spelling pedants. From owner-freebsd-questions Wed Jun 21 11:57:29 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id LAA11370 for questions-outgoing; Wed, 21 Jun 1995 11:57:29 -0700 Received: from eunet.fi (pim.eunet.fi [193.66.4.30]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id LAA11364 for ; Wed, 21 Jun 1995 11:57:27 -0700 Received: by eunet.fi id AA10650 (5.67a/IDA-1.5 for ); Wed, 21 Jun 1995 21:57:06 +0300 Received: by pim.eunet.fi id AA010648 from gate.fidata.fi(193.64.102.1); Wed Jun 21 21:56:55 1995 Received: from mips.fidata.fi by gate.fidata.fi with SMTP (5.65c/1.50PH) id AA08915; Wed, 21 Jun 1995 21:56:53 +0300 Received: (from tomppa@localhost) by mips.fidata.fi (8.6.10/8.6.10) id VAA25873; Wed, 21 Jun 1995 21:56:52 +0300 Date: Wed, 21 Jun 1995 21:56:52 +0300 From: Tomi Vainio Message-Id: <199506211856.VAA25873@mips.fidata.fi> To: freebsd-questions@freebsd.org Subject: WD7000 and 2.0.5R install Reply-To: tomppa@fidata.fi Sender: questions-owner@freebsd.org Precedence: bulk WD7000FASST (wds) driver is not included on 2.0.5R install disk. How do I make new install disk with this driver? Tomppa From owner-freebsd-questions Wed Jun 21 12:18:15 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA11919 for questions-outgoing; Wed, 21 Jun 1995 12:18:15 -0700 Received: from tellab5.lisle.tellabs.com (tellab5.lisle.tellabs.com [138.111.243.28]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id MAA11913 ; Wed, 21 Jun 1995 12:18:12 -0700 Received: from genesis by tellab5.lisle.tellabs.com with smtp (Smail3.1.29.1 #4) id m0sOV1X-000jCyC; Wed, 21 Jun 95 14:01 CDT Message-Id: From: mikebo@tellabs.com (Mike Borowiec) Subject: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives To: questions@freebsd.org Date: Wed, 21 Jun 1995 14:01:12 -0500 (CDT) Cc: mikebo@tellabs.com (Mike Borowiec), gibbs@freebsd.org X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 3058 Sender: questions-owner@freebsd.org Precedence: bulk Greetings - I sent e-mail on this problem to Justin, the author of the AIC7xxx driver. He suggested I post my problems to this list: I've been running an Adaptec 1542B controller under FBSD 2.0 in a 486/50 EISA/VESA system for some time. I've never had a problem with my Archive Viper QIC150 and Exabyte 8200 tape drives before. Last week, I got an Adaptec 2742AT EISA dual-channel SCSI card, and have been unable to use either tape drive since. Thinking that the new and improved 274x driver code in v2.0.5R might solve the problem, I tried installing the new OS. The QIC150 tape install failed with the same error I get under 2.0R whenever I try to access the Archive Viper QIC150 drive. DEBUG: Notify: Attempting to extract from SCSI tape drive... DEBUG: Executing command 'cpio -iBduVm -H tar -I /dev/rst0' (Magic 0) st0(ahc1:2:0): ILLEGAL REQUEST st0: Cannot set selected mode st0: bad request, must be between 0 and 0 cpio: read error: Input/output error DEBUG: Command 'cpio -iBduVm -H tar -I /dev/rst0' returns status of 1 Another problem I'm having (under 2.0R) since installing the AHA2742AT card: Whenever I try to access the Exabyte 8200 8mm drive (even to do a "mt -f /dev/st1 rewind") I get a timeout message on the root disk drive, the drive select light stays lit and the entire system hangs. ahc0: target 0, lun 0 (sd0) timed out Abort unsupported! ahc0: target 0, lun 0 (sd0) timed out Abort unsupported! The root drive in this case is an Imprimis 94601-15 (aka. Seagate Wren-VII model ST41200N). This also worked fine on the AHA1542B, and began happening immediately after I installed the AHA2742AT. Can anyone answer: o Are there known problems with the SCSI or ST drivers and/or Archive Viper and/or Exabyte drives? Justin cannot confirm the Viper problem as he doesn't own one of these drives. Recent posts to comp.unix.bsd.freebsd.misc indicate I'm not the only one having the "st0: bad request, must be between 0 and 0" problem. o According to the 2.0.5R release notes, the AIC7xxx driver code is much better than 2.0R, so is the problem in the SCSI or ST driver, or is it the fault of my tape or disk drives? o Is there a workaround so I can get 2.0.5 running? o I can't tell if Exabyte access will hang the OS under 2.0.5R since I can't get it installed... but this is a major problem under 2.0R. Does anyone know what the "Abort unsupported" message means and how I can work around it? Both the Viper and Exabyte drives worked flawlessly with the 1542B, so I'm sorely tempted to go back to the ISA controller even tho I'm running an EISA system board. ACK!!! Any help or comments are much appreciated... - Mike -- -------------------------------------------------------------------------- Michael Borowiec Network Operations Tellabs Operations, Inc. mikebo@TELLABS.COM 1000 Remington Blvd. MS109 708-378-6007 FAX: 708-378-6714 Bolingbrook, IL, USA 60440 -------------------------------------------------------------------------- From owner-freebsd-questions Wed Jun 21 12:29:23 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA12548 for questions-outgoing; Wed, 21 Jun 1995 12:29:23 -0700 Received: from easynet.com (easy1.easynet.com [199.2.26.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id MAA12542 for ; Wed, 21 Jun 1995 12:29:22 -0700 Received: by easynet.com (Smail3.1.28.1 #7) id m0sOVR5-000reEC; Wed, 21 Jun 95 12:27 WET DST Message-Id: From: brian@MediaCity.com (Brian Litzinger) Subject: Re: fatal signal 11 To: werner@btp1x5.phy.uni-bayreuth.de (griessl) Date: Wed, 21 Jun 1995 12:27:39 -0700 (PDT) Cc: dufault@hda.com, questions@freebsd.org In-Reply-To: <9506211701.AA13872@btp1x5> from "griessl" at Jun 21, 95 06:01:01 pm X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 3521 Sender: questions-owner@freebsd.org Precedence: bulk > > > > griessl writes: > > > I have in FreeBSD-2.0.5-ALPHA from time to time this compiler error: > > > "cc: Internal compiler error: program cc1 got fatal signal 11" > > > After a reboot the same source compiles without any errors or warnings ! > > > > > > Is there anybody, who know the reason ? > > > > What are the details of the system? I have a similar experience with two systems. When building kernels I sometimes get the signal 11 on the compiler. I just type make again at all goes well. Brian Litzinger brian@easynet.com One system is Pentium P5-90/512K Cache/16MB Adaptec 2940W Matrox PCI VGA FreeBSD 2.0-BUILT-19950601 The other is: Intel 486DX4/100, 256K Cache/16MB IDE Standard VGA FreeBSD 2.0.5R CPU: 90-MHz Pentium 735\\90 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x521 Stepping=1 Features=0x1bf real memory = 16384000 (4000 pages) avail memory = 14737408 (3598 pages) sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface Probing for devices on the pci0 bus: configuration mode 1 allows 32 devices. pci0:16: OPTI, device=0xc822, class=bridge [not supported] ahc0 rev 0 int a irq 9 on pci0:17 ahc0: reading board settings ahc0: 294x Wide Channel, SCSI Id=7, aic7870, 16 SCBs ahc0: Downloading Sequencer Program...Done ahc0: Probing channel A ahc0 waiting for scsi devices to settle ahc0: target 0 synchronous at 10.0MB/s, offset = 0xf (ahc0:0:0): "DEC RZ73 (C) DEC T392" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 1908MB (3907911 512 byte sectors) (ahc0:2:0): "TEAC CD-ROM CD-50 1.06" type 5 removable SCSI 2 cd0(ahc0:2:0): CD-ROM cd0(ahc0:2:0): UNIT ATTENTION asc:28,0 cd0(ahc0:2:0): Not ready to ready transition, medium may have changed cd present.[400000 x 2048 byte records] (ahc0:4:0): "WANGTEK 6130-FS 3.04" type 1 removable SCSI 2 st0(ahc0:4:0): Sequential-Access density code 0x13, drive empty de0 rev 35 int a irq 9 on pci0:18 reg20: virtual=0xf2e98c00 physical=0xffbfec00 size=0x80 de0: DC21040 [10Mb/s] pass 2.3 Ethernet address 00:80:c8:2b:db:08 de0: enabling Thinwire/AUI port using shared irq 9. vga0 rev 2 int a irq 9 on pci0:19 pci0: uses 4198528 bytes of memory from a0000000 upto ffbfffff. pci0: uses 384 bytes of I/O space from fe80 upto ffff. CPU: i486 DX4 (486-class CPU) Origin = "GenuineIntel" Id = 0x480 Stepping=0 Features=0x3 real memory = 16384000 (4000 pages) avail memory = 14716928 (3593 pages) sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed1 at 0x320-0x33f irq 5 on isa ed1: address 00:40:05:16:aa:09, type NE2000 (16 bit) eth0 at 0x2e0 irq 10 maddr 0xd0000 on isa sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 765 fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S npx0 on motherboard npx0: INT 16 interface From owner-freebsd-questions Wed Jun 21 12:31:09 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA12697 for questions-outgoing; Wed, 21 Jun 1995 12:31:09 -0700 Received: from easynet.com (easy1.easynet.com [199.2.26.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id MAA12691 for ; Wed, 21 Jun 1995 12:31:08 -0700 Received: by easynet.com (Smail3.1.28.1 #7) id m0sOVSf-000reMC; Wed, 21 Jun 95 12:29 WET DST Message-Id: From: brian@MediaCity.com (Brian Litzinger) Subject: Re: router card To: LARRYD@bldg1.croute.com (Larry Dolinar) Date: Wed, 21 Jun 1995 12:29:17 -0700 (PDT) Cc: steve@gordian.com, freebsd-questions@freebsd.org In-Reply-To: <793FDC2183D@bldg1.croute.com> from "Larry Dolinar" at Jun 21, 95 11:36:06 am X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 325 Sender: questions-owner@freebsd.org Precedence: bulk > | > | How about a 128kbps ISDN card for ~$400 or maybe less? > Where'd you find it at this price? The best I've seen was still MSRP: $595. USR is about to introduce an V.34/ISDN modem for $399, though I don't know the details. And the price may be different when it is announced. Brian Litzinger brian@easynet.com From owner-freebsd-questions Wed Jun 21 12:38:41 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA13016 for questions-outgoing; Wed, 21 Jun 1995 12:38:41 -0700 Received: from marmite.Stanford.EDU (2842@marmite.Stanford.EDU [36.159.0.58]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id MAA13006 for ; Wed, 21 Jun 1995 12:38:40 -0700 Received: (hlew@localhost) by marmite.Stanford.EDU (8.6.10/8.6.4) id MAA05022; Wed, 21 Jun 1995 12:38:21 -0700 Date: Wed, 21 Jun 1995 12:38:20 -0700 (PDT) From: Howard Lew To: John-Mark Gurney cc: questions@FreeBSD.org Subject: Re: 3 Hard Drives via EIDE Accel. Card In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk On Tue, 20 Jun 1995, John-Mark Gurney wrote: > > > > > I was wondering if anyone has had success with using 3 IDE hard drives under > > FreeBSD with a 2HD/2FD controller and one of those EIDE Accelerator > > cards that support the third. > > > > Or can I use 2 regular IDE cards? And I have also heard about 4HD/4FD > > controllers... How well do they work with FreeBSD? > > > > Any info is appreciated. > > it works very well... right now I am using a vlb card that has dual IDE > channels... I used to have four IDE hard drives running on it... but now > I have two IDE drives, one on each channel... you can use another ide > controller you just need to make sure that it does change the irq to > something other than 14... I have some winbond controlers that allow you > to set the ide channel to a second channel but I have not gotten those to > work... TTYL... > Can you tell me the brand of the vlb card that you are using? I wanted to use my current no name brand vlb card (I think it has a Goldstar chip though) for 2 eide drives and an ISA IDE card for just an old non-EIDE/non-ATA drive all on the same computer. Will this combination work? Is wd0 supposed to be irq 14 and wd1 irq 15? From owner-freebsd-questions Wed Jun 21 12:52:41 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA13481 for questions-outgoing; Wed, 21 Jun 1995 12:52:41 -0700 Received: from bluesky.net (dns.bluesky.net [204.97.240.2]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id MAA13473 for ; Wed, 21 Jun 1995 12:52:40 -0700 Received: (from jvb@localhost) by bluesky.net (8.6.12/8.6.12) id PAA00721 for FreeBSD-questions@freefall.cdrom.com; Wed, 21 Jun 1995 15:50:49 -0400 Received: (from jvb@localhost) by bluesky.net (8.6.12/8.6.12) id PAA00721 for FreeBSD-questions@freefall.cdrom.com; Wed, 21 Jun 1995 15:50:49 -0400 Date: Wed, 21 Jun 1995 15:50:49 -0400 From: Swarthy Message-Id: <199506211950.PAA00721@bluesky.net> To: FreeBSD-questions@freefall.cdrom.com Subject: vers? Sender: questions-owner@FreeBSD.org Precedence: bulk is FreeBSD Epsilon the newest version available? How well will it run X? From owner-freebsd-questions Wed Jun 21 13:06:31 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA13821 for questions-outgoing; Wed, 21 Jun 1995 13:06:31 -0700 Received: from iworks.InterWorks.org (iworks.interworks.org [128.255.18.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id NAA13815 ; Wed, 21 Jun 1995 13:06:26 -0700 Received: by iworks.InterWorks.org (1.37.109.8/16.2) id AA13314; Wed, 21 Jun 1995 15:00:56 -0500 Message-Id: <9506212000.AA13314@iworks.InterWorks.org> Date: Wed, 21 Jun 1995 15:00:56 -0500 From: "Daniel M. Eischen" To: gibbs@freebsd.org, mikebo@TELLABS.COM, questions@freebsd.org Subject: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives Sender: questions-owner@freebsd.org Precedence: bulk >Greetings - >I sent e-mail on this problem to Justin, the author of the AIC7xxx >driver. He suggested I post my problems to this list: > >I've been running an Adaptec 1542B controller under FBSD 2.0 in a 486/50 >EISA/VESA system for some time. I've never had a problem with my Archive >Viper QIC150 and Exabyte 8200 tape drives before. Last week, I got an >Adaptec 2742AT EISA dual-channel SCSI card, and have been unable to use >either tape drive since. > >Thinking that the new and improved 274x driver code in v2.0.5R might >solve the problem, I tried installing the new OS. The QIC150 tape install >failed with the same error I get under 2.0R whenever I try to access the >Archive Viper QIC150 drive. > >DEBUG: Notify: Attempting to extract from SCSI tape drive... >DEBUG: Executing command 'cpio -iBduVm -H tar -I /dev/rst0' (Magic 0) >st0(ahc1:2:0): ILLEGAL REQUEST >st0: Cannot set selected mode >st0: bad request, must be between 0 and 0 >cpio: read error: Input/output error >DEBUG: Command 'cpio -iBduVm -H tar -I /dev/rst0' returns status of 1 How was the Q150 tape made and what block size did you use? The tape install failed for me on a HP 1533C DAT tape drive when I made the tape with the default block size (for tar) of 20*512 bytes. When I remade the tape with a blocking factor of 1, it worked. I got an illegal block size message on the failed attempt, so that's probably not your problem - I'm just throwing it out there. > >Another problem I'm having (under 2.0R) since installing the AHA2742AT >card: Whenever I try to access the Exabyte 8200 8mm drive (even to do >a "mt -f /dev/st1 rewind") I get a timeout message on the root disk >drive, the drive select light stays lit and the entire system hangs. > >ahc0: target 0, lun 0 (sd0) timed out Abort unsupported! >ahc0: target 0, lun 0 (sd0) timed out Abort unsupported! > >The root drive in this case is an Imprimis 94601-15 (aka. Seagate >Wren-VII model ST41200N). This also worked fine on the AHA1542B, >and began happening immediately after I installed the AHA2742AT. > >Can