Date: Mon, 4 Nov 1996 17:04:15 GMT From: Frank Terhaar-Yonkers <fty@cisco.com> To: freebsd-mobile@freebsd.org Subject: dealing with the 3c589 PC card Message-ID: <199611041704.RAA07380@fty-ss20.cisco.com>
next in thread | raw e-mail | index | archive | help
My apologies if this has been answered ...
I've got a Toshiba Tecra 500 with -current on it and I'm trying to get
the 3c589 talking.
1) It does work fine with winDOZE
2) Various drivers see the card at bootup (ze0, zp0 but not ep0)
3) I'd rather use the PCCARD stuff. From looking back thru FreeBSD-questions
it appears that PCCARD and zp0 are mutually exclusive. Yes?
Would some kind soul pls send me working a working set of config files?
It looks like I need: /etc/sysconfig & /etc/pccard.conf others?
tia - Frank
pccardc dumpcis sez:
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 89 05
PCMCIA ID = 0x101, OEM ID = 0x589
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 57
000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69
010: 6f 6e 00 33 43 35 38 39 00 54 50 2f 42 4e 43 20
020: 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32 61
030: 00 30 30 30 30 30 32 00 ff
Version = 4.1, Manuf = [3Com Corporation],card vers = [3C589]
Addit. info = [TP/BNC LAN Card Ver. 2a],[000002]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 02 03 00 00 01 03
Reg len = 3, config register addr = 0x10000, last config = 0x3
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 15
000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 7.0 x 100 ns
Card decodes 18 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: IOCK 1 4 5 6 8 10 11 12 14
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 03 01 71 55 26 26 54
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3
000: 00 00 ff
Tuple #10, code = 0x14 (No link), length = 0
Tuple #11, code = 0x10 (Checksum), length = 5
000: 89 ff 80 00 00
Checksum from offset -119, length 128, value is 0x0
Tuple #12, code = 0xff (Terminator), length = 218
000: 00 03 00 00 00 00 00 00 43 32 20 54 45 41 4d 2d
010: 45 61 72 6c 20 41 6c 64 72 69 64 67 65 2c 20 52
020: 65 78 20 41 6c 6c 65 72 73 2c 20 52 75 73 73 65
030: 6c 6c 20 43 68 61 6e 67 2c 20 44 61 76 69 64 20
040: 43 68 69 68 2c 20 48 65 72 6d 61 6e 20 4c 61 6f
050: 2c 20 47 65 6e 65 20 4c 69 6e 2c 20 4c 69 61 6e
060: 67 20 4c 69 6e 2c 20 48 69 65 6e 20 4e 67 75 79
070: 65 6e 2c 20 4b 61 70 20 53 6f 68 2c 20 47 61 72
080: 79 20 57 61 6e 67 00 ff ff ff ff ff ff ff ff ff
090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0d0: ff ff ff ff ff ff ff ff ff ff
2 slots found
\\\\////\\\\////\\\\\////\\\\\////\\\\////\\\\////\\\\////\\\\////\\\\////\\\\
Frank Terhaar-Yonkers
Cisco Systems, Inc.
Engineering Services, W2 F3 5
7025 Kit Creek Road PO Box 14987
Research Triangle Park, North Carolina 27709
fty@cisco.com voice (919)472-2101 FAX (919)472-2940
pager (800)796-7363 pin 100-8366 -or- fty@airnote.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199611041704.RAA07380>