anyone answer: >o Are there known problems with the SCSI or ST drivers and/or Archive > Viper and/or Exabyte drives? Justin cannot confirm the Viper problem > as he doesn't own one of these drives. Recent posts to > comp.unix.bsd.freebsd.misc indicate I'm not the only one having the > "st0: bad request, must be between 0 and 0" problem. At work we have an Archive 250ST (which is still slow as a dog), and I installed FreeBSD (the Feb or March snapshot) on an EISA bus 486 with a 2742T (Rev C) using the Archive. But, I installed by hand from tape. I didn't use the boot/cpio install. I got through the cpio installation, then escaped and installed manually. I don't remember, but I think the FreeBSD didn't support SCSI tape install then. We are planning on upgrading that system to 2.0.5 as soon as a new disk drive arrives (in a week or two), so I could try the tape install from the Archive. >o According to the 2.0.5R release notes, the AIC7xxx driver code is > much better than 2.0R, so is the problem in the SCSI or ST driver, > or is it the fault of my tape or disk drives? Like I mentioned above, there does seem to be a bug with the installation from SCSI tape for default tar block sizes of 20x512. It's not a SCSI tape driver bug, because I have no problem performing tar's to/from tape drive outside of the installation program/script. >o Is there a workaround so I can get 2.0.5 running? Try installing a minimum installation from floppies. Then install by hand from tape. >o I can't tell if Exabyte access will hang the OS under 2.0.5R since > I can't get it installed... but this is a major problem under 2.0R. > Does anyone know what the "Abort unsupported" message means and how > I can work around it? > >Both the Viper and Exabyte drives worked flawlessly with the 1542B, so >I'm sorely tempted to go back to the ISA controller even tho I'm running >an EISA system board. ACK!!! > >Any help or comments are much appreciated... >- Mike >-- >-------------------------------------------------------------------------- >Michael Borowiec Network Operations Tellabs Operations, Inc. >mikebo@TELLABS.COM 1000 Remington Blvd. MS109 >708-378-6007 FAX: 708-378-6714 Bolingbrook, IL, USA 60440 >-------------------------------------------------------------------------- Dan Eischen deischen@iworks.InterWorks.org From owner-freebsd-questions Wed Jun 21 14:11:18 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA02304 for questions-outgoing; Wed, 21 Jun 1995 14:11:18 -0700 Received: from halon.sybase.com (halon.sybase.com [192.138.151.33]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id OAA02298 for ; Wed, 21 Jun 1995 14:11:17 -0700 Received: from sybase.com (sybgate.sybase.com) by halon.sybase.com (5.x/SMI-SVR4/SybFW4.0) id AA27219; Wed, 21 Jun 1995 14:07:42 -0700 Received: from red_oak.sybgate.sybase.com by sybase.com (4.1/SMI-4.1/SybH3.4) id AA28221; Wed, 21 Jun 95 14:11:16 PDT Received: by red_oak.sybgate.sybase.com (4.1/SMI-4.1/SybEC3.2) id AA19745; Wed, 21 Jun 95 17:11:13 EDT Date: Wed, 21 Jun 95 17:11:13 EDT From: jeffa@sybase.com (Jeff Anuszczyk) Message-Id: <9506212111.AA19745@red_oak.sybgate.sybase.com> To: questions@freebsd.org Subject: Questions about creating a tape install for FreeBSD V2.0.5 using INSTALL guide Sender: questions-owner@freebsd.org Precedence: bulk I'm reposting this since I never got a copy of it via majordomo so I suspect it never made it to the list (I verified that I am on the questions mailing list). Any help would be very much appreciated. - Jeff ----- Begin Included Message ----- >From jeffa Tue Jun 20 12:25:48 1995 Date: Tue, 20 Jun 95 12:25:43 EDT From: jeffa (Jeff Anuszczyk) To: freebsd-questions@freebsd.org Subject: Questions about creating a tape install for FreeBSD V2.0.5 using INSTALL guide Cc: jeffa Hi All, I've been following the install guide for V2.0.5-RELEASE and trying to create a tape installation. Basically, I downloaded all of the tree to a machine at work, recreating an exact duplicate. I then issued a: tar cvf /dev/rst4 bin floppies ... on a SunOS 4.1.3 Sparc5 workstation using a 4mm DAT tape. I took the tape home and tried to install it on my home system. This system is: P100 (ASUS PCI/I-P54TP4 motherboard) 40MB memory ASUS-SC200 PCI Scsi card, DEC DSP3107L 1.05GB hard disk Archive Python 4mm Date Tape #9GXE64Pro Graphics The symptoms are when I select load from tape it says to install the tape in the SCSI tape drive (which it already has loaded). I press return and the drive blinks then comes up with an error message saying it can't load error status '1'. Switching to ALT-F2 shows the message: st0: block size 10240 bytes too large for users buffer Hmmm. Did I create the tar tape incorrectly. The Install guide is a bit ambiguous on exactly how things should be done. I think I did it correctly, but the error indicates otherwise. Since this machine currently has an IDE ATAPI CD-ROM I, unfortunately, can't use a CD as installation. Any help here would be greatly appreciated! Thanks, - Jeff ----- End Included Message ----- From owner-freebsd-questions Wed Jun 21 14:54:02 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA08393 for questions-outgoing; Wed, 21 Jun 1995 14:54:02 -0700 Received: from GS81.SP.CS.CMU.EDU (GS81.SP.CS.CMU.EDU [128.2.205.91]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id OAA08371 ; Wed, 21 Jun 1995 14:53:57 -0700 Received: from localhost by GS81.SP.CS.CMU.EDU id aa09845; 21 Jun 95 17:53 EDT To: "Daniel M. Eischen" cc: gibbs@FREEBSD.ORG, mikebo@tellabs.com, questions@FREEBSD.ORG Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives In-reply-to: Your message of Wed, 21 Jun 1995 15:00:56 -0500. <9506212000.AA13314@iworks.InterWorks.org> Reply-To: moto@CS.cmu.edu From: moto@CS.cmu.edu Date: Wed, 21 Jun 1995 17:52:02 -0400 Message-ID: <9843.803771522@GS81.SP.CS.CMU.EDU> Sender: questions-owner@FREEBSD.ORG Precedence: bulk Hello, >> Another problem I'm having (under 2.0R) since installing the >> AHA2742AT card: Whenever I try to access the Exabyte 8200 8mm drive >> (even to do a "mt -f /dev/st1 rewind") I get a timeout message on >> the root disk drive, the drive select light stays lit and the >> entire system hangs. >> >> ahc0: target 0, lun 0 (sd0) timed out Abort unsupported! ahc0: >> target 0, lun 0 (sd0) timed out Abort unsupported! You're not alone! I'm seeing this, too. This problem seems to be related to my problem I posted to hackers@freebsd.org today. Gustin will kindly examine this problem when he gets a new EXABYTE from an RMA department. ============================================================================== Motonori Shindou Carnegie Mellon University SCS Graduate Student e-mail: moto@cs.cmu.edu, NiftyServe: GEG04056 WWW: http://www.cs.cmu.edu/afs/cs.cmu.edu/user/moto/WWW/moto-home.html TEL: 412-362-9636 FAX: 412-362-9634 ============================================================================== From owner-freebsd-questions Wed Jun 21 15:12:11 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA10132 for questions-outgoing; Wed, 21 Jun 1995 15:12:11 -0700 Received: from localhost.cdrom.com (localhost.cdrom.com [127.0.0.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id PAA10122 ; Wed, 21 Jun 1995From owner-freebsd-questions Wed Jun 21 15:49:44 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA11629 for questions-outgoing; Wed, 21 Jun 1995 15:49:44 -0700 Received: from mpp.com (mpp.Minn.Net [204.157.201.242]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id PAA11623 ; Wed, 21 Jun 1995 15:49:41 -0700 Received: (from mpp@localhost) by mpp.com (8.6.11/8.6.9) id RAA00258; Wed, 21 Jun 1995 17:49:29 -0500 From: Mike Pritchard Message-Id: <199506212249.RAA00258@mpp.com> Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives To: deischen@iworks.InterWorks.org (Daniel M. Eischen) Date: Wed, 21 Jun 1995 17:49:29 -0500 (CDT) Cc: gibbs@freebsd.org, mikebo@TELLABS.COM, questions@freebsd.org In-Reply-To: <9506212000.AA13314@iworks.InterWorks.org> from "Daniel M. Eischen" at Jun 21, 95 03:00:56 pm X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 2515 Sender: questions-owner@freebsd.org Precedence: bulk > >DEBUG: Notify: Attempting to extract from SCSI tape drive... > >DEBUG: Executing command 'cpio -iBduVm -H tar -I /dev/rst0' (Magic 0) > >st0(ahc1:2:0): ILLEGAL REQUEST > >st0: Cannot set selected mode > >st0: bad request, must be between 0 and 0 > >cpio: read error: Input/output error > >DEBUG: Command 'cpio -iBduVm -H tar -I /dev/rst0' returns status of 1 Are you booting with a tape in the drive? I just tracked down the "bad request, must be between 0 and 0" problem that I've seen before. If a tape is in the drive at boot time, st_mode_sense is called and sets the MEDIA_LOADED flag. When st_mount_tape is called and then calls st_rd_blk_lim, st_rd_blk_lim sees the MEDIA_LOADED flag and returns without doing anything, thus causing the above error. I fixed it by changing st_mode_sense to not set the MEDIA_LOADED flag, since st_mount_tape sets it when the mount is complete, and other code in the driver causes the MEDIA_LOADED flag to track the mount status, so changing the mode_sense routine to not fiddle with the MEDIA_LOADED flag seemed like the thing to do. I also removed the MEDIA_LOADED check from st_rd_blk_lim, since it is only called by st_mount_tape, and it makes sense to always read this information when mounting a new tape, just in cause the MEDIA_LOADED flag got confused somewhere along the way. Here is a patch to fix the problem (it also fixes a typo). It may also fix/or help the problem described in PR misc/531. *** orig/st.c Wed Jun 21 17:09:04 1995 --- st.c Wed Jun 21 17:21:42 1995 *************** *** 1017,1023 **** st->buf_queue = bp->b_actf; /* ! * if the device has been unmounted byt the user * then throw away all requests until done */ if ((!(st->flags & ST_MOUNTED)) --- 1017,1023 ---- st->buf_queue = bp->b_actf; /* ! * if the device has been unmounted by the user * then throw away all requests until done */ if ((!(st->flags & ST_MOUNTED)) *************** *** 1359,1370 **** errval errno; /* - * First check if we have it all loaded - */ - if ((sc_link->flags & SDEV_MEDIA_LOADED)) - return 0; - - /* * do a 'Read Block Limits' */ bzero(&scsi_cmd, sizeof(scsi_cmd)); --- 1359,1364 ---- *************** *** 1481,1487 **** if (page) { bcopy(&dat.page, page, pagelen); } - sc_link->flags |= SDEV_MEDIA_LOADED; return 0; } --- 1475,1480 ---- -- Mike Pritchard mpp@legarto.minn.net "Go that way. Really fast. If something gets in your way, turn" From owner-freebsd-questions Wed Jun 21 15:56:29 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA11868 for questions-outgoing; Wed, 21 Jun 1995 15:56:29 -0700 Received: from mail.eskimo.com (root@mail.eskimo.com [204.122.16.4]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id PAA11861 for ; Wed, 21 Jun 1995 15:56:28 -0700 Received: from eskimo.com by mail.eskimo.com (5.65c/1.35) id AA15383; Wed, 21 Jun 1995 15:56:23 -0700 Date: Wed, 21 Jun 1995 15:56:19 -0700 (PDT) From: Dave Haas To: questions@freebsd.org Subject: libXpm.so.4.5 and xemacs-19.11.tgz package Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk Hi there. I've just installed the xemacs package on my 2.0.5 FreeBSD box, and it doesn't want to run. I've tried invoking it many different ways, read all the man pages it comes with, but invariably it fails to execute with a : xemacs ld.so: xemacs: libXpm.so.4.5: Undefined error: 0 Please help! ---------------------------------------------------------------------------- ---------------------------------------------------------------------------- "The illegal we do immediately. The unconstitutional takes a bit longer." -- Henry Kissinger "It is now 10 p.m. Do you know where Henry Kissinger is?" -- Elizabeth Carpenter Dave Haas Island Computer Solutions daveh@eskimo.com (206) 842-0679 ---------------------------------------------------------------------------- ---------------------------------------------------------------------------- From owner-freebsd-questions Wed Jun 21 16:05:11 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id QAA12106 for questions-outgoing; Wed, 21 Jun 1995 16:05:11 -0700 Received: from cithe312.cithep.caltech.edu (cithe312.cithep.caltech.edu [131.215.124.112]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id QAA12100 for ; Wed, 21 Jun 1995 16:05:10 -0700 Received: by cithe312.cithep.caltech.edu (AIX 3.2/UCB 5.64/4.03) id AA20828; Wed, 21 Jun 1995 16:03:48 -0700 From: shih@cithe312.cithep.caltech.edu (Ching Shih) Message-Id: <9506212303.AA20828@cithe312.cithep.caltech.edu> Subject: using 3c589 (EtherLink III, PCMCIA) To: questions@freebsd.org Date: Wed, 21 Jun 1995 16:03:48 -0700 (PDT) X-Mailer: ELM [version 2.4 PL24] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 530 Sender: questions-owner@freebsd.org Precedence: bulk Hi all, First of all, the 2.0.5 works great for me. Thanks a lot for a job well done! As a user, I very appreciate all the work you have done! I just got a 3c589 as the network interface for my laptop. I re-compiled the kernel. It found the card. (Good!) I can make it talk to the LAN. For this moment, I am using thin-wide connector. I tried ifconfig zp0 ip-address netmask 0xffffff00 link0 up and as well as link1 and link2. None of them is working for me. Any advise? Thanks! Ching Shih shih@cithe312.cithep.caltech.edu From owner-freebsd-questions Wed Jun 21 16:12:13 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id QAA12247 for questions-outgoing; Wed, 21 Jun 1995 16:12:13 -0700 Received: from jolt.eng.umd.edu (jolt.eng.umd.edu [129.2.102.5]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id QAA12240 for ; Wed, 21 Jun 1995 16:12:11 -0700 Received: from espresso.eng.umd.edu (espresso.eng.umd.edu [129.2.98.13]) by jolt.eng.umd.edu (8.6.10/8.6.4) with ESMTP id TAA12781; Wed, 21 Jun 1995 19:12:08 -0400 Received: (chuckr@localhost) by espresso.eng.umd.edu (8.6.10/8.6.4) id TAA08797; Wed, 21 Jun 1995 19:12:07 -0400 Date: Wed, 21 Jun 1995 19:12:06 -0400 (EDT) From: Chuck Robey To: Swarthy cc: FreeBSD-questions@freefall.cdrom.com Subject: Re: vers? In-Reply-To: <199506211950.PAA00721@bluesky.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk On Wed, 21 Jun 1995, Swarthy wrote: > is FreeBSD Epsilon the newest version available? How well will it run X? > > Ha, someone's pulling your leg! FreeBSD uses version numbers, the current latest 'n greatest being 2.0.5, which has just been released. I don't think that there ever was any 'Epsilon' version. ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@eng.umd.edu | communications topic, C programming, and Unix. 7608 Topton St. | New Carrollton, MD 20784 | I run Journey2 (Freebsd 2.0) and n3lxx (301) 459-2316 | (FreeBSD 1.1.5.1) and am I happy! ----------------------------+----------------------------------------------- From owner-freebsd-questions Wed Jun 21 16:21:55 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id QAA12496 for questions-outgoing; Wed, 21 Jun 1995 16:21:55 -0700 Received: from GS81.SP.CS.CMU.EDU (GS81.SP.CS.CMU.EDU [128.2.205.91]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id QAA12490 ; Wed, 21 Jun 1995 16:21:54 -0700 Received: from localhost by GS81.SP.CS.CMU.EDU id aa09899; 21 Jun 95 19:20 EDT To: "Justin T. Gibbs" cc: moto@CS.cmu.edu, "Daniel M. Eischen" , gibbs@FREEBSD.ORG, mikebo@tellabs.com, questions@FREEBSD.ORG Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives In-reply-to: Your message of Wed, 21 Jun 1995 15:12:08 -0700. <199506212212.PAA10122@freefall.cdrom.com> Reply-To: moto@CS.cmu.edu From: moto@CS.cmu.edu Date: Wed, 21 Jun 1995 19:20:17 -0400 Message-ID: <9897.803776817@GS81.SP.CS.CMU.EDU> Sender: questions-owner@FREEBSD.ORG Precedence: bulk Hi, all, >>>>> "Justin" == Justin T Gibbs writes: > Another problem I'm having (under 2.0R) since installing the > AHA2742AT card: Whenever I try to access the Exabyte 8200 8mm drive > (even to do a "mt -f /dev/st1 rewind") I get a timeout message on > the root disk drive, the drive select light stays lit and the entire > system hangs. > > ahc0: target 0, lun 0 (sd0) timed out Abort unsupported! ahc0: > target 0, lun 0 (sd0) timed out Abort unsupported! >> You're not alone! I'm seeing this, too. This problem seems to be >> related to my problem I posted to hackers@freebsd.org today. >> Justin will kindly examine this problem when he gets a new EXABYTE >> from an RMA department. Justin> Are you not running 2.0.5R? Aborts are supported in the later Justin> revs of the aic7xxx driver. Yes, I'm using 2.0.5R. Sorry for the confusion. ============================================================================== Motonori Shindou Carnegie Mellon University SCS Graduate Student e-mail: moto@cs.cmu.edu, NiftyServe: GEG04056 WWW: http://www.cs.cmu.edu/afs/cs.cmu.edu/user/moto/WWW/moto-home.html TEL: 412-362-9636 FAX: 412-362-9634 ============================================================================== From owner-freebsd-questions Wed Jun 21 19:34:36 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id TAA17811 for questions-outgoing; Wed, 21 Jun 1995 19:34:36 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id TAA17800 for ; Wed, 21 Jun 1995 19:34:27 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id MAA25943; Thu, 22 Jun 1995 12:00:30 +0930 From: Michael Smith Message-Id: <199506220230.MAA25943@genesis.atrad.adelaide.edu.au> Subject: Re: 486DX2 FreeBSD boot.flp problems To: svanrafe@explorer.csc.com (Stefan Vanrafelghem) Date: Thu, 22 Jun 1995 12:00:30 +0930 (CST) Cc: freebsd-questions@FreeBSD.ORG, kevin@elwood In-Reply-To: from "Stefan Vanrafelghem" at Jun 21, 95 12:26:28 pm Content-Type: text Content-Length: 1470 Sender: questions-owner@FreeBSD.ORG Precedence: bulk Stefan Vanrafelghem stands accused of saying: > Unfortunately, I still cannot get my PC to boot up from the boot.flp floppy. > I gave the floppy to a friend, to try on his PC, and it worked fine! > So I guess it's not the floppy. "WHAT'S WRONG WITH MY PC?!?!" Um, what happens when you try to boot your machine? What errors do you get? > It has a Future Domain SCSI controller, which seems to be controlling: Which model? > one floppy drive > two hard drives > (1 Conner 1.4G and 1 Maxtor 240Meg) > one double speed CD-ROM. > > It also has a "Stealth 32" video card. That's a Diamond board; should work well under XFree86. > I don't know who manufactured the mother-board, but several of the chips > have "OPTi" labelled on them... (please excuse my ignorance.) That's OK. I haven't had any problems that could be traced to OPTi chipsets (yet 8) > If anyone knows of any problems with any of these devices please let me know. The SCSI controller may not be supported; IIRC, Future Domain have a fairly retentive policy concerning documentation. > Stefan J. Van Rafelghem -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Wed Jun 21 21:57:26 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id VAA09107 for questions-outgoing; Wed, 21 Jun 1995 21:57:26 -0700 Received: from netris1 (corpcomm.net [199.165.217.101]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id VAA09088 for ; Wed, 21 Jun 1995 21:57:22 -0700 Received: from fgo1-a2.corpcomm.net by netris1 (5.x/SMI-SVR4) id AA17791; Wed, 21 Jun 1995 23:54:18 -0500 Date: Wed, 21 Jun 1995 23:54:17 -0500 Message-Id: <9506220454.AA17791@netris1> X-Sender: sheeme@CorpComm.NET (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: "Daniel M. Eischen" From: sheeme@corpcomm.net (Steve Heemeyer) Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives Cc: questions@freebsd.org Sender: questions-owner@freebsd.org Precedence: bulk > >>Greetings - >>I sent e-mail on this problem to Justin, the author of the AIC7xxx >>driver. He suggested I post my problems to this list: >> >>I've been running an Adaptec 1542B controller under FBSD 2.0 in a 486/50 >>EISA/VESA system for some time. I've never had a problem with my Archive >>Viper QIC150 and Exabyte 8200 tape drives before. Last week, I got an >>Adaptec 2742AT EISA dual-channel SCSI card, and have been unable to use >>either tape drive since. >> >>Thinking that the new and improved 274x driver code in v2.0.5R might >>solve the problem, I tried installing the new OS. The QIC150 tape install >>failed with the same error I get under 2.0R whenever I try to access the >>Archive Viper QIC150 drive. >> >>DEBUG: Notify: Attempting to extract from SCSI tape drive... >>DEBUG: Executing command 'cpio -iBduVm -H tar -I /dev/rst0' (Magic 0) >>st0(ahc1:2:0): ILLEGAL REQUEST >>st0: Cannot set selected mode >>st0: bad request, must be between 0 and 0 >>cpio: read error: Input/output error >>DEBUG: Command 'cpio -iBduVm -H tar -I /dev/rst0' returns status of 1 > >How was the Q150 tape made and what block size did you use? The >tape install failed for me on a HP 1533C DAT tape drive when I >made the tape with the default block size (for tar) of 20*512 bytes. >When I remade the tape with a blocking factor of 1, it worked. >I got an illegal block size message on the failed attempt, so >that's probably not your problem - I'm just throwing it out there. > I am seeing a similar problem on an Ultrastor 34f controller and a Tandberg 3800 tape drive. Jun 20 23:01:02 Fridmani /kernel: st0(uha0:6:0): ILLEGAL REQUEST \ csi:10,8,0,0 asc:24,0 Invalid field in CDB field replaceable unit: 2 Jun 20 23:01:02 Fridmani /kernel: st0: Cannot set selected mode the tape drive appears to probe fine when booting, however any attempt to access the drive results in the above error. One quick note, the tape drive worked successfully until I upgraded to 2.0.5A via a fresh install. [stuff deleted] >>Any help or comments are much appreciated... >>- Mike >>-- >>-------------------------------------------------------------------------- >>Michael Borowiec Network Operations Tellabs Operations, Inc. >>mikebo@TELLABS.COM 1000 Remington Blvd. MS109 >>708-378-6007 FAX: 708-378-6714 Bolingbrook, IL, USA 60440 >>-------------------------------------------------------------------------- > >Dan Eischen >deischen@iworks.InterWorks.org > Steve Heemeyer sheeme@CorpComm.NET From owner-freebsd-questions Thu Jun 22 04:56:08 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id EAA28190 for questions-outgoing; Thu, 22 Jun 1995 04:56:08 -0700 Received: from cc.jyu.fi (root@cc.jyu.fi [130.234.0.6]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id EAA28182 for ; Thu, 22 Jun 1995 04:56:01 -0700 Received: from [130.234.41.39] (zaphod.maccc.jyu.fi) by cc.jyu.fi with SMTP id AA01932 (5.67a/IDA-1.4.4); Thu, 22 Jun 1995 14:45:02 +0300 X-Sender: kallio@pop.jyu.fi Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Thu, 22 Jun 1995 14:45:28 +0300 To: Brian Tao From: kallio@jyu.fi (Seppo Kallio) Subject: Re: More terminals for telnet connections - how to do them Cc: Seppo Kallio , questions@freebsd.org Sender: questions-owner@freebsd.org Precedence: bulk At 23:09 19/6/95, Brian Tao wrote: >On Fri, 16 Jun 1995, Seppo Kallio wrote: >> >> I need more pseudo terminals (?) for incomming telnet sessions. How to >> make them? Systems seems to have only 32 (?) I have increased the kernel >> parameter to 80 - so I think the problem is in /dev/tty?? > > /dev/MAKEDEV pty1 pty2 pty3 ... (each giving you another 32 ptys) It seems that I must add more ttypw-ttyrz lines to the file /etc/ttys Without them system is working strange: If I login I am getting a new session but who/finger/w is not showing the new session. Seppo -- +-- Seppo Kallio ----- kallio@jyu.fi ---+ ! Computing Center ! Fax +358-41-603611 Phone +358-41-603606 ! ! University of Jyvaskyla ! http://www.jyu.fi/~kallio ! +-- Finland --+-- 62.14N 25.44E -- + From owner-freebsd-questions Thu Jun 22 06:35:00 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA05762 for questions-outgoing; Thu, 22 Jun 1995 06:35:00 -0700 Received: from tserv.lodgenet.com (root@dial6.iw.net [204.157.148.55]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id GAA05421 for ; Thu, 22 Jun 1995 06:33:34 -0700 Received: from jake.lodgenet.com (jake.lodgenet.com [204.124.120.30]) by tserv.lodgenet.com (8.6.12/8.6.12) with ESMTP id IAA04338 for ; Thu, 22 Jun 1995 08:33:46 -0500 Received: from localhost (localhost [127.0.0.1]) by jake.lodgenet.com (8.6.11/8.6.9) with SMTP id IAA14794 for ; Thu, 22 Jun 1995 08:34:36 -0500 Message-Id: <199506221334.IAA14794@jake.lodgenet.com> X-Authentication-Warning: jake.lodgenet.com: Host localhost didn't use HELO protocol X-Mailer: exmh version 1.6 4/21/95 To: questions@freebsd.org Subject: sendto: No buffer space available Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 22 Jun 1995 08:34:34 -0500 From: "Eric L. Hernes" Sender: questions-owner@freebsd.org Precedence: bulk I just tried to do a traceroute to ftp.freebsd.org and got this message. Where is it coming from? bash$ traceroute ftp.freebsd.org traceroute to wcarchive.cdrom.com (192.216.191.11), 30 hops max, 40 byte packets sendto: No buffer space available 1 traceroute: wrote wcarchive.cdrom.com 40 chars, ret=-1 Is there a kernel parameter I need to bump? eric. -- erich@lodgenet.com erich@rrnet.com From owner-freebsd-questions Thu Jun 22 07:57:23 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA11012 for questions-outgoing; Thu, 22 Jun 1995 07:57:23 -0700 Received: from tellab5.lisle.tellabs.com (tellab5.lisle.tellabs.com [138.111.243.28]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id HAA11006 ; Thu, 22 Jun 1995 07:57:21 -0700 Received: from genesis by tellab5.lisle.tellabs.com with smtp (Smail3.1.29.1 #4) id m0sOnb4-000jDSC; Thu, 22 Jun 95 09:51 CDT Message-Id: From: mikebo@tellabs.com (Mike Borowiec) Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives To: mpp@legarto.minn.net (Mike Pritchard) Date: Thu, 22 Jun 1995 09:51:07 -0500 (CDT) Cc: deischen@iworks.InterWorks.org, gibbs@freebsd.org, mikebo@tellabs.com, questions@freebsd.org In-Reply-To: <199506212249.RAA00258@mpp.com> from "Mike Pritchard" at Jun 21, 95 05:49:29 pm X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1362 Sender: questions-owner@freebsd.org Precedence: bulk Mike wrote: > > > >DEBUG: Notify: Attempting to extract from SCSI tape drive... > > >DEBUG: Executing command 'cpio -iBduVm -H tar -I /dev/rst0' (Magic 0) > > >st0(ahc1:2:0): ILLEGAL REQUEST > > >st0: Cannot set selected mode > > >st0: bad request, must be between 0 and 0 > > >cpio: read error: Input/output error > > >DEBUG: Command 'cpio -iBduVm -H tar -I /dev/rst0' returns status of 1 > > Are you booting with a tape in the drive? I just tracked down > the "bad request, must be between 0 and 0" problem that > I've seen before. If a tape is in the drive at boot time, > st_mode_sense is called and sets the MEDIA_LOADED flag. > When st_mount_tape is called and then calls st_rd_blk_lim, > st_rd_blk_lim sees the MEDIA_LOADED flag and returns without doing > anything, thus causing the above error. > ... stuff deleted ... I'll try your patch, but yes, I've tried booting both with and without the load tape in the drive. It didn't seem to make any difference... - Mike -- -------------------------------------------------------------------------- Michael Borowiec Network Operations Tellabs Operations, Inc. mikebo@TELLABS.COM 1000 Remington Blvd. MS109 708-378-6007 FAX: 708-378-6714 Bolingbrook, IL, USA 60440 -------------------------------------------------------------------------- From owner-freebsd-questions Thu Jun 22 08:03:24 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA11213 for questions-outgoing; Thu, 22 Jun 1995 08:03:24 -0700 Received: from tellab5.lisle.tellabs.com (tellab5.lisle.tellabs.com [138.111.243.28]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id IAA11206 ; Thu, 22 Jun 1995 08:03:21 -0700 Received: from genesis by tellab5.lisle.tellabs.com with smtp (Smail3.1.29.1 #4) id m0sOnXg-000jCFC; Thu, 22 Jun 95 09:47 CDT Message-Id: From: mikebo@tellabs.com (Mike Borowiec) Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives To: gibbs@freefall.cdrom.com (Justin T. Gibbs) Date: Thu, 22 Jun 1995 09:47:37 -0500 (CDT) Cc: moto@cs.cmu.edu, deischen@iworks.interworks.org, gibbs@freebsd.org, mikebo@tellabs.com, questions@freebsd.org In-Reply-To: <199506212212.PAA10122@freefall.cdrom.com> from "Justin T. Gibbs" at Jun 21, 95 03:12:08 pm X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1541 Sender: questions-owner@freebsd.org Precedence: bulk Justin wrote: > >>> Another problem I'm having (under 2.0R) since installing the > >>> AHA2742AT card: Whenever I try to access the Exabyte 8200 8mm drive > >>> (even to do a "mt -f /dev/st1 rewind") I get a timeout message on > >>> the root disk drive, the drive select light stays lit and the > >>> entire system hangs. > >>> > >>> ahc0: target 0, lun 0 (sd0) timed out Abort unsupported! ahc0: > >>> target 0, lun 0 (sd0) timed out Abort unsupported! > > > >You're not alone! I'm seeing this, too. This problem seems to be > >related to my problem I posted to hackers@freebsd.org today. Justin > >will kindly examine this problem when he gets a new EXABYTE from an > >RMA department. > > Are you not running 2.0.5R? Aborts are supported in the later revs > of the aic7xxx driver. > Argh! I got the error while attempting to make an 8mm 2.0.5R load tape! I can't write to my Archive Viper QIC150 because of the st0(ahc1:2:0): ILLEGAL REQUEST st0: Cannot set selected mode st0: bad request, must be between 0 and 0 problem, so as a last resort I was trying to use my Exabyte... so you see, I'm in a catch 22 (short of loading from floppy disk!). - Mike -- -------------------------------------------------------------------------- Michael Borowiec Network Operations Tellabs Operations, Inc. mikebo@TELLABS.COM 1000 Remington Blvd. MS109 708-378-6007 FAX: 708-378-6714 Bolingbrook, IL, USA 60440 -------------------------------------------------------------------------- From owner-freebsd-questions Thu Jun 22 08:18:16 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA11911 for questions-outgoing; Thu, 22 Jun 1995 08:18:16 -0700 Received: from aries.ibms.sinica.edu.tw ([140.109.40.248]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id IAA11900 for ; Thu, 22 Jun 1995 08:17:59 -0700 Received: (from taob@localhost) by aries.ibms.sinica.edu.tw (8.6.11/8.6.9) id XAA00618; Thu, 22 Jun 1995 23:16:38 +0800 Date: Thu, 22 Jun 1995 23:16:38 +0800 (CST) From: Brian Tao To: Seppo Kallio cc: questions@freebsd.org Subject: Re: More terminals for telnet connections - how to do them In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk On Thu, 22 Jun 1995, Seppo Kallio wrote: > > It seems that I must add more ttypw-ttyrz lines to the file /etc/ttys Oh, that's right... I already had those in my /etc/ttys file (up to ttysv or something, not like I'd ever use that many). -- Brian ("Though this be madness, yet there is method in't") Tao taob@gate.sinica.edu.tw <-- work ........ play --> taob@io.org From owner-freebsd-questions Thu Jun 22 08:23:07 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA12294 for questions-outgoing; Thu, 22 Jun 1995 08:23:07 -0700 Received: from mpp.com (mpp.Minn.Net [204.157.201.242]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id IAA12275 for ; Thu, 22 Jun 1995 08:23:05 -0700 Received: (from mpp@localhost) by mpp.com (8.6.11/8.6.9) id KAA03526 for freebsd-questions@freebsd.org; Thu, 22 Jun 1995 10:23:02 -0500 From: Mike Pritchard Message-Id: <199506221523.KAA03526@mpp.com> Subject: Majordomo problem To: freebsd-questions@freebsd.org Date: Thu, 22 Jun 1995 10:23:01 -0500 (CDT) X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 434 Sender: questions-owner@freebsd.org Precedence: bulk I just noticed that I somehow got unsubscribed to several of the freebsd-* mailing lists - hackers, current and questions being the most obvious ones. It looks like this happened sometime in the past 24 hours, since I have some freebsd-questions mail from yesterday in my mailbox. Does anyone have any idea why this happened? -- Mike Pritchard mpp@legarto.minn.net "Go that way. Really fast. If something gets in your way, turn" From owner-freebsd-questions Thu Jun 22 08:45:09 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA13053 for questions-outgoing; Thu, 22 Jun 1995 08:45:09 -0700 Received: from btr0x1.hrz.uni-bayreuth.de (btr0x1.hrz.uni-bayreuth.de [132.180.8.29]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id IAA13026 for ; Thu, 22 Jun 1995 08:45:05 -0700 Received: from btp1x5 (btp1x5.phy.uni-bayreuth.de) by btr0x1.hrz.uni-bayreuth.de (4.1/btr0x1 (UBTGW/btr0x1-2.4.7)) id AA17834; Thu, 22 Jun 95 17:44:55 +0200 Received: by btp1x5; (5.65/1.1.8.2/13Mar95-1216PM) id AA04160; Thu, 22 Jun 1995 17:48:12 +0100 From: griessl Message-Id: <9506221648.AA04160@btp1x5> Subject: RE: fatal signal ... To: questions@freebsd.org Date: Thu, 22 Jun 1995 17:48:11 +0100 (WET DST) X-Mailer: ELM [version 2.4 PL24] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 2111 Sender: questions-owner@freebsd.org Precedence: bulk yesterday I wrote following message: < I have in FreeBSD-2.0.5-ALPHA from time to time this compiler error: < "cc: Internal compiler error: program cc1 got fatal signal 11" < After a reboot the same source compiles without any errors or warnings ! < Is there anybody, who know the reason ? < Werner Today I tried to find the problem. from 3 xterms over the net: 1. compile a kernel ffs 2. cd /usr/ports/editors/xemacs; make clean; nice make nfs 3. compile a "jumbo"-fortran-program nfs after ~1/2 hour: in all 3 xterms ... fatal signal 10 (not 11) from now on EVERY compilerruns after a few seconds: fatal signal 10 ! reboot the machine. try to compile only the kernel from a xterm: after a few minutes: signal 11 ! reboot the machine. compile the kernel from the console: works ! install the new kernel, reboot the machine. from 3 virtual consoles: 1. compile a kernel ffs 2. cd /usr/ports/editors/xemacs; make clean; nice make nfs 3. compile a "jumbo"-fortran-program nfs after 2 hours heavy load, success ! same from 3 xterms: also success ! here are the kernel-config changes I made: 20,21c20,21 < #options MSDOSFS #MSDOS Filesystem < #options "CD9660" #ISO 9660 Filesystem --- > options MSDOSFS #MSDOS Filesystem > options "CD9660" #ISO 9660 Filesystem 32c32 < #options BOUNCE_BUFFERS #include support for DMA bounce buffers --- > options BOUNCE_BUFFERS #include support for DMA bounce buffers 43,47c43 < #config kernel root on wd0 swap on wd0 and vn0 dumps on wd0 < config kernel root on wd0 < < # Allow this many swap-devices. < options "NSWAPDEV=4" --- > config kernel root on wd0 swap on wd0 and vn0 dumps on wd0 short: no bounce buffers, no msdosfs, no cd9660 and no swap- and dump-device in the "config kernel ..." line. now the system looks stable, but I don't no why. was it the swap-device-entry ??? (the new swapdev name in 2.0.5-ALPHA is now /dev/wd0s4b, not wd0b) Werner From owner-freebsd-questions Thu Jun 22 09:11:26 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA14683 for questions-outgoing; Thu, 22 Jun 1995 09:11:26 -0700 Received: from plains.nodak.edu (tinguely@plains.NoDak.edu [134.129.111.64]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id JAA14673 for ; Thu, 22 Jun 1995 09:11:22 -0700 Received: (from tinguely@localhost) by plains.nodak.edu (8.6.11/8.6.10) id LAA08079 for freebsd-questions@freebsd.org; Thu, 22 Jun 1995 11:11:10 -0500 Date: Thu, 22 Jun 1995 11:11:10 -0500 From: Mark Tinguely Message-Id: <199506221611.LAA08079@plains.nodak.edu> To: freebsd-questions@freebsd.org Subject: VAT how-to question Content-Length: 791 Sender: questions-owner@freebsd.org Precedence: bulk I feel stupid to ask this question since I have vat running on a earlier SNAPSHOT, but, when I try to run vat on a GUS card with FreeBSD 2.0.5 Alpha/Release, it fails. Help. 1) I added "pseudo-device vat_audio" to the configuration file, and rebuilt and installed the kernel. 2) MAKEDEV snd and vat 3) used the vat binary from ftp.ee.lbl.gov (is there suppose to be a new copy of vat that uses /dev/vatio instead of /dev/audio?). all I get is several message of the type: /kernel: Sound: Audio queue4 corrupted for dev0 (1782/16) the vat application locks up /dev/audio until it is through sysloging all the error messages. --mark. PS. since vat uses voxware drivers, does this mean that vat can be played on a soundblaster (yeah, I know sound blasters are unidirectional). From owner-freebsd-questions Thu Jun 22 09:25:13 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA15418 for questions-outgoing; Thu, 22 Jun 1995 09:25:13 -0700 Received: from localhost.cdrom.com (localhost.cdrom.com [127.0.0.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id JAA15410 ; Thu, 22 Jun 1995 09:25:11 -0700 Message-Id: <199506221625.JAA15410@freefall.cdrom.com> X-Authentication-Warning: freefall.cdrom.com: Host localhost.cdrom.com didn't use HELO protocol To: mikebo@tellabs.com (Mike Borowiec) cc: moto@cs.cmu.edu, deischen@iworks.interworks.org, gibbs@freebsd.org, questions@freebsd.org Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives In-reply-to: Your message of "Thu, 22 Jun 95 09:47:37 CDT." Date: Thu, 22 Jun 1995 09:25:11 -0700 From: "Justin T. Gibbs" Sender: questions-owner@freebsd.org Precedence: bulk >Argh! >I got the error while attempting to make an 8mm 2.0.5R load tape! >I can't write to my Archive Viper QIC150 because of the > >st0(ahc1:2:0): ILLEGAL REQUEST >st0: Cannot set selected mode >st0: bad request, must be between 0 and 0 > >problem, so as a last resort I was trying to use my Exabyte... >so you see, I'm in a catch 22 (short of loading from floppy disk!). > >- Mike You only need two floppies in order to get a shell on vty4 that gives you some functionality (ie boot and root floppies). -- Justin T. Gibbs =========================================== Software Developer - Walnut Creek CDROM FreeBSD: Turning PCs into workstations =========================================== From owner-freebsd-questions Thu Jun 22 12:25:17 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA21769 for questions-outgoing; Thu, 22 Jun 1995 12:25:17 -0700 Received: from gordius.gordian.com (gordius.gordian.com [192.73.220.81]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id MAA21762 for ; Thu, 22 Jun 1995 12:25:15 -0700 Received: from hermes (hermes.gordian.com [192.73.220.111]) by gordius.gordian.com (8.6.11/8.6.5) with SMTP id MAA27648; Thu, 22 Jun 1995 12:24:38 -0700 Received: by hermes (920330.SGI/920502.SGI) for @gordius.gordian.com:freebsd-questions@freebsd.org id AA04236; Thu, 22 Jun 95 12:24:31 -0700 Date: Thu, 22 Jun 95 12:24:31 -0700 From: steve@gordian.com (Steve Khoo) Message-Id: <9506221924.AA04236@hermes> To: LARRYD@bldg1.croute.com Cc: freebsd-questions@freebsd.org In-Reply-To: <793FDC2183D@bldg1.croute.com> (LARRYD@bldg1.croute.com) Subject: Re: router card Sender: questions-owner@freebsd.org Precedence: bulk | | How about a 128kbps ISDN card for ~$400 or maybe less? Where'd you find it at this price? The best I've seen was still MSRP: $595. | | DigiBoard DataFire ISDN LAN Adapter. It's an ISA-bus board. It has a | built in NT1 and provide ISDN U interface to connect directly to your | ISDN phone line. | Thanks, larry Try Hank Wilkinson @ Computer City (714)513-3336 if you're local. If not local try any Computer City sales rep near you. From owner-freebsd-questions Thu Jun 22 14:30:28 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA26724 for questions-outgoing; Thu, 22 Jun 1995 14:30:28 -0700 Received: from emunix.emich.edu (emunix.emich.edu [164.76.4.2]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id OAA26718 for ; Thu, 22 Jun 1995 14:30:26 -0700 Received: by emunix.emich.edu (5.65/DEC-Ultrix/4.3) id AA08428; Thu, 22 Jun 1995 17:32:10 -0400 Date: Thu, 22 Jun 1995 17:32:10 -0400 From: apearlst@emunix.emich.edu (Arona Pearlstein) Message-Id: <9506222132.AA08428@emunix.emich.edu> To: questions@freebsd.org Subject: Intel Etherexpress net card support? Sender: questions-owner@freebsd.org Precedence: bulk the FreeBSD.README mentions that 2.0.5 now has support for this card. However, I do not any reference to it in LINT or anywhere else. So, is it actually supported yet or not? From owner-freebsd-questions Thu Jun 22 14:58:55 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA27895 for questions-outgoing; Thu, 22 Jun 1995 14:58:55 -0700 Received: from jolt.eng.umd.edu (jolt.eng.umd.edu [129.2.102.5]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id OAA27889 for ; Thu, 22 Jun 1995 14:58:53 -0700 Received: from latte.eng.umd.edu (latte.eng.umd.edu [129.2.98.15]) by jolt.eng.umd.edu (8.6.10/8.6.4) with ESMTP id RAA18568; Thu, 22 Jun 1995 17:58:33 -0400 Received: (chuckr@localhost) by latte.eng.umd.edu (8.6.10/8.6.4) id RAA09847; Thu, 22 Jun 1995 17:58:32 -0400 Date: Thu, 22 Jun 1995 17:58:32 -0400 (EDT) From: Chuck Robey To: Michael Smith cc: questions@FreeBSD.org Subject: Re: 2.0.5R CD's / subscription In-Reply-To: <199506210410.NAA24324@genesis.atrad.adelaide.edu.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk On Wed, 21 Jun 1995, Michael Smith wrote: > > A simple question for those in the know: > > I'd like to join the FreeBSD CD subscription program, however > AFAIK, walnuts are still shipping 2.0R, and I already have > one of those. Their web pages still offer 2.0R as the 'current' > version, which implies that the 2.0.5 disks aren't back from > duplication yet. > > Thus : What should I do to join the subscription program and > ensure that the first item I receive is the 2.0.5R set? Just call them and tell them you want the new CDROM when it's available. Or tell them you start your subscription at that point (it's cheaper). ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@eng.umd.edu | communications topic, C programming, and Unix. 7608 Topton St. | New Carrollton, MD 20784 | I run Journey2 (Freebsd 2.0) and n3lxx (301) 459-2316 | (FreeBSD 1.1.5.1) and am I happy! ----------------------------+----------------------------------------------- From owner-freebsd-questions Thu Jun 22 15:02:56 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA28262 for questions-outgoing; Thu, 22 Jun 1995 15:02:56 -0700 Received: from arthur.cs.purdue.edu (root@arthur.cs.purdue.edu [128.10.2.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id PAA28243 for ; Thu, 22 Jun 1995 15:02:53 -0700 Received: from moriarty.cs.purdue.edu (root@moriarty.cs.purdue.edu [128.10.2.69]) by arthur.cs.purdue.edu (8.6.10/PURDUE_CS-1.3) with ESMTP id for ; Thu, 22 Jun 1995 17:02:50 -0500 Received: from localhost (jha@localhost [127.0.0.1]) by moriarty.cs.purdue.edu (8.6.10/PURDUE_CS-1.3) with SMTP id for ; Thu, 22 Jun 1995 17:02:49 -0500 Message-Id: <199506222202.RAA04279@moriarty.cs.purdue.edu> To: freebsd-questions@freebsd.org Subject: Buslogic 946c on 0xfcfc Date: Thu, 22 Jun 1995 17:02:47 -0500 From: jha@cs.purdue.edu ("John H. Aughey") Sender: questions-owner@freebsd.org Precedence: bulk I have a Buslogic 946c PCI SCSI controller that is currently configured to use port 0xfcfc. However, when I boot with a kernel with the line: controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr And manually change the port when I boot (or change IO_BT0) it complains the bt_iobase is disabled or invalid. I was using this same controller with FBSD 2.0, but I do not remember what I did to get it working correctly. Can someone help me out with this? --- John Aughey (Systems Support Staff) jha@cs.purdue.edu From owner-freebsd-questions Thu Jun 22 15:33:15 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA02538 for questions-outgoing; Thu, 22 Jun 1995 15:33:15 -0700 Received: from birch.ee.vt.edu (birch.ee.vt.edu [128.173.88.34]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id PAA02528 for ; Thu, 22 Jun 1995 15:33:13 -0700 Received: from fox.ee.vt.edu by birch.ee.vt.edu (4.1/SMI-4.1) id AA10759; Thu, 22 Jun 95 18:33:11 EDT From: yzalkow@birch.ee.vt.edu (Yuval Zalkow) Received: by fox.ee.vt.edu (1.38.193.4) id AA00728; Thu, 22 Jun 1995 18:33:10 -0400 Message-Id: <9506222233.AA00728@fox.ee.vt.edu> Subject: Best way to update from 2.0R to 2.0.5R To: questions@freebsd.org Date: Thu, 22 Jun 95 18:33:09 EDT Mailer: Elm [revision: 70.85] Sender: questions-owner@freebsd.org Precedence: bulk Hello, Can someone tell me the best way to upgrade my system from 2.0R to 2.0.5R? I have a pretty standard 2.0R install. All of my user and locally made programs are in seperate directories. I want NOT to reformat both hard drives and start from scratch installing. I tried to download the entire source tree 2.0.5R and compile it to install the new version, but that didn't work -- I ran into many compile problems with things like constants and headers not found. So far, I haven't been having much success. Any good insights into this problem would be helpful. I don't have a fast connection to the net, only a 14.4Kbps modem SLIP connection through school. I have a bunch of other machines on a local network, which can do NFS, but its a painfully slow NFS -- through OS/2. Last time I tried it under Linux served NFS, it didn't too well either. I haven't had much luck with the install program in 2.0. So basically, what is the best route to take in order to upgrade the system from 2.0R to 2.0.5R? Secondly, after I get the system up to 2.0.5R, will I have to recompile all my utilties I made under 2.0R? I guess lastly, I have problems with using the lnc driver for networks. I have to network cards, one is a very generic NE2000 clone which runs under the ed driver just fine. The problem is I cannot get the lnc driver to work with the ed driver, I will soon need both to work. I get a "heartbeat failure" error from my Boca Network card which uses the Lance chipset. I'm pretty sure that its not a configuration problem, and I would be willing to go into more depth, but I don't think everybody needs to hear about it. If I could be pointed in the right direction, that would be great. thanks, -- Chris Inacio ------------------------------------------------------------------------------- cinacio@vt.edu | Computer Engineering | Nifty quote here! yzalkow@birch.ee.vt.edu | Virginia Tech | inacio@x-logic.async.vt.edu | | From owner-freebsd-questions Thu Jun 22 16:28:41 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id QAA04548 for questions-outgoing; Thu, 22 Jun 1995 16:28:41 -0700 Received: from iworks.InterWorks.org (iworks.interworks.org [128.255.18.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id QAA04542 for ; Thu, 22 Jun 1995 16:28:39 -0700 Received: by iworks.InterWorks.org (1.37.109.8/16.2) id AA21982; Thu, 22 Jun 1995 18:23:16 -0500 Message-Id: <9506222323.AA21982@iworks.InterWorks.org> Date: Thu, 22 Jun 1995 18:23:16 -0500 From: "Daniel M. Eischen" To: mikebo@TELLABS.COM, questions@freebsd.org Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives Sender: questions-owner@freebsd.org Precedence: bulk >> >st0(ahc1:2:0): ILLEGAL REQUEST > >st0: Cannot set selected mode > >st0: bad request, must be between 0 and 0 > > How was the Q150 tape made and what block size did you use? The > tape install failed for me on a HP 1533C DAT tape drive when I > made the tape with the default block size (for tar) of 20*512 bytes. > When I remade the tape with a blocking factor of 1, it worked. > I got an illegal block size message on the failed attempt, so > that's probably not your problem - I'm just throwing it out there. I had this problem when I tried installing 2.0.5R from an Archive 250ST. I made the tape using a block size of 1, with just the bin dist on it using the command: tar -cv -b 1 -f /dev/rst0 bin When I tried installing from SCSI tape, the error message above was sent to the console. The problem was that the SCSI tape was locked up (LED lamp on) from the time of boot. Yes, the driver had a tape in it during bootup. During a normal boot, the LED is off on the driver. (I'm using an Adaptec 1542AorB) I escaped to the emergency shell and tried some basic mt commands which should and do work with this drive. Like mt -f /dev/rst0 rewind, mt -f /dev/rst0 fsf, etc. Nothing worked, it was locked up real good. Mike (Pritchard?), I didn't try your patch as yet - I just used the boot floppy in UPDATES. I went back to the installation menu and selected installation from floppies. All I had was the root floppy, so I let it install just enough of the utilities I needed (tar, ls, whatever). When it asked for more floppies, I went to the emergency shell. From there I got enough networking up to ftp the whole installation set. I had to install these by hand. Anyway, I guess the point is that you can still install if you can get enough networking up to get at your files. Thanks for the emergency shell! I tried playing around with the installation menus and try to get FreeBSD to install via ftp automagically, but we don't have a naming server and have to use passive ftp to get outside the firewall. I had all the files stored on a machine within our local network. Is there a way to install from your own site without a naming server? Dan Eischen deischen@iworks.InterWorks.org From owner-freebsd-questions Thu Jun 22 16:54:01 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id QAA05862 for questions-outgoing; Thu, 22 Jun 1995 16:54:01 -0700 Received: from floyd.santarosa.edu (dom@floyd.santarosa.edu [198.189.21.38]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id QAA05856 for ; Thu, 22 Jun 1995 16:54:00 -0700 Received: (from dom@localhost) by floyd.santarosa.edu (8.6.10/8.6.10) id QAA20987; Thu, 22 Jun 1995 16:55:33 -0700 Date: Thu, 22 Jun 95 16:55:33 -0700 (PDT) From: Dominic Franchetti Subject: Re: Multiple serial ports To: questions@freebsd.org In-Reply-To: <9506222323.AA21982@iworks.InterWorks.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk Does FreeBSd suport Digi's PC/8 board? I already have one so it would be nice if it supported it. From owner-freebsd-questions Thu Jun 22 17:45:39 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id RAA08735 for questions-outgoing; Thu, 22 Jun 1995 17:45:39 -0700 Received: from hda.com (hda.com [199.232.40.182]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id RAA08727 for ; Thu, 22 Jun 1995 17:45:34 -0700 Received: (dufault@localhost) by hda.com (8.6.11/8.3) id UAA06585; Thu, 22 Jun 1995 20:43:59 -0400 From: Peter Dufault Message-Id: <199506230043.UAA06585@hda.com> Subject: Re: Multiple serial ports To: dom@floyd.santarosa.edu (Dominic Franchetti) Date: Thu, 22 Jun 1995 20:43:59 -0400 (EDT) Cc: questions@freebsd.org In-Reply-To: from "Dominic Franchetti" at Jun 22, 95 04:55:33 pm X-Mailer: ELM [version 2.4 PL24] Content-Type: text Content-Length: 1270 Sender: questions-owner@freebsd.org Precedence: bulk Dominic Franchetti writes: > Does FreeBSd suport Digi's PC/8 board? I already have one so it would be > FreeBSD doesn't have a DigiBoard driver for the intelligent DigiBoards. (We have to put the balance of this answer in the FAQ:) FreeBSD does not yet support any of the DigiBoard products with the FEP (Front End Processor) interface. The information needed to program these boards requires a non-disclosure aggreement, precluding the usual FreeBSD practice of releasing the source code under a Berkeley style licence. Though this doesn't prevent anyone from writing the driver, it does put the author in the "hot seat" as a single point of support. Digi has made a Linux driver available due to market demand. Serge Babkin (babkin@hq.icb.chel.su) is working on a port of that driver. When finished, the driver will be a GPL driver in the GPL part of the source tree, and binary kernels with the driver will not be supplied in the "official" distribution. Questions about DigiBoard support for FreeBSD and other questions about DigiBoard products should be addressed to info@digibd.com. -- Peter Dufault Real Time Machine Control and Simulation HD Associates, Inc. Voice: 508 433 6936 dufault@hda.com Fax: 508 433 5267 From owner-freebsd-questions Thu Jun 22 19:58:46 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id TAA15306 for questions-outgoing; Thu, 22 Jun 1995 19:58:46 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id TAA15300 for ; Thu, 22 Jun 1995 19:58:42 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id MAA27780; Fri, 23 Jun 1995 12:26:53 +0930 From: Michael Smith Message-Id: <199506230256.MAA27780@genesis.atrad.adelaide.edu.au> Subject: Re: Best way to update from 2.0R to 2.0.5R To: yzalkow@birch.ee.vt.edu (Yuval Zalkow) Date: Fri, 23 Jun 1995 12:26:52 +0930 (CST) Cc: questions@freebsd.org In-Reply-To: <9506222233.AA00728@fox.ee.vt.edu> from "Yuval Zalkow" at Jun 22, 95 06:33:09 pm Content-Type: text Content-Length: 3422 Sender: questions-owner@freebsd.org Precedence: bulk Yuval Zalkow stands accused of saying: > Hello, Greetings. Perhaps that should be G'day... > Can someone tell me the best way to upgrade my system from 2.0R to > 2.0.5R? I have a pretty standard 2.0R install. All of my user and locally > made programs are in seperate directories. Sensible move. > I want NOT to reformat both > hard drives and start from scratch installing. I tried to download the > entire source tree 2.0.5R and compile it to install the new version, but > that didn't work -- I ran into many compile problems with things like constants Um. Despite the continual stream of postings and mailing list traffic saying _don't_bother_it_doesn't_work_? > and headers not found. So far, I haven't been having much success. Any good > insights into this problem would be helpful. I don't have a fast connection > to the net, only a 14.4Kbps modem SLIP connection through school. I have a That's plenty. If you just install a small system to begin with and bring stuff in a little at a time, you'll be fine. > bunch of other machines on a local network, which can do NFS, but its a > painfully slow NFS -- through OS/2. Last time I tried it under Linux served > NFS, it didn't too well either. I haven't had much luck with the install Linux' NFS is crap. If you have an OS/2 box on your local network running TCP/IP, use it to route your SLIP link to ethernet, and do an FTP install. > program in 2.0. So basically, what is the best route to take in order to > upgrade the system from 2.0R to 2.0.5R? (First a quick question; do you have more than one disk? If so, some of the below may be modified to make things easier) 1) MAKE A FULL BACKUP OF EVERYTHING. I mean it. If you screw up, you will be _very_ sorry. 2) Make _copious_ notes on your filesystem geometries. Disk geometry (real, BIOS, FreeBSD ideas), partition sizes, placements, all that jazz. Chances are, you won't need them, but you might. 3) Fire up the install floppy, and have a look at what it thinks of your partition table and disklabel. If you're in luck, it will have recognised your 2.0R setup, and all will be well. You should leave the slice editor alone (mark the FreeBSD partition as bootable, for sanity's sake), and wander into the partition editor. 4) In the partition editor, go through the list of partitions it's found in your FreeBSD slice, and nominate mount points for all of them. Mark the / and /usr partitions as 'yes' for newfsing, but none of the others. 5) Nominate an FTP install using your ethernet card (if you're working as above), and just fetch the base, manpages and compat20 distributions. Once you're up and going, you can fetch other bits as you need them. > Secondly, after I get the system up to 2.0.5R, will I have to recompile > all my utilties I made under 2.0R? Not if you install the compat20 distribution, as above. > I guess lastly, I have problems with using the lnc driver for networks. Can't help you with that one, sorry. > Chris Inacio -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Thu Jun 22 23:33:08 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id XAA24361 for questions-outgoing; Thu, 22 Jun 1995 23:33:08 -0700 Received: from hp.com (hp.com [15.255.152.4]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id XAA24355 for ; Thu, 22 Jun 1995 23:33:08 -0700 Received: from hpautobo.aus.hp.com by hp.com with ESMTP (1.37.109.16/15.5+ECS 3.3) id AA271299181; Thu, 22 Jun 1995 23:33:05 -0700 Message-Id: <199506230633.AA271299181@hp.com> Received: by hpautobo.aus.hp.com (1.37.109.16/16.2) id AA173979180; Fri, 23 Jun 1995 16:33:00 +1000 From: M C Wong Subject: difference between terminal access dial-up and SLIP/PPP dial-up To: freebsd-questions@freefall.cdrom.com (freebsd-questions@freefall.cdrom.com) Date: Fri, 23 Jun 95 16:33:00 EST Mailer: Elm [revision: 70.85] Sender: questions-owner@FreeBSD.org Precedence: bulk Hi, This may sound like a stupid question, but from what I have experienced so far, the best SLIP/PPP connection up time I can get is 2 days, but with normal termincal access dial-up, the line just seems to be never dropping at all. This makes me wonder is there any difference between normal terminal dial-up program (kermit, minicom etc) monitor line/connection and SLIP/PPP process? -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ M.C Wong Email: mcw@hpato.aus.hp.com Australian Telecom Operation Voice: +61 3 272 8058 Hewlett-Packard Australia Ltd Fax: +61 3 898 9257 31 Joseph St, Blackburn 3130, Australia OS: FreeBSD-1.1.5.1 http://hpautow.aus.hp.com:9999/~mcw/mcw.html (or http://hpautorf/~mcw) From owner-freebsd-questions Thu Jun 22 23:55:53 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id XAA25392 for questions-outgoing; Thu, 22 Jun 1995 23:55:53 -0700 Received: from virgo.ai.net (root@virgo.ai.net [198.69.44.2]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id XAA25386 for ; Thu, 22 Jun 1995 23:55:51 -0700 Received: from aries.ai.net (aries.ai.net [198.69.44.1]) by virgo.ai.net (8.6.11/8.6.12) with ESMTP id CAA00195 for ; Fri, 23 Jun 1995 02:57:04 -0400 Received: (from nc@localhost) by aries.ai.net (8.6.11/8.6.12) id CAA16612; Fri, 23 Jun 1995 02:51:25 -0400 Date: Fri, 23 Jun 1995 02:51:25 -0400 (EDT) From: Network Coordinator To: questions@freebsd.org Subject: Weird telnet sessions closing. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk For some reason I have been noticing that telnet sessions out of FreeBSD aren't as reliable for this system as they used to be. telnetting to explorer.clark.net, kaiwan.com port 25 and a few other machines connect, and then just close the connection with no text traversing. I pop over to a linux machine on the same network segment and it works like a charm. Any ideas? These are random systems and I have no reason to believe that there would be any kind of malicious or security programs blocking our connects [kaiwan.com accepts telnet login requests, just not port 25, explorer accepts port 25 but not logins all from the freebsd machine] Has anyone else experienced similar problems? Thanks, -Jerry. From owner-freebsd-questions Fri Jun 23 00:59:27 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id AAA26987 for questions-outgoing; Fri, 23 Jun 1995 00:59:27 -0700 Received: from corinna.its.utas.edu.au (corinna.its.utas.edu.au [131.217.10.51]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id AAA26981 for ; Fri, 23 Jun 1995 00:59:23 -0700 Received: from [131.217.5.21] (mg4_21.its.utas.edu.au [131.217.5.21]) by corinna.its.utas.edu.au with SMTP id RAA29520 (8.6.11/IDA-1.6 for ); Fri, 23 Jun 1995 17:59:00 +1000 X-Sender: Andrew@131.217.13.5 Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Fri, 23 Jun 1995 17:59:01 +1000 To: questions@freebsd.org From: Andrew@micksquadra.its.utas.edu.au (Andrew Stevenson) Subject: Cant install v2 Sender: questions-owner@freebsd.org Precedence: bulk Dear questions, :-) Our aim is to install FreeBSD v2 on a 486 33Mhz 8MB RAM, ~700MB disk space over two SCSI drives (adaptec controlled). We have downloaded the disk images several times (from various FTP sites) and we can boot of the disk made from boot.flp and everything goes fine. We eventually choose proceed and even later get asked to reboot from the hard drive - when we do this we get greeted by the boot manager and no matter what option is chosen it just brings up the boot manager again. We don't have a chance to feed it the cpio disk. We want to FTP the main distribution if we can get further (we have FTP access but perhaps the fact that we don't have any of the other files available to the installer is causing problems?). Thanks, Andrew Andrew@micksquadra.its.utas.edu.au -- Everyone smiles as you drift past the flowers That grow so incredibly high.... (LSDSPLHCBTB) From owner-freebsd-questions Fri Jun 23 01:32:29 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id BAA28083 for questions-outgoing; Fri, 23 Jun 1995 01:32:29 -0700 Received: from genesis.atrad.adelaide.edu.au (genesis.atrad.adelaide.edu.au [129.127.96.120]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id BAA28073 for ; Fri, 23 Jun 1995 01:32:20 -0700 Received: from msmith@localhost by genesis.atrad.adelaide.edu.au (8.6.9/8.6.9) id SAA28708; Fri, 23 Jun 1995 18:00:29 +0930 From: Michael Smith Message-Id: <199506230830.SAA28708@genesis.atrad.adelaide.edu.au> Subject: Re: Cant install v2 To: Andrew@micksquadra.its.utas.edu.au (Andrew Stevenson) Date: Fri, 23 Jun 1995 18:00:28 +0930 (CST) Cc: questions@freebsd.org In-Reply-To: from "Andrew Stevenson" at Jun 23, 95 05:59:01 pm Content-Type: text Content-Length: 1658 Sender: questions-owner@freebsd.org Precedence: bulk Andrew Stevenson stands accused of saying: > Dear questions, :-) No, you're Questions, we're Answers 8) > Our aim is to install FreeBSD v2 on a 486 33Mhz 8MB RAM, ~700MB disk space > over two SCSI drives (adaptec controlled). Not bad. Buy more RAM though 8) > We have downloaded the disk images several times (from various FTP sites) > and we can boot of the disk made from boot.flp and everything goes fine. We Ok. Stop right here. Go to Freebsd.cdrom.com/pub/FreeBSD/2.0.5-RELEASE and get floppies/boot.flp It sounds like you're trying to install 2.0R, which is out of date. > eventually choose proceed and even later get asked to reboot from the hard > drive - when we do this we get greeted by the boot manager and no matter > what option is chosen it just brings up the boot manager again. We don't > have a chance to feed it the cpio disk. This usually happens when the FreeBSD and BIOS geometries don't match, but other things can cause it. Try 2.0.5 and see what happens. > We want to FTP the main distribution if we can get further (we have FTP > access but perhaps the fact that we don't have any of the other files > available to the installer is causing problems?). The 2.0.5 installer requires nothing but the boot.flp image for FTP install. > Andrew -- ]] Mike Smith, Software Engineer msmith@atrad.adelaide.edu.au [[ ]] Genesis Software genesis@atrad.adelaide.edu.au [[ ]] High-speed data acquisition and [[ ]] realtime instrument control (ph/fax) +61-8-267-3039 [[ ]] My car has "demand start" - Terry Lambert [[ From owner-freebsd-questions Fri Jun 23 05:36:15 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id FAA04826 for questions-outgoing; Fri, 23 Jun 1995 05:36:15 -0700 Received: from obelix.hrz.tu-chemnitz.de (obelix.hrz.tu-chemnitz.de [134.109.132.55]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id FAA04815 for ; Fri, 23 Jun 1995 05:36:07 -0700 Received: from kallisto.informatik.tu-chemnitz.de by obelix.hrz.tu-chemnitz.de with Local SMTP (PP) id <00372-0@obelix.hrz.tu-chemnitz.de>; Fri, 23 Jun 1995 14:35:21 +0200 Received: by kallisto.informatik.tu-chemnitz.de (4.1/SMI-4.1) id AA04451; Fri, 23 Jun 95 14:35:18 +0200 Date: Fri, 23 Jun 1995 14:35:17 +0200 (MET DST) From: Mario Illgen To: freebsd-questions@FreeBSD.ORG Subject: tunnel device Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.ORG Precedence: bulk Hi there, is there any description about this device?? Or am I right that this is not an interface which does IP-in-IP-tunneling?? Thanks, Mario --- Mario Illgen, TU Chemnitz-Zwickau, Fakultaet fuer Informatik "It's a perfect day to throw back your head and kiss it all goodbye..." From owner-freebsd-questions Fri Jun 23 07:40:25 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA08322 for questions-outgoing; Fri, 23 Jun 1995 07:40:25 -0700 Received: from mars.csg.peachnet.edu ([168.26.193.19]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id HAA08315 for ; Fri, 23 Jun 1995 07:40:24 -0700 Received: from mercury.csg.peachnet.edu (mercury.CSG.PeachNet.EDU [168.26.193.32]) by mars.csg.peachnet.edu (8.6.9/8.6.9) with ESMTP id KAA28641 for ; Fri, 23 Jun 1995 10:27:07 -0400 Received: from CCMAIN/SpoolDir by mercury.csg.peachnet.edu (Mercury 1.21); 23 Jun 95 10:43:40 EST Received: from SpoolDir by CCMAIN (Mercury 1.21); 23 Jun 95 10:43:29 EST From: "Christian" Organization: Columbus College, Columbus, GA To: freebsd-questions@freebsd.org Date: Fri, 23 Jun 1995 10:43:27 EST MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: CCSO Phonebook server, Help! Priority: normal X-mailer: Pegasus Mail v3.22 Message-ID: <8A93F610E06@mercury.csg.peachnet.edu> Sender: questions-owner@freebsd.org Precedence: bulk Hi, I have been trying to compile the ccso phonebook server package from University of Illinois and I get a bunch of errors that I do not understand since I am no C guru. I want to provide a phonebook services through the gopher I am building. I am wondering if anyone out there has sucessfully compiled and installed this package and If so can you help me get this thing installed on my own or send me a copy of your binaries. The system is running 2.0R. I would also appreciate any other assistance you could provide in setting up this type of service through gopher and WWW. TIA ____________ Christian Plazas Columbus College, Columbus,GA 706.568.3045 ______________________________________________________________________ From owner-freebsd-questions Fri Jun 23 07:51:17 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id HAA08709 for questions-outgoing; Fri, 23 Jun 1995 07:51:17 -0700 Received: from FSL.ORST.EDU (hernanw@FSL.ORST.EDU [128.193.112.105]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id HAA08703 for ; Fri, 23 Jun 1995 07:51:16 -0700 Received: (from hernanw@localhost) by FSL.ORST.EDU (8.6.9/8.6.9) id HAA02735; Fri, 23 Jun 1995 07:51:14 -0700 Date: Fri, 23 Jun 1995 07:51:13 -0700 (PDT) From: Wayne Hernandez Subject: Changing partitions To: freebsd-questions@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk Without using sysinstall, how do I split a partition into two? I can't seem to edit the disklabel by hand, as I get a message that the interleave is wrong and that the superblock is 0. I need more room for compiling the ports. Wayne From owner-freebsd-questions Fri Jun 23 08:30:35 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA11098 for questions-outgoing; Fri, 23 Jun 1995 08:30:35 -0700 Received: from post-ofc01.srv.cis.pitt.edu (root@post-ofc01.srv.cis.pitt.edu [136.142.185.10]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id IAA11088 for ; Fri, 23 Jun 1995 08:30:33 -0700 Received: from unixd2.cis.pitt.edu (mibst14@unixd2.cis.pitt.edu [136.142.185.23]) by post-ofc01.srv.cis.pitt.edu with SMTP (8.6.10/cispo-2.0) ID for ; Fri, 23 Jun 1995 11:28:47 -0400 Date: Fri, 23 Jun 1995 11:28:47 -0400 (EDT) From: Michael Balaga Subject: Free BSD CD To: questions@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk I have a non SCSI CD drive in my PC. If I purchase the CD, using the boot disks, can I install FreeBSD from it or add additional features such as X-Windows? Maybe by copying the FreeBSD programs to my hard drive? I will look forward to your reply. Michael From owner-freebsd-questions Fri Jun 23 08:42:08 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id IAA11954 for questions-outgoing; Fri, 23 Jun 1995 08:42:08 -0700 Received: from grendel.csc.smith.edu (grendel.csc.smith.edu [131.229.222.23]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id IAA11938 for ; Fri, 23 Jun 1995 08:42:05 -0700 Received: from localhost (jfieber@localhost) by grendel.csc.smith.edu (8.6.5/8.6.5) id LAA13667; Fri, 23 Jun 1995 11:43:38 -0400 From: jfieber@cs.smith.edu (John Fieber) Message-Id: <199506231543.LAA13667@grendel.csc.smith.edu> Subject: Re: Free BSD CD To: mibst14+@pitt.edu (Michael Balaga) Date: Fri, 23 Jun 1995 11:43:37 -0400 (EDT) Cc: questions@freebsd.org In-Reply-To: from "Michael Balaga" at Jun 23, 95 11:28:47 am Content-Type: text Content-Length: 780 Sender: questions-owner@freebsd.org Precedence: bulk Michael Balaga writes: > I have a non SCSI CD drive in my PC. If I purchase the CD, using the > boot disks, can I install FreeBSD from it or add additional features > such as X-Windows? Maybe by copying the FreeBSD programs to my > hard drive? You can download the installation disk image (see ftp://ftp.freebsd.org/pub/FreeBSD/) put it on a floppy using the MS-DOS rawrite (also available via ftp), and then boot from it. If you watch the carefully while booting from the floppy, you can tell if FreeBSD finds your CD drive. All is not lost if the CD drive cannot be used directly by FreeBSD. You can copy the parts you want to install to an MS-DOS partition which FreeBSD can install from. -john === jfieber@cs.smith.edu ========== Come up and be a kite! --K. Bush === From owner-freebsd-questions Fri Jun 23 09:19:33 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA14067 for questions-outgoing; Fri, 23 Jun 1995 09:19:33 -0700 Received: from copper.cmp.com (copper.cmp.com [198.80.26.247]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id JAA14057 for ; Fri, 23 Jun 1995 09:19:31 -0700 Received: from mailgate.cmp.com ([198.80.26.7]) by copper.cmp.com with SMTP (1.37.109.14/16.2) id AA161064235; Fri, 23 Jun 1995 12:17:15 -0400 Received: by mailgate.cmp.com with Microsoft Mail id <2FEB13A7@mailgate.cmp.com>; Fri, 23 Jun 95 12:19:03 PDT From: Plyaskin Sergey To: "' freebsd-questions@freebsd.org'" Subject: How to delete a package? Date: Fri, 23 Jun 95 12:16:00 PDT Message-Id: <2FEB13A7@mailgate.cmp.com> Encoding: 14 TEXT X-Mailer: Microsoft Mail V3.0 Sender: questions-owner@freebsd.org Precedence: bulk Hi folks, I tried to install CERN httpd package on my 950412 system. Something went wrong, and it wasn't installed correctly. Now, if I try to install it again with pkg_add script, it gives me the error "Package `cern_httpd-3.0' already recorded as installed." However, if I try to delete the package with pkg_delete, it says there's no such a package installed. What should I do? How can I edit the registry (or whatever it's called in FreeBSD) manually to clear that entry? TIA. Serge splyaski@cmp.com From owner-freebsd-questions Fri Jun 23 09:46:22 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id JAA15770 for questions-outgoing; Fri, 23 Jun 1995 09:46:22 -0700 Received: from mars.csg.peachnet.edu ([168.26.193.19]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id JAA15764 for ; Fri, 23 Jun 1995 09:46:19 -0700 Received: from mercury.csg.peachnet.edu (mercury.CSG.PeachNet.EDU [168.26.193.32]) by mars.csg.peachnet.edu (8.6.9/8.6.9) with ESMTP id MAA28863 for ; Fri, 23 Jun 1995 12:32:54 -0400 Received: from CCMAIN/SpoolDir by mercury.csg.peachnet.edu (Mercury 1.21); 23 Jun 95 12:49:35 EST Received: from SpoolDir by CCMAIN (Mercury 1.21); 23 Jun 95 12:49:17 EST From: "Christian" Organization: Columbus College, Columbus, GA To: questions@freebsd.org Date: Fri, 23 Jun 1995 12:49:15 EST MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: FreeBSD & Mbone...a few questions Priority: normal X-mailer: Pegasus Mail v3.22 Message-ID: <8AB582E4940@mercury.csg.peachnet.edu> Sender: questions-owner@freebsd.org Precedence: bulk Hi, I am wondering where I can find more information regarding using FreeBSD for Mbone applications, such as using it as an mrouter and if there are any video and audio tools that have been ported to FreeBSD. I would prefer something like a How-To document that can tell me everything that needs to be done to a FreeBSD machine for Mbone use, such as if I need to recompile the kernel and how to configure it if it does. TIA ____________ Christian Plazas Columbus College, Columbus,GA 706.568.3045 ______________________________________________________________________ From owner-freebsd-questions Fri Jun 23 10:45:33 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id KAA18467 for questions-outgoing; Fri, 23 Jun 1995 10:45:33 -0700 Received: from mars.csg.peachnet.edu ([168.26.193.19]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id KAA18458 for ; Fri, 23 Jun 1995 10:45:31 -0700 Received: from mercury.csg.peachnet.edu (mercury.CSG.PeachNet.EDU [168.26.193.32]) by mars.csg.peachnet.edu (8.6.9/8.6.9) with ESMTP id NAA28954 for ; Fri, 23 Jun 1995 13:32:10 -0400 Received: from CCMAIN/SpoolDir by mercury.csg.peachnet.edu (Mercury 1.21); 23 Jun 95 13:48:47 EST Received: from SpoolDir by CCMAIN (Mercury 1.21); 23 Jun 95 13:48:35 EST From: "Christian" Organization: Columbus College, Columbus, GA To: questions@freebsd.org Date: Fri, 23 Jun 1995 13:48:30 EST MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Audio through speaker??? Priority: normal X-mailer: Pegasus Mail v3.22 Message-ID: <8AC55303F0A@mercury.csg.peachnet.edu> Sender: questions-owner@freebsd.org Precedence: bulk Hi, I remember reading a while back that .au files could be played through the pc speaker by doing a cat somefile.au > /dev/audio. I tried this and I get a message saying "device not configured" and when I try to do cat somefile.au > /dev/speaker I get a "permission denied" message. I tried to find info about configuring /dev/audio but could not find anything. Do I need another program to be able to do this? Can somebody out there please tell me how to configure the /dev/audio device? TIA____________ Christian Plazas Columbus College, Columbus,GA 706.568.3045 ______________________________________________________________________ From owner-freebsd-questions Fri Jun 23 11:02:37 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id LAA19735 for questions-outgoing; Fri, 23 Jun 1995 11:02:37 -0700 Received: from campino.informatik.rwth-aachen.de (campino.Informatik.RWTH-Aachen.DE [137.226.225.2]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id LAA19729 for ; Fri, 23 Jun 1995 11:02:32 -0700 Received: from gilberto.physik.rwth-aachen.de by campino.informatik.rwth-aachen.de (4.1/campino-7) id AA13545; Fri, 23 Jun 95 20:02:28 +0200 Received: (from kuku@localhost) by gilberto.physik.rwth-aachen.de (8.6.8/8.6.9) id UAA24470; Fri, 23 Jun 1995 20:14:17 +0200 Message-Id: <199506231814.UAA24470@gilberto.physik.rwth-aachen.de> Subject: Re: Audio through speaker??? To: PLAZAS_CHRISTIAN@mercury.csg.peachnet.edu (Christian) Date: Fri, 23 Jun 1995 20:14:17 +0200 (MET DST) Cc: questions@freebsd.org In-Reply-To: <8AC55303F0A@mercury.csg.peachnet.edu> from "Christian" at Jun 23, 95 01:48:30 pm From: Christoph Kukulies Reply-To: Christoph Kukulies X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 1118 Sender: questions-owner@freebsd.org Precedence: bulk > > Hi, > > I remember reading a while back that .au files could be played > through the pc speaker by doing a cat somefile.au > /dev/audio. I > tried this and I get a message saying "device not configured" and > when I try to do cat somefile.au > /dev/speaker I get a "permission > denied" message. I tried to find info about configuring /dev/audio > but could not find anything. Do I need another program to be able to > do this? Can somebody out there please tell me how to configure the > /dev/audio device? Build a new kernel containing device pca0 at isa? tty pseudo-device speaker Then cat file.au >/dev/pcaudio > > TIA____________ > > Christian Plazas > Columbus College, Columbus,GA > 706.568.3045 > ______________________________________________________________________ > --Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de FreeBSD blues.physik.rwth-aachen.de 2.0-BUILT-19950619 FreeBSD 2.0-BUILT-1995 0619 #1: Mon Jun 19 19:54:08 MET DST 1995 kuku@blues.physik.rwth-aachen.d e:/usr/src/sys/compile/BLUESGUS i386 From owner-freebsd-questions Fri Jun 23 11:50:49 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id LAA22269 for questions-outgoing; Fri, 23 Jun 1995 11:50:49 -0700 Received: from dialup.oar.net (dialup.oar.net [131.187.1.130]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id LAA22262 for ; Fri, 23 Jun 1995 11:50:47 -0700 Received: from bellhow.com for tkm@bellhow.com by dialup.oar.net (8.6.10/931123.1402) id OAA24562; Fri, 23 Jun 1995 14:49:55 -0400 Received: from sygate.bellhow.com by bellhow.com (4.1/SMI-4.1) id AA08240; Fri, 23 Jun 95 14:49:52 EDT From: tkm@bellhow.com (Ted Milbaugh) Message-Id: <9506231849.AA08240@bellhow.com> Subject: netatalk To: freebsd-questions@freebsd.org Date: Fri, 23 Jun 1995 14:49:51 -0400 (EDT) X-Mailer: ELM [version 2.4 PL23] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 287 Sender: questions-owner@freebsd.org Precedence: bulk hi: I am searching for information regarding netatalk & FreeBSD. I have gotten the sources for the latest version. Am I going to be able to compile this for FreeBSD? Does anyone use netatalk with FreeBSD? Any help/pointers would be appreciated. /* ** Ted Milbaugh, tkm@bellhow.com */ From owner-freebsd-questions Fri Jun 23 12:42:39 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id MAA23361 for questions-outgoing; Fri, 23 Jun 1995 12:42:39 -0700 Received: from ecc.nyseg.com (ecc.nyseg.com [199.98.200.2]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id MAA23354 for ; Fri, 23 Jun 1995 12:42:38 -0700 Date: Fri, 23 Jun 1995 12:42:38 -0700 From: vartuli@ecc.nyseg.com Message-Id: <199506231942.MAA23354@freefall.cdrom.com> To: questions@FreeBSD.org Subject: FreeBSD and AHA2940 Content-Length: 213 Content-Type: text Sender: questions-owner@FreeBSD.org Precedence: bulk To whom it may concern: I have a P5-90 with Adaptec's 2940 SCSI HBA as its primary disk controller. If I get FreeBSD will I be able to use this configuration with the standard distribution? Thanks - Dave V. From owner-freebsd-questions Fri Jun 23 14:31:33 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA26464 for questions-outgoing; Fri, 23 Jun 1995 14:31:33 -0700 Received: from localhost.cdrom.com (localhost.cdrom.com [127.0.0.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id OAA26454 ; Fri, 23 Jun 1995 14:31:31 -0700 Message-Id: <199506232131.OAA26454@freefall.cdrom.com> X-Authentication-Warning: freefall.cdrom.com: Host localhost.cdrom.com didn't use HELO protocol To: vartuli@ecc.nyseg.com cc: questions@freebsd.org Subject: Re: FreeBSD and AHA2940 In-reply-to: Your message of "Fri, 23 Jun 95 12:42:38 PDT." <199506231942.MAA23354@freefall.cdrom.com> Date: Fri, 23 Jun 1995 14:31:31 -0700 From: "Justin T. Gibbs" Sender: questions-owner@freebsd.org Precedence: bulk >To whom it may concern: > > I have a P5-90 with Adaptec's 2940 SCSI HBA as its primary >disk controller. If I get FreeBSD will I be able to use this >configuration with the standard distribution? > >Thanks - > >Dave V. You should be fine using 2.0.5R. -- Justin T. Gibbs =========================================== Software Developer - Walnut Creek CDROM FreeBSD: Turning PCs into workstations =========================================== From owner-freebsd-questions Fri Jun 23 15:35:58 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA28990 for questions-outgoing; Fri, 23 Jun 1995 15:35:58 -0700 Received: from sirius.brunel.ac.uk (root@sirius.brunel.ac.uk [134.83.128.62]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id PAA28983 for ; Fri, 23 Jun 1995 15:35:56 -0700 Received: from ccws-20.brunel.ac.uk by sirius.brunel.ac.uk with SMTP (PP) id <06342-0@sirius.brunel.ac.uk>; Fri, 23 Jun 1995 23:35:47 +0100 From: Nik Clayton Message-Id: <4170.9506232235@ccws-20.brunel.ac.uk> Subject: Setting up partitions To: questions@freebsd.org Date: Fri, 23 Jun 1995 23:35:43 +0100 (BST) X-Mailer: ELM [version 2.4 PL21] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1256 Sender: questions-owner@freebsd.org Precedence: bulk Apologies if this is considered a generic Unix question, but: I'm about (in the next week or so) to set up a FreeBSD box. A Pentium with 16Mb RAM and initially 1Gb of SCSI HD. It's going to be running (at the moment) as low loaded HTTP/FTP/GOPHER server, supporting about 30 users (although only ever 2 or 3 at any one time). However, within the next four months it should become a major WWW server, needing to support upwards of 10,000 hits a day. At this point i'll be upgrading the memory to at least 32Mb, and probably adding extra disk partitions. Has anyone got any pointers to a 'good' partitioning scheme for this? I was planning on roughly 25Mb for '/', at least 64Mb for 'swap', 150Mb for '/home' and the rest for '/usr' (maybe subdividing '/usr' and '/usr/src' into two seperate partitions. How easy is it to change the slice information once a disk has got info on it? If, say, I wanted to increase the swap space from 64 to 128? Or do I have to back everything up, re-slice and then restore? Cheers for any assistance, N =-[Opinion, n: See the above text for an example]=-=[Kibo #: e]-[RYRYRY]=-= =-[The Silly Sod Society: To perfect and to swerve]=-[beable]-=[TP U BG]=-= Perfect day for scrubbing the floor and other exciting things. From owner-freebsd-questions Fri Jun 23 15:51:51 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA29836 for questions-outgoing; Fri, 23 Jun 1995 15:51:51 -0700 Received: from netcomsv.netcom.com (uucp5.netcom.com [163.179.3.5]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id PAA29827 for ; Fri, 23 Jun 1995 15:51:49 -0700 Received: from newgen.UUCP by netcomsv.netcom.com with UUCP (8.6.12/SMI-4.1) id PAA28213; Fri, 23 Jun 1995 15:44:17 -0700 Received: from supergen.verilog by newgen.nexgen.com (4.1/SMI-4.1) id AA22865; Fri, 23 Jun 95 14:09:07 PDT Date: Fri, 23 Jun 95 14:09:06 PDT From: jay@nexgen.com (Jay Hiremath) Message-Id: <9506232109.AA22865@newgen.nexgen.com> To: questions@freebsd.org Subject: FreeBSD 2.0 Cc: jay@nexgen.com Sender: questions-owner@freebsd.org Precedence: bulk Does the installation of FreeBSD 2.0 look for a co-processor? I am interestes in the installation of XFree86. Does this need a co-processor? Are there any known problems in installing this part? Your reply would be greatly appreciated. Thanks Jay From owner-freebsd-questions Fri Jun 23 16:48:49 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id QAA01030 for questions-outgoing; Fri, 23 Jun 1995 16:48:49 -0700 Received: from mailbox.syr.edu (mailbox.syr.EDU [128.230.1.5]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id QAA01024 for ; Fri, 23 Jun 1995 16:48:48 -0700 Received: from sudial-110.syr.EDU by mailbox.syr.edu (8.6.9/SUM-V8-1.0) id TAA09241; Fri, 23 Jun 1995 19:48:55 -0400 Message-Id: <199506232348.TAA09241@mailbox.syr.edu> To: questions@freebsd.org Subject: Re: fatal signal 11 In-reply-to: Your message of "Wed, 21 Jun 95 15:47:50 BST." <9506211447.AA10641@btp1x5> Date: Fri, 23 Jun 1995 19:43:09 -0400 From: "Mark G.M. O'Lear" Sender: questions-owner@freebsd.org Precedence: bulk > Hi, > > I have in FreeBSD-2.0.5-ALPHA from time to time this compiler error: > "cc: Internal compiler error: program cc1 got fatal signal 11" > After a reboot the same source compiles without any errors or warnings ! > > Is there anybody, who know the reason ? > > Werner I had the same thing happen to me on 2.0R. I would get random signal 11's (and maybe 10's) on random files in random locations at random times with cc. I finally found that I had a faulty SIMM. Once I replaced the SIMM no more problems. Also, I forget how I found out that it was a faulty SIMM (FreeBSD didn't tell me), maybe it was himem.sys in DOS. Mark From owner-freebsd-questions Fri Jun 23 18:29:41 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id SAA02988 for questions-outgoing; Fri, 23 Jun 1995 18:29:41 -0700 Received: from easynet.com (easy1.easynet.com [199.2.26.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id SAA02981 for ; Fri, 23 Jun 1995 18:29:39 -0700 Received: by easynet.com (Smail3.1.28.1 #7) id m0sPK2c-000re8C; Fri, 23 Jun 95 18:29 WET DST Message-Id: From: brian@MediaCity.com (Brian Litzinger) Subject: help with Taylor UUCP To: freebsd-questions@freebsd.org Date: Fri, 23 Jun 1995 18:29:45 -0700 (PDT) X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 1448 Sender: questions-owner@freebsd.org Precedence: bulk I've never used Taylor UUCP however I've used HDB quite extensively. It seems to me that things aren't working here, and with HDB I'd just modify the chat script, but I don't seem to be able to determine which config file holds the chat script. Could some kind soul, point me in the right direction? brian uucico hot1 - (1995-06-24 01:14:50.50 392) DEBUG: icexpect: Looking for 7 "CONN ECT" uucico hot1 - (1995-06-24 01:14:50.50 392) DEBUG: icexpect: Got "\r\nATDT1900976WETT\r\r\nCARRIER 21600\r\n\r\nCONNECT" (found it) uucico hot1 - (1995-06-24 01:15:07.77 392) DEBUG: fcsend: Writing pause uucico hot1 - (1995-06-24 01:15:08.28 392) DEBUG: fcsend: Writing "\r" uucico hot1 - (1995-06-24 01:15:08.28 392) DEBUG: icexpect: Looking for 5 "ogin :" uucico hot1 - (1995-06-24 01:15:08.28 392) DEBUG: icexpect: Got " 21600/REL\r\n \r\r\n\r\r\nBSD/OS 1.1 (hot.bigsystem.com) (ttyi5)\r\r\n\r" uucico hot1 - (1995-06-24 01:15:08.29 392) DEBUG: icexpect: Got "\r\nlogin:" (f ound it) uucico hot1 - (1995-06-24 01:15:08.30 392) DEBUG: fcsend: Writing login "lioness\r" uucico hot1 - (1995-06-24 01:15:08.30 392) DEBUG: icexpect: Looking for 5 "word :" uucico hot1 - (1995-06-24 01:15:08.30 392) DEBUG: icexpect: Got " \r\r\n\r\r\n\ r\r\nBSD/OS 1.1 (hot1.bigsystem.com) (ttyi5)\r\r\n\r\r\nlogin:" uucico hot1 - (1995-06-24 01:15:08.67 392) DEBUG: icexpect: Got " " (timed out) uucico hot1 - (1995-06-24 01:16:03.68 392) ERROR: Timed out in chat script From owner-freebsd-questions Fri Jun 23 18:33:48 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id SAA03102 for questions-outgoing; Fri, 23 Jun 1995 18:33:48 -0700 Received: from netris1 (corpcomm.net [199.165.217.101]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id SAA03096 for ; Fri, 23 Jun 1995 18:33:46 -0700 Received: from fgo1-a3.corpcomm.net by netris1 (5.x/SMI-SVR4) id AA23614; Fri, 23 Jun 1995 20:30:43 -0500 Date: Fri, 23 Jun 1995 20:30:42 -0500 Message-Id: <9506240130.AA23614@netris1> X-Sender: sheeme@CorpComm.NET X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: questions@FreeBSD.org From: sheeme@corpcomm.net (Steve Heemeyer) Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives Sender: questions-owner@FreeBSD.org Precedence: bulk > >>Greetings - >>I sent e-mail on this problem to Justin, the author of the AIC7xxx >>driver. He suggested I post my problems to this list: >> >>I've been running an Adaptec 1542B controller under FBSD 2.0 in a 486/50 >>EISA/VESA system for some time. I've never had a problem with my Archive >>Viper QIC150 and Exabyte 8200 tape drives before. Last week, I got an >>Adaptec 2742AT EISA dual-channel SCSI card, and have been unable to use >>either tape drive since. >> >>Thinking that the new and improved 274x driver code in v2.0.5R might >>solve the problem, I tried installing the new OS. The QIC150 tape install >>failed with the same error I get under 2.0R whenever I try to access the >>Archive Viper QIC150 drive. >> >>DEBUG: Notify: Attempting to extract from SCSI tape drive... >>DEBUG: Executing command 'cpio -iBduVm -H tar -I /dev/rst0' (Magic 0) >>st0(ahc1:2:0): ILLEGAL REQUEST >>st0: Cannot set selected mode >>st0: bad request, must be between 0 and 0 >>cpio: read error: Input/output error >>DEBUG: Command 'cpio -iBduVm -H tar -I /dev/rst0' returns status of 1 > >How was the Q150 tape made and what block size did you use? The >tape install failed for me on a HP 1533C DAT tape drive when I >made the tape with the default block size (for tar) of 20*512 bytes. >When I remade the tape with a blocking factor of 1, it worked. >I got an illegal block size message on the failed attempt, so >that's probably not your problem - I'm just throwing it out there. > I am seeing a similar problem on an Ultrastor 34f controller and a Tandberg 3800 tape drive. Jun 20 23:01:02 Fridmani /kernel: st0(uha0:6:0): ILLEGAL REQUEST \ csi:10,8,0,0 asc:24,0 Invalid field in CDB field replaceable unit: 2 Jun 20 23:01:02 Fridmani /kernel: st0: Cannot set selected mode the tape drive appears to probe fine when booting, however any attempt to access the drive results in the above error. One quick note, the tape drive worked successfully until I upgraded to 2.0.5A via a fresh install. [stuff deleted] >>Any help or comments are much appreciated... >>- Mike >>-- >>-------------------------------------------------------------------------- >>Michael Borowiec Network Operations Tellabs Operations, Inc. >>mikebo@TELLABS.COM 1000 Remington Blvd. MS109 >>708-378-6007 FAX: 708-378-6714 Bolingbrook, IL, USA 60440 >>-------------------------------------------------------------------------- > >Dan Eischen >deischen@iworks.InterWorks.org > Steve Heemeyer sheeme@CorpComm.NET From owner-freebsd-questions Fri Jun 23 19:35:46 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id TAA04467 for questions-outgoing; Fri, 23 Jun 1995 19:35:46 -0700 Received: from orion.stars.sed.monmouth.army.mil ([158.9.11.65]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id TAA04460 ; Fri, 23 Jun 1995 19:35:42 -0700 Message-Id: <199506240235.TAA04460@freefall.cdrom.com> Received: by orion.stars.sed.monmouth.army.mil (1.37.109.16/16.2) id AA005371422; Fri, 23 Jun 1995 22:37:02 -0400 Subject: Old 1.1.5.1 ppp problem To: FreeBSD-hackers@freebsd.org (FreeBSD-hackers), freebsd-questions@freebsd.org Date: Fri, 23 Jun 1995 22:37:01 -0400 (EDT) From: "William Pechter ILEX Systems" Reply-To: pechter@sesd.ilex.com X-Mailer: ELM [version 2.5 PL0a3] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1040 Sender: questions-owner@freebsd.org Precedence: bulk I finally got the house a dial-up net connection with PPP. I seem to be having one major problem. My modem drops the line on the transition between kermit and pppd (or just after pppd starts). I used the info from the web site to get the dialer scripts and info up. Any tips. (I'm getting the addresses dynamically set via ppp... I've got a local ethernet with a class C here.) So far I've been using OS/2 to connect in until the FreeBSD box is up. Does the bidir comm port come into play here. I tried with and without the getty established and using the cuaxx and ttyxx device. I'm running a Telebit T2500 to a v34 modem on the other side. The Telebit's got the final T2500 rom set and has been very stable to everything else (since these roms). Bill ----------------------------------------------------------------------------- Bill Pechter |Systems Administrator | N2RDI Ilex Systems |170 Patterson Ave | Shrewsbury, New Jersey 07702 908-532-2369 |pechter@sesd.ilex.com | pechter@stars.sed.monmouth.army.mil From owner-freebsd-questions Fri Jun 23 20:07:00 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id UAA05470 for questions-outgoing; Fri, 23 Jun 1995 20:07:00 -0700 Received: from specgw.spec.co.jp (specgw.spec.co.jp [202.32.13.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id UAA05462 for ; Fri, 23 Jun 1995 20:06:52 -0700 Received: from localhost (uucp@localhost) by specgw.spec.co.jp (8.6.5/3.3Wb-SPEC) with UUCP id LAA17687; Sat, 24 Jun 1995 11:55:07 +0900 Received: by tama.spec.co.jp (8.6.11/6.4J.5) id AAA00885; Thu, 22 Jun 1995 00:57:27 +0900 From: Atsushi Murai Message-Id: <199506211557.AAA00885@tama.spec.co.jp> Subject: Re: ppp in auto mode question To: wolperte@knox.pcec.philips.com (ED WOLPERT) Date: Thu, 22 Jun 1995 00:57:26 +0900 (JST) Cc: questions@freebsd.org In-Reply-To: <9506211330.AA17439@eis16.philips.com> from "ED WOLPERT" at Jun 21, 95 09:30:39 am Reply-To: amurai@spec.co.jp X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 1580 Sender: questions-owner@freebsd.org Precedence: bulk > If a user (not root) logs in, before ppp (that started at boot time, > from the rc.local as 'ppp -auto connect') ever made a connection, it > does not try to make a connection, and only will if the user tries to > connect (ping, finger) the main router that the ppp program knows > about. If the ppp program had made and, after a timeout period, > dropped the connection... the next time a shell is started by a user, > it automatically will try to connect to the host... even though no > network connection is being attempted by the user. Has anyone seen > this? It does not occur for root, and the .cshrc files are the same > as the one created from the adduser command, except the SHELL is > changed to tcsh (from csh). Ideas? I might miss-understaing your question... But I'll try.. First of all with Dial on demand mode. Even though you drop the line by time out, Higher level link (i.e. TCP) is still up untile a higher level is timeouted. Another word, you did rlogin to peer and then line is dropped by timeout period, but whenever you type a "A", ppp try to dial up again and then echo back will be occured instead of login prompt. But I still don't understand why root and csh is not ocuured this... Why don't you enable bpf and snoop a packet by "tcpdump -i tun0" it's might be give me a hint. > -- > Virtually, > Edward Wolpert Atsushi. -- Atsushi Murai Internet: amurai@spec.co.jp System Planning and Engineering Co,.Ltd. Voice : +81-33833-5341 From owner-freebsd-questions Fri Jun 23 20:07:03 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id UAA05484 for questions-outgoing; Fri, 23 Jun 1995 20:07:03 -0700 Received: from specgw.spec.co.jp (specgw.spec.co.jp [202.32.13.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id UAA05469 for ; Fri, 23 Jun 1995 20:07:00 -0700 Received: from localhost (uucp@localhost) by specgw.spec.co.jp (8.6.5/3.3Wb-SPEC) with UUCP id LAA17674; Sat, 24 Jun 1995 11:55:03 +0901 Received: by tama.spec.co.jp (8.6.11/6.4J.5) id AAA00781; Thu, 22 Jun 1995 00:33:49 +0900 From: Atsushi Murai Message-Id: <199506211533.AAA00781@tama.spec.co.jp> Subject: Re: Conner 1.05 GB Wide no work To: amurai@spec.co.jp (Atsushi Murai) Date: Thu, 22 Jun 1995 00:33:49 +0900 (JST) Cc: brian@MediaCity.com, freebsd-questions@freebsd.org In-Reply-To: <9506211212.AA00064@tama3.spec.co.jp.spec.co.jp> from "Atsushi Murai" at Jun 21, 95 09:12:44 pm Reply-To: amurai@spec.co.jp X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 815 Sender: questions-owner@freebsd.org Precedence: bulk > :I tried turning off disconnection, sync, and wide negotitation and > :the problem seemed to get worse. > > Check the firmware version, Because old firmware of conner has > fatal bug in their cahce architecutre - 256K Bytes write/read by > one issue a scsi command it's messed up their cache. It's never > occure on dos enviroment. Addition I couldn't point out the version > but you may try to check conner's bbs and get firmware upgaration. OK. Here is a supplement my mail as follows. Suspect version: 9WA1.62, 9WA1.66, 9WA1.68 (On label sheet) Update Firmware: barunix.exe Place : Conner Tech Support BBSD 408-456-4415 Atsushi. -- Atsushi Murai Internet: amurai@spec.co.jp System Planning and Engineering Co,.Ltd. Voice : +81-33833-5341 From owner-freebsd-questions Fri Jun 23 20:16:04 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id UAA05868 for questions-outgoing; Fri, 23 Jun 1995 20:16:04 -0700 Received: from easynet.com (easy1.easynet.com [199.2.26.10]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id UAA05862 for ; Fri, 23 Jun 1995 20:16:02 -0700 Received: by easynet.com (Smail3.1.28.1 #7) id m0sPLhZ-000reCC; Fri, 23 Jun 95 20:16 WET DST Message-Id: From: brian@MediaCity.com (Brian Litzinger) Subject: rsh and connection refused To: freebsd-questions@freebsd.org Date: Fri, 23 Jun 1995 20:16:09 -0700 (PDT) X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 767 Sender: questions-owner@freebsd.org Precedence: bulk I have two FreeBSD 2.0.5R systems, connected via a dedicated T1, acting as a server and a client. On the client I have a menu that does various things. One of the menu items does a rsh -n theserver cat /etc/data | display_the_data_locally If I select this from the menu, all goes well. If I quickly select it again, it pauses and after what seems like a minute the message 'connection refused' appears on the console. Another attempt brings on the same message after another minute. Yet another attempt and it works correctly. It seems that after doing one the above rsh's I have to wait 20 to 120 seconds before I can do one again. Any idea what is going on? I have two different client/server pairs doing this. Thanks, Brian Litzinger brian@easynet.com From owner-freebsd-questions Fri Jun 23 21:42:21 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id VAA09144 for questions-outgoing; Fri, 23 Jun 1995 21:42:21 -0700 Received: from csc.canberra.edu.au (csc.canberra.edu.au [137.92.1.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id VAA09106 for ; Fri, 23 Jun 1995 21:42:00 -0700 Received: from student.canberra.edu.au by csc.canberra.edu.au (5.65/1.35) id AA05431; Sat, 24 Jun 95 14:40:23 +1000 Received: by student.canberra.edu.au (5.x/SMI-SVR4) id AA06455; Sat, 24 Jun 1995 14:40:20 +1000 Date: Sat, 24 Jun 1995 14:40:20 +1000 (EST) From: "Gasparovski / Daniel (ISE)" To: questions@freebsd.org Subject: CODEC Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk Greetings, Has anyone had success with CODEC? When I try to run it, I get: # ./READ321.EXE zsh: bad address: ../READ321.EXE # ldd ./READ321.EXE ./READ321.EXE: ./READ321.EXE: Bad address ./READ321.EXE: exit status 1 This is for a FreeBSD 2.0 executable on FreeBSD 2.0.5 (beta I beleive) with the 2.0 compatdist installed. Same thing happens for NetBSD executables. CODEC is a compression utility. An announcment for it appeared on one of the lists a few weeks ago. It's available at: http://vm.cineca.it:1290/telvox_swshop/seefbsd/ and is only released in binary form. Dan ... From owner-freebsd-questions Fri Jun 23 22:00:06 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id WAA10521 for questions-outgoing; Fri, 23 Jun 1995 22:00:06 -0700 Received: from csc.canberra.edu.au (csc.canberra.edu.au [137.92.1.1]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id VAA10498 for ; Fri, 23 Jun 1995 21:59:55 -0700 Received: from student.canberra.edu.au by csc.canberra.edu.au (5.65/1.35) id AA05705; Sat, 24 Jun 95 14:58:25 +1000 Received: by student.canberra.edu.au (5.x/SMI-SVR4) id AA07333; Sat, 24 Jun 1995 14:58:22 +1000 Date: Sat, 24 Jun 1995 14:58:22 +1000 (EST) From: "Gasparovski / Daniel (ISE)" To: questions@freebsd.org Subject: re codec Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@freebsd.org Precedence: bulk *sigh* Ignore my previous message. The problem was the transfer would stop prematurely. After 5 attempts (each one a different size) I managed to finally get the whole thing. Dan ... From owner-freebsd-questions Sat Jun 24 06:27:03 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA08259 for questions-outgoing; Sat, 24 Jun 1995 06:27:03 -0700 Received: from psi.wsl.sinica.edu.tw (psi.wsl.sinica.edu.tw [140.109.7.34]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id GAA08252 for ; Sat, 24 Jun 1995 06:27:01 -0700 Received: (from ywliu@localhost) by psi.wsl.sinica.edu.tw (8.6.9/8.6.9) id FAA26931 for questions@freebsd.org; Sun, 25 Jun 1995 05:33:03 GMT From: Yen-Wei Liu Message-Id: <199506250533.FAA26931@psi.wsl.sinica.edu.tw> Subject: User accounting programs in FreeBSD To: questions@freebsd.org Date: Sun, 25 Jun 1995 05:33:03 +0000 () X-Mailer: ELM [version 2.4 PL24] Content-Type: text Content-Length: 217 Sender: questions-owner@freebsd.org Precedence: bulk Hi, I am planning to use FreeBSD as a commercial PPP/SLIP provider system. I just wonder if there is any user accounting program to log user connection time, etc. so I can charge users accordingly ? --- Yen-Wei Liu From owner-freebsd-questions Sat Jun 24 06:55:42 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA08773 for questions-outgoing; Sat, 24 Jun 1995 06:55:42 -0700 Received: from mail04.mail.aol.com (mail04.mail.aol.com [152.163.172.53]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id GAA08767 for ; Sat, 24 Jun 1995 06:55:39 -0700 From: Halfstone@aol.com Received: by mail04.mail.aol.com (1.37.109.11/16.2) id AA091762107; Sat, 24 Jun 1995 09:55:07 -0400 Date: Sat, 24 Jun 1995 09:55:07 -0400 Message-Id: <950624095505_77331209@aol.com> To: questions@freebsd.org Subject: unable to mount cd0a Sender: questions-owner@freebsd.org Precedence: bulk I'm having a problem installing freeBSD 2.0. I've managed to partition my drive, assign the / and /usr partitions and install the boot manager and boot from the hard drive. When I go to install the rest of the software from the cd I get an error message - "unable to mount cd0a". I've booted using kernel -c, and tried many variations of configuring my CDROM, but none seem to work. I have a TEAC SCSI cdrom controlled by a Future Domain 950 series controller. I understand that this controller is recognized as the sea0 controller, but when I configure that one (to iomem ca000, irq5, port 330) my boot message is "sea0 not found". I dropped into a shell and looked in the /dev directory, and the only cd devices I can see are the mitsumi - mcd0 and mcd1. I don't even see a cd0a or cd1a. I don't have enough uncompressed hard drive space to copy to a hard drive and mount from there, though I can mount my floppy drive fairly easily. Am I missing the correct drivers? Can you help me? tx. David From owner-freebsd-questions Sat Jun 24 18:58:06 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id SAA03521 for questions-outgoing; Sat, 24 Jun 1995 18:58:06 -0700 Received: from kryten.atinc.com (kryten.atinc.com [198.138.38.7]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id SAA03515 for ; Sat, 24 Jun 1995 18:58:03 -0700 Received: (jmb@localhost) by kryten.atinc.com (8.6.9/8.3) id VAA15359; Sat, 24 Jun 1995 21:50:30 -0400 Date: Sat, 24 Jun 1995 21:50:29 -0400 (EDT) From: "Jonathan M. Bresler" Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives To: Steve Heemeyer cc: questions@FreeBSD.org In-Reply-To: <9506240130.AA23614@netris1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: questions-owner@FreeBSD.org Precedence: bulk note some heavy choppin of previous mail messages > >>Archive Viper QIC150 drive. > >> > >>DEBUG: Notify: Attempting to extract from SCSI tape drive... > >>DEBUG: Executing command 'cpio -iBduVm -H tar -I /dev/rst0' (Magic 0) > >>st0(ahc1:2:0): ILLEGAL REQUEST > >>st0: Cannot set selected mode > >>st0: bad request, must be between 0 and 0 > >>cpio: read error: Input/output error > >>DEBUG: Command 'cpio -iBduVm -H tar -I /dev/rst0' returns status of 1 > I am seeing a similar problem on an Ultrastor 34f controller and a Tandberg > 3800 tape drive. > > Jun 20 23:01:02 Fridmani /kernel: st0(uha0:6:0): ILLEGAL REQUEST \ > csi:10,8,0,0 asc:24,0 Invalid field in CDB field replaceable unit: 2 > Jun 20 23:01:02 Fridmani /kernel: st0: Cannot set selected mode with release 2.0R, i get similar problems using an archive viper 150, ncr810 and asus sp3g. st0(ncr1:5:0): illegal request st0: Cannot set selected modest0(ncr1:5:0): illegal request st0: Cannot set selected modest0: bad request, must be between 0 and 0 afterward a 'mt -f /dev/rst0 rewind' is enough to kick the drive/driver so i can use it. strange. Jonathan M. Bresler jmb@kryten.atinc.com | Analysis & Technology, Inc. | 2341 Jeff Davis Hwy play go. | Arlington, VA 22202 ride bike. hack FreeBSD.--ah the good life | 703-418-2800 x346 From owner-freebsd-questions Sat Jun 24 19:29:49 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id TAA04617 for questions-outgoing; Sat, 24 Jun 1995 19:29:49 -0700 Received: from mailrelay.pixi.com (sirius.pixi.com [140.174.243.101]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id TAA04608 for ; Sat, 24 Jun 1995 19:29:46 -0700 Received: by mailrelay.pixi.com (8.6.10/SMI-4.1) id QAA09148; Sat, 24 Jun 1995 16:30:13 -1000 Date: Sat, 24 Jun 1995 16:30:13 -1000 From: winky@pixi.com (Lawrence J M Lau) Message-Id: <199506250230.QAA09148@mailrelay.pixi.com> To: questions@FreeBSD.org Subject: HELP Sender: questions-owner@FreeBSD.org Precedence: bulk HELP I just bought a copy of FreeBSD 2.0 from Walnut Creek. When I get to the point where it asks me from what media I'm installing from and hit "CD-ROM", I get an error telling me that it cannot find the device. I have an SIIG, Inc. SCSI Controller SCSI-Pro VL card and a PLEXTOR 6X CD-ROM drive. Can somebody help me out? Are there device drivers being written for SIIG, Inc. components? Does FreeBSD 2.0.5 (info from Walnut Creek) support my components. Please e-mail me back at: winky@sirius.pixi.com Your suggestions, information, and help would be greatly appreciated. From owner-freebsd-questions Sat Jun 24 23:19:16 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id XAA11290 for questions-outgoing; Sat, 24 Jun 1995 23:19:16 -0700 Received: from genesis.ait.psu.edu (genesis.ait.psu.edu [146.186.142.4]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id XAA11284 for ; Sat, 24 Jun 1995 23:19:14 -0700 Received: from nbppp18.cac.psu.edu (nbppp18.cac.psu.edu [128.118.140.18]) by genesis.ait.psu.edu (8.6.12/8.6.12) with SMTP id CAA24680 for ; Sun, 25 Jun 1995 02:18:38 -0400 Message-Id: <199506250618.CAA24680@genesis.ait.psu.edu> Date: Sun, 25 Jun 95 06:22:15 0400 From: Thomas J Balfe Organization: The Pennsylvania State University X-Mailer: Mozilla 1.1N (Macintosh; I; PPC) MIME-Version: 1.0 To: questions@freebsd.org Subject: (no subject) X-URL: http://www.cdrom.com/support_page/freebsd_support.html Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=us-ascii Sender: questions-owner@freebsd.org Precedence: bulk Can FreeBSD keep track of kbytes transferred from specified directories? (httpd and ftpd) O,,,O (. .) ------.oOO--(_)--OOo.---------------------------- Thomas J Balfe The Pennsylvania State University tjb141@psu.edu http://www.catalog.com/nittany/tom.html -------------------------------------------------